Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Two 5-foot nylon braided hoses connect household water supply to washer inlet valves. Replace cracked, leaking, or aging hoses to prevent water damage.
Watched u tube video. Ordered replacement water inlet valve and new hoses. Dismantled washer and replaced defective valve and installed new hoses. The repair went very easily and the washer worked perfectly as a result. Read more
Softener not dispensing or leaking before the wash? This dispenser restores proper rinse cycle release. Easy DIY fix with video guide included.
Replaced it. Read more
Contains two, six foot long braided hoses with 90 degree ends.
I had a problem with the drain pump on my Kenmore HE3 and I replaced it using a drain pump I ordered from APP. That fixed that problem but once I started running the washer I started getting a FH error code. I looked it up and found that it was a problem with the washer not filling properly. I pulled the washer out and found that one of the fill hoses had kinked when I pushed the washer back in place. There was also some writing on the hose that read "Change hose every five years". I know I had... Read more
Fix leaking or non-dispensing detergent issues with this washer dispenser assembly. Replaces failed cup doors and mechanisms. Simple DIY repair.
Replaced both assemblies Read more
Size: 29 1/4 inches x 31 1/4 inches. This universal washer drip tray is large enough for duet washers and sits under the washer to protect your floors from scuffs, spill, etc. Includes a PVC drain fitting.
Used from harness to top.
Fixing the problem was quite simple. First, I removed the lid assembly (thanks to the diagrams supplied by AppliancePartsPros.com!). Getting the back two screws out was very difficult because I couldn't see them from the front and I could not move the unit out of the enclosed space. After some trial and error, I located the screws which were 5/16 hex head screws and removed them with a MAGNETIC nut driver. (The magnet assures that the screw will not drop down into the mechanism). Second, I... Read more
Replacement control knob for dryers and washers. Installs on the control panel to adjust settings. Replace worn, broken, or missing knobs for reliable use.
Just put it on! No problem. Read more
This is a small tube of silicone-based gasket sealer used to bond and seal gaskets during washer repairs. It creates a watertight seal between mating surfaces to prevent leaks around tub components or pump housings. Use this adhesive when replacing gaskets or resealing joints where the original sealant has deteriorated and water is leaking.
Fix water dripping from the fresh fill valve when washer is off. This nozzle assembly directs water flow and prevents leaks caused by corrosion or damage.
Detergent dispenser assembly that holds and releases detergent at the right point in the wash cycle. Includes main wash and pre-wash compartments. Replace if dispenser door won't open or detergent isn't releasing.
This is the top panel that covers the upper portion of the washing machine cabinet, forming the main lid surface of the unit. It provides structural support and protects internal components from dust and moisture. Replace this panel if it is dented, rusted, cracked, or damaged - note that installation may require welding depending on how the original panel was attached.
I ordered a new top from AppliancePartsPros.com. I was confused about what to order, but a very helpful lady on Chat told me what to order. With regular shipping, the new part arrived in less than TWO DAYS. The part was exactly the right part, with all of the requisite holes, etc. My clothes washer now looks like new again! Read more
Machine screw that secures panels, brackets, and components in appliances. Replace when worn, stripped, or missing to restore tight fit and stability.
Fix fabric softener pooling in the cup or uneven conditioning. This washer dispenser assembly restores proper softener release during rinse cycles.
Hinge bearing supports your washer door for smooth operation. Replace if door sags, makes noise, or doesn't align properly. Confirm fit by model number.
Hardware washer distributes load under fasteners to prevent loosening and reduce vibration. Replace when missing or damaged to restore secure fit.
Watched a video online, the project took about 20 minutes, went well, parts fit good, the video was very helpful in getting the wash machine up and running. Read more
Color: Gray. Size: 13 oz. can. Used for coating the dryer drum interior. Acrylic appliance paint.
Completely removed dryer drum cleaned surfaces ready for paint applied paint acquired from you it did a wonderful job with one can of paint will use for a while and acquire another can of paint for second coat thank you so much for your help the whirlpool dryer drum paint was exactly what it said it would do Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.