Mvwb835dwo Parts

This control knob attaches to the appliance's control shaft so you can select settings with a solid, positive feel. Replace a cracked, stripped, or missing knob to restore smooth operation and a clean, finished look.

• Attaches to a switch or valve shaft to select temperatures, burner levels, or cycles
• Transfers your hand turn to the control shaft for accurate setting changes
• Common symptoms: cracked hub, spins without engaging, wobbly/loose, falls off, or missing
• Helps maintain a uniform appearance across the control panel

• Disconnect power (and shut off gas, if applicable) before servicing
• Pull the old knob straight off the shaft; avoid prying against the control panel
• Align the insert with the shaft's flats or splines and press straight on until fully seated
• Match position- and finish-specific knobs to the original on models that use different knobs per location

Replacement power cord for washers. Connects your appliance to the wall outlet. Replace if cord is frayed, damaged, cracked, or has exposed wiring.

This replacement screw fastens appliance components securely in place. Use it to replace missing, stripped, or corroded hardware so panels, brackets, and covers stay aligned and rattle-free.

• Secures parts such as panels, brackets, covers, or internal assemblies
• Restores alignment and helps eliminate vibration or rattling from loose hardware
• Replaces lost, rusted, or damaged screws during service
• Maintains safe, stable operation by keeping components tight

• Disconnect power before service; if applicable, also shut off water and/or gas
• Start threads by hand to avoid cross-threading; tighten snugly without over-torquing
• Use the correct driver bit to prevent stripping the head

The Wire Harness is an OEM part for Whirlpool washing machines. The wire harness is responsible for transmitting electrical signals that power components and allow them to communicate during each cycle.

Causes of a bad wire harness can be normal wear and tear over time, pinched or cut wires, or wire insulation breakdown due to heat or moisture exposure.

Symptoms of a bad wire harness include:

• Lights or display not working properly
• Washer not starting cycles
• Sensors or switches malfunctioning
• Intermittent operation

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Size: 1/4 inch hex head, 10-12 x 1/2 inch.

Cushions the washer lid when closing to prevent direct contact with the cabinet. Replace if cracked, worn, or missing to protect the lid finish.

The Screw is an OEM component compatible with Whirlpool washing machines. This screw secures the rear bulkhead to the tub, ensuring vibrations are reduced through solid mounting points. Properly installed screws dampen oscillating movement.

Causes of a bad screw include damage from water exposure like corrosion or breakage from stress concentrations if the tub bangs around during imbalanced loads. 

Symptoms of a bad screw include:

• Loose or detached rear bulkhead allowing side-to-side play
• Excessive noise and shaking felt through the surrounding walls   
• Development of micro-cracks around screw holes over time
• Potential leak paths if holes are no longer sealed 

This Whirlpool replacement screw restores a stable suspension system. It is compatible with additional brands like Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Two 5-foot nylon braided hoses connect household water supply to washer inlet valves. Replace cracked, leaking, or aging hoses to prevent water damage.

This is the main top panel that sits on top of the washer cabinet, forming the uppermost surface of the machine. It provides structural support and a finished appearance to the washer's exterior. Replace this panel if it is dented, rusted, cracked, or damaged from heavy use.

Contains two, six foot long braided hoses with 90 degree ends.

This replacement filter captures airborne grease and cooking particles from the vent system. It helps protect the blower and ducting and keeps airflow efficient so your hood or microwave-hood can clear smoke and odors more effectively. What it does:

• Traps grease and food particles to reduce buildup inside the vent path
• Helps maintain proper airflow and ventilation performance
• Replace when torn, warped, heavily saturated, or won't stay seated
• Common symptoms: lingering odors or smoke, greasy residue near the cooktop, visible damage to the filter

• 1 filter

• Disconnect power and allow the appliance and filters to cool before servicing
• Release the retaining tabs or latch and remove the old filter
• Seat the new filter fully and secure per your user guide
• Do not operate the appliance without all required filters installed

This is a sound-dampening pad that attaches to the washing machine to reduce noise and vibration during operation. It absorbs mechanical vibrations generated by the drum and motor, helping to keep the washer running quietly. Replace this part if you notice increased rattling, buzzing, or excessive vibration coming from the machine during wash or spin cycles.

This is a flexible drain hose that connects the wash tub or drain pump to the household drain system on a washing machine. It carries used water out of the machine during the drain and spin cycles. Replace this hose if you notice water leaking underneath the washer, kinks that restrict water flow, or cracks and brittleness in the hose material.

Used from harness to top.

Size: 29 1/4 inches x 31 1/4 inches. This universal washer drip tray is large enough for duet washers and sits under the washer to protect your floors from scuffs, spill, etc. Includes a PVC drain fitting.

If your washer isn't filling with water or cycles won't start, the wire harness may have failed. Connects electrical components for proper operation.