We use cookies and similar tools for site analytics and advertising. By using our site, you agree to this. See our Privacy Policy for details. Do Not Sell or Share My Personal Information
Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
This locking nut is used for many purposes on a range of machines including household appliances. This nut is often used for leg leveling for machines. It will help with vibrations from washers and dryers. If the nut is used for this purpose and goes missing or becomes damaged, it could cause the machine to vibrate more and seem louder.Nuts are made from metal and are built to last a long time. However, there can still be issues that arise. In some cases, the nuts might go missing if they become loose and the machine is moved. They could also corrode over time and need to be replaced. The replacement of the nut is typically a fast and simple repair.The nut is a genuine OEM replacement part sourced from the manufacturer. It can work with washers, dryers, and combo machines, and is compatible with models from Whirlpool, Kenmore, Maytag, and Roper. The part is sold individually. Owners may want to have several on hand.
Replaced 2 springs and brackets. Also replace rear legs and front legs and re leveled. Works fine. Read more
This replacement screw secures appliance components such as panels, brackets, and trim. Replacing a missing or damaged fastener restores a tight, rattle-free fit and helps keep your appliance assembled correctly after service or routine maintenance.
Took the back cover off, noticed the bolt holding the rotor on was broke off in the shaft which wore the stator and rotor. So I drilled out the broken bolt and extracted it with an easy out and replaced the stator the rotor and the bolt. Works great ! I maybe had 2 hours time in it and that includes taking it out of the laundry room and into the garage to work on it and back. Read more
The Shock Absorber is an OEM part compatible with Whirlpool washing machines. It is a crucial component that helps reduce vibrations and dampens movement during the spin cycle. The shock absorber absorbs mechanical stresses to prevent the washer tub, suspension springs, and other components from wearing out prematurely.
Causes of a bad shock absorber include wear and tear over time, cracks or breaks from heavy loads, or damage due to impact.
Symptoms of a bad shock absorber include:
This OEM replacement is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Took apart replaced spring Replaced seal Read more
The Drain Hose is an OEM part for Whirlpool front-loading washers. This hose is responsible for transporting water from the washer tub out to the household plumbing drain.
Causes of a bad drain hose can include cracks developing over time due to the constant cycle of filling and emptying during normal operation. Mineral or lime buildup inside the hose may also cause blockages.
Symptoms of a bad drain hose include:
This OEM part is compatible with some KitchenAid, Jenn-Air, and select Kenmore models.
Extends your washer's drain hose to reach distant standpipes or sinks. Includes coupler and clamps. Replace when you need extra length for installation.
Attached drain hose extension and it more than reached the drain. Read more
This cap is a small protective cover used in select appliances. It helps secure and seal its mating component, preventing leaks, debris intrusion, or loosening during normal operation.
Removed the back cover. (Glad I used my power tool to remove all the screws) I then removed the sheared off part of the bolt using drill and easy-out tool. It was a straightforward install of the new bolt. I added a little bit of blue Loctite even though the bolt already had some dry thread sealer. I torqued it down enough to hold everything snug. I also replaced the cap on the water pump filter as I cracked it when I removed it. Tip: Don't use pliers even with a rag to cushion or be more... Read more
Secure brackets and hardware for stacking a dryer on top of a front-load washer. Needed when vertically installing units to save floor space.
No one locally had any stack kits, nor could they tell me if it was even possible to stack appliances of differing models. Your technician took the time to help solve the problem. The stack kit fits perfectly. Read more
This hose clamp secures a hose connection to prevent leaks and keep your appliance running smoothly. It provides a tight, reliable hold on the hose fitting so water or air stays contained during operation.
Took off cover, installed new parts. Read more
This is a plastic air dome that traps air and transmits water pressure changes to the pressure switch, which controls the water level inside the washer tub. It connects between the tub and the pressure switch hose. Replace this part if the washer overfills, underfills, or does not fill at all, as a cracked or clogged air dome prevents accurate water level sensing.
Opened the back of machine and saw that a mouse had eaten holes in all but one of the rubber hoses. Took the top off the machine for better access. Appliance Parts Pros were the only company I could find that had all the pieces I needed in stock. Quick and easy to order online and fast shipping. Replaced the damaged hoses. Everything fits great and was easy to install. Definitely a diy project. I have even booked marked Appliance Parts Pros. Thank you Appliance parts Pros. Read more
Shipping bolt kit secures the drum during transport or when laying washer on its side for pedestal installation. Replaces lost or discarded bolts.
Used shipping bolts to enable washer to be turned onto it's side. Read more
This replacement screw secures appliance components and panels so they stay aligned and rattle-free during operation. Replace stripped, missing, or corroded hardware to restore a tight fit and dependable performance. What it does
Ordered parts and hubby replaced and now it works. Thanks. Read more
This is a thermistor-style temperature sensor that monitors the water temperature inside the washer tub. It sends resistance readings to the control board so the machine can regulate water heating and cycle temperatures. Replace this sensor if your washer fills with the wrong temperature water, displays temperature-related error codes, or fails to heat water properly.
When I finally received it 2 1/2 weeks later, I unplugged the old one and installed the new one. Read more
This replacement filter traps debris and contaminants within your appliance's system to help protect internal components and maintain proper performance. Swapping a clogged or damaged filter can restore flow/airflow, reduce odors and buildup, and support efficient operation. What it does:
Washer water heater element raises water temperature during wash cycles. Replace if cracked, corroded, or no longer heating properly in your machine.
Secures washer tub during transport to prevent internal damage. Install in back panel before moving. Replace if missing, rusted, or corroded. Set of 4 required.
Secures washer base frame during transport and installation. Replace if bolt is lost, stripped, or damaged during delivery or moving to prevent rocking.