Pdw7300 Parts

Connects dishwasher wiring to the water inlet valve. Replace if the plug is burnt, brittle, loose, or corroded to restore a secure electrical connection.

Grinding noise during drying cycle? This vent door actuator opens and closes the dishwasher vent for proper airflow. Easy DIY fix, one screw install.

This rubber seal connects the dishwasher's wash pump motor to the tub assembly. Replace if you notice water leaking from beneath the dishwasher or around the pump motor area.

This dome float is the replacement water-level float that helps the appliance sense and control the tub's water level, restoring reliable fill and shutoff behavior. Use this OEM-fit float when the original is cracked, stuck, or missing. What it does:

• Moves with rising and falling water to actuate the water-level mechanism and help prevent overfilling.
• Can reduce symptoms such as improper fill levels, continuous filling, or intermittent fill shutoff when the existing float is damaged or obstructed.
• Works as part of the washer's water sensing system—does not include electronic switches or housings unless shown.

• Disconnect power and unplug the appliance before starting any repair.
• Access may require removing the washer top or cabinet; follow your model's service instructions.
• Inspect surrounding hoses and clips; replace any damaged components and ensure the float moves freely.

Size: 10-16 ab.

Secures hose connections to prevent leaks in your dishwasher. Replace if water pools under the unit or connections feel loose. Confirm fit with your model.

Rubber grommet cushions and seals dishwasher components. Replaces worn, torn, or missing grommets to restore proper fit and reduce vibration noise.

This is a white self-tapping screw (size 8-18, 1/2 inch long) used to fasten panels or components within the dishwasher. The white finish helps it blend with light-colored interior or exterior surfaces. Replace this screw if it is stripped, missing, or corroded, which can result in loose or unsecured parts.

This is a glass multi-purpose shelf designed to sit inside the dishwasher dishrack, providing an additional flat surface for cups, small bowls, and other lightweight items. It helps maximize loading capacity by creating a second tier within the rack. Replace this shelf if it is cracked, chipped, or broken, which can cause items to fall through or not wash properly.

Secure wire harnesses in your dishwasher with this harness clip. Replace if wires are loose or clip is broken. Verify fit with your model number.

Replacement hex head screw for dishwasher component mounting. Secures solenoids, valves, and internal parts. Order when original is rusted, stripped, or missing.

White plastic trim ring that fits around the dishwasher tub opening. Restores appearance and maintains fit between tub and cabinet. Replaces worn or cracked trim.

White trim flange that snaps around the dishwasher tub opening to cover exposed edges. Replace if cracked, broken, or missing to restore appearance.

This is a small flapper valve located in the dishwasher vent assembly that opens to release steam and hot air during the drying cycle. It closes during wash cycles to prevent water from escaping. Replace this flapper if dishes are not drying properly, if you notice steam leaking during the wash cycle, or if the flapper is warped, cracked, or stuck.

Dishwasher dishrack finger indexer snaps onto the rack to help guide and position dishes during the wash cycle. Replace if broken, cracked, or missing.

This vent flapper is the exterior exhaust flap that opens to let dryer air and lint exit and closes to keep weather, pests and drafts out when the dryer is off. It restores proper airflow at the outside vent hood. What it does:

• Opens with dryer airflow to allow exhaust to escape and closes when idle to block outside air.
• Helps prevent backdrafts, pests and rain from entering the vent system.
• Can restore normal drying performance when a stuck or broken flap was restricting airflow.
• Commonly replaced when the flap is cracked, warped, jammed or does not seal.

• One vent flapper/exterior exhaust flap.

• Disconnect power to the dryer (and gas supply if applicable) and work from the outside hood when possible.
• Remove the exterior vent hood or access cover to inspect and replace the flap; basic hand tools required.
• Check that the flap moves freely after installation and seats against its seal to prevent air leaks.
• Clean or repair the ductwork to avoid repeat failures.