Pfss6pkx Parts

This dispenser cover assembly replaces a cracked or damaged dispenser housing cover to restore a clean appearance and help the dispenser direct ice and water properly. Molded plastic protects internal components and maintains dispenser alignment. What it does:

• Covers and protects the dispenser opening and internal components from dirt, moisture, and impact.
• Helps guide ice and water to reduce jams, misfeeds, and drips at the dispenser opening.
• Restores appearance when the original cover is cracked, split, or cosmetically damaged.
• Seats into the dispenser housing using factory clips and mounts to maintain proper alignment.

• Disconnect power and shut off the water supply before servicing to prevent shock and leaks.
• Remove dispenser trim or inner door panel to access the cover; support the door/trim while working.
• Handle plastic clips and tabs carefully—damaged clips may require replacement.
• After installation, restore power/water and test the dispenser for proper function and leaks.

This PTC-style start relay mounts on the compressor and briefly powers the start winding so the compressor can start reliably. Replacing a weak or heat-damaged relay can restore cooling performance and stop repeated clicking from the compressor area.

• Supplies momentary power to the compressor's start winding at startup
• Opens automatically as the PTC warms, removing the start winding from the circuit
• Symptoms of a failing relay: compressor won't start, repeated clicking/humming, and rising temperatures
• Visual clues can include discoloration, melting, or a burnt odor on the relay housing

• Disconnect power and remove the rear lower access panel to reach the compressor
• Note wire locations and terminal orientation before removal; transfer wires one-for-one
• Push the new relay fully onto the compressor pins until seated securely
• Inspect the overload protector and wire terminals for heat damage; replace any burnt connectors before restoring power

This is the door gasket for the refrigerator (fresh food) compartment. It creates an airtight seal around the door to keep cold air in, reduce moisture, and help maintain proper temperatures.

• Seals the fresh food door perimeter to prevent air leaks
• Helps reduce condensation, frost, and temperature swings
• May help if the door won't seal, the gasket is torn, or food is warming
• A worn or deformed gasket can increase run time and energy use

• Unplug the appliance before service
• Warm the new gasket (hair dryer on low or warm water) to relax folds
• Transfer any retainers if applicable; seat the gasket fully into the channel
• Check door alignment and adjust hinges if needed for proper seal

This drain line assembly routes condensation/defrost water from the refrigerator cabinet to the rear drain pan. Replacing a cracked, warped, or clogged line restores proper drainage and helps prevent interior leaks and ice buildup.

• Directs meltwater from the evaporator drain to the condenser/drain pan
• A restricted or damaged line can lead to water under crispers or on the floor
• Ice sheet forming at the bottom of the freezer is a common sign of a blocked drain
• Restores correct moisture management and helps reduce odors from standing water

• Unplug the refrigerator and turn off the water supply if applicable
• Pull the unit forward and remove the lower rear access cover to reach the drain outlet and pan
• Place a towel, disconnect the old line, clear any ice/debris in the drain channel, and seat the new line fully
• Route the tube into the pan without kinks, reassemble, and verify flow by pouring warm water through the interior drain

This is an evaporator cover and fan assembly that is used for the fresh food sections on refrigerators. This component makes up the back wall of the fresh food compartment and circulates the air over the evaporator to keep the food longer. If food is not staying as fresh for as long, it's a good idea to check this part for any damage and to ensure that it is working properly. The motor makes noise, such as a high pitched sound, if the evaporator fan motor is going bad. If that's the case, the entire evaporate and fan assembly will need to be replaced. Disconnect the refrigerator from its power source before replacing this part. Wear work gloves to protect the hands during this process.This evaporator cover and fan assembly is sold individually. It's a genuine OEM part that comes straight from the manufacturer. This part is compatible with refrigerators that are manufactured by GE.

This freezer thermistor is the temperature sensor located in the freezer compartment. It sends temperature feedback to the control so the compressor, fan, and defrost cycle operate correctly, helping maintain consistent freezing performance and stable food storage.

• Monitors actual freezer temperature and changes resistance to signal the control board
• Helps regulate compressor and evaporator fan operation to achieve the set temperature
• Provides input for defrost timing to limit frost buildup and avoid warm swings
• Common failure symptoms: freezer too warm or too cold, temperature fluctuations, long run times, or excessive frost

• Unplug the refrigerator before servicing; work with dry hands and proper lighting
• Access the freezer sensor location; note original orientation and wire routing
• Transfer any mounting clip/holder to the new sensor and seat the connector fully; route wires exactly as original to avoid damage
• Restore power and allow up to 24 hours for temperatures to stabilize

This dispenser cover assembly restores a clean, secure front to the refrigerator's ice/water dispenser area. It protects internal components and provides the finished bezel for the user interface on the freezer door.

• Covers and protects the dispenser compartment and wiring
• Provides the front bezel for dispenser selections and indicators
• Helps keep internal components aligned and securely mounted
• Common symptoms: cracked or missing bezel, broken tabs, loose/rattling panel, worn appearance

• Disconnect power before servicing
• Remove the drip tray and any retaining screws/clips; carefully release the old cover
• Transfer existing controls/electronics and hardware to the new cover
• Reinstall cover and fasteners; restore power and test dispenser functions

This is a control board for refrigerator units. This part controls all of the functions of the refrigerator. These functions include cooling, defrost times, alarms, lights, and more.If the buttons do not allow the user to change any of the controls or functions, it is likely that this part will need to be replaced. Some users report the refrigerator being stuck in a certain setting for an extended period of time. This is a high-quality replacement part. Be sure to disconnect the refrigerator from its power source prior to attempting to repair or replace this part. Wear gloves during the process for safety.This specific control board is compatible with refrigerators that are manufactured by the GE brand. It is sold individually and comes directly from the manufacturer.

This wheel axle secures a small drawer, bin, or shelf wheel to its rail or bracket in compatible refrigerators, helping restore smooth gliding and proper alignment when the original axle is worn, cracked, or missing.

• Holds the wheel in place so drawers/bins roll smoothly along their tracks
• Helps maintain alignment and prevents wobble or binding
• Replace if the axle is broken, loose, or the wheel repeatedly falls off
• Symptoms can include stiff or uneven drawer movement, scraping, or a missing wheel/axle

• Unplug the refrigerator and remove food from the affected drawer/bin
• Remove the drawer/shelf to access the wheel and axle
• Use needle-nose pliers to release and remove the damaged axle; align components and press the new axle fully into place
• Inspect the wheel and track; replace any worn parts to ensure smooth operation

This water line connector links the refrigerator's water supply tubing to the appliance, restoring a secure water feed for the dispenser and ice maker. A direct-fit replacement that fixes loose or damaged supply connections. What it does:

• Provides a sealed connection between the supply tubing and the refrigerator water system
• Stops leaks caused by cracked, broken or loose connectors
• Restores proper water flow to the dispenser and ice maker when the original connector fails
• Fits the original mounting/location for a direct replacement

• One water line connector

• Turn off the water supply and unplug the appliance before installing
• Inspect tubing for damage and cut back to clean pipe if necessary; ensure proper seating of tubing in the connector
• Hand-tighten fittings; check for leaks after restoring water and power

This motor cover protects the damper motor assembly, keeping the motor and linkage free from debris for reliable vent operation. It helps shield internal components to reduce wear and prevent foreign object interference. What it does

• Guards the damper motor and linkage from dust, crumbs and other debris
• Maintains proper clearance around the motor to help consistent damper movement
• Can reduce rattling or contact noise caused by loose components
• Useful when replacing a cracked, broken or missing motor cover

• One motor cover

• High-level replacement: remove power, access the damper assembly, remove fasteners, swap the cover, and reassemble
• Always disconnect power before servicing to avoid electrical shock
• Keep track of screws and any small parts during disassembly
• If the damper motor or linkage are damaged, replace those components rather than relying on the cover alone

This is a self-tapping screw used to secure appliance panels and small components. It provides a reliable hold in sheet metal and plastic mounting points to restore proper fit and prevent rattling or loose parts. What it does:

• Fastens trim, brackets, and light-duty panels where a tapped hole is needed
• Creates its own threads in thin metal or plastic mounting points
• Helps stop vibration-related noise by securing loose panels
• Commonly used during repairs of control panels, inner liners, and external trim

• One tapping screw as shown

• Use the correctly sized screwdriver or bit to avoid stripping the head
• Drive straight and stop when snug; over-tightening can strip the mating material
• Turn power off and unplug the appliance before accessing internal panels
• If the original hole is damaged or oversized, consider using a slightly larger fastener or repair insert per manufacturer guidance

This wheel axle is the replacement shaft that secures a dryer drum roller wheel, helping the drum turn smoothly and quietly. It restores proper wheel alignment to reduce wobble, noise and uneven drum movement. What it does:

• Holds the drum roller wheel in place so the dryer drum rotates evenly
• Restores stable drum support to reduce scraping, squeaking or grinding sounds
• Helps prevent premature wear on the roller wheel and drum bearing
• Supports smooth drum rotation to improve drying consistency

• One wheel axle

• Disconnect power before beginning any repair; follow all safety precautions
• Access may require removing the dryer front panel or drum
• Inspect roller wheel and surrounding components; replace worn parts together for best results
• Tighten and align components per OEM guidance; avoid forcing parts to prevent damage

This grommet cover slide is the small trim piece that secures and protects the refrigerator/freezer slide mechanism, helping prevent rattles and keeping the drawer moving smoothly. It restores proper fit and quiet operation. What it does:

• Covers the drawer/slide opening and protects the slide mechanism from debris and wear
• Helps reduce vibration and noise caused by loose or damaged trim
• Keeps the slide aligned for smoother drawer movement
• Commonly replaced when cracked, broken, or missing from the slide area

• Basic removal and replacement; usually snaps or screws into place—no special tools typically required
• Inspect mating slide and surrounding trim for damage before installing
• Disconnect power only if working near electrical components or lights; otherwise power disconnection not usually required

This evaporator fan assembly circulates cold air from the freezer evaporator to help maintain even temperatures and proper cooling. Reliable airflow helps reduce frost buildup and keeps food frozen. What it does:

• Moves cold air across the freezer evaporator coil for consistent temperature distribution
• Helps the refrigerator reach and maintain set freezer temperatures
• Supports proper defrost cycle performance by circulating air after defrost
• Commonly replaces noisy, non-spinning, or intermittent freezer fan operation

• Disconnect power before beginning any repair to avoid electrical shock
• Access typically requires removing interior freezer panels; handle evaporator fins and fan blade with care
• Secure mounting screws and wire connectors exactly as removed; do not force connectors

This is a GE refrigerator right drawer slide rail. The drawer slide rail makes opening the refrigerator drawers easier by providing them a track to slide on. If the drawers on the refrigerator have gotten hard to open or are jammed, the problem is most likely with the slide rails. These parts can become damaged over time from general wear or overuse. Any heavy impacts could also bend or warp these rails, warranting the need for a replacement. Do not attempt to bend the drawers to fit the rails, as this may cause further damage. To install the new slide rail, make sure the old one is removed, and the holes for the screws are clear. The new part should come with new fastening screws. Line the rails up with the corresponding holes and insert the screws one by one. Insert the second slide piece onto the drawer with the appropriate screws for this piece. Tilt the drawer at an angle and position the rollers into the rail and slowly insert the drawer.This is a genuine OEM replacement product sourced directly from GE. This part is compatible with GE and Hotpoint appliances.