Pfss6pkx Parts

This rubber grommet seals the suction/water pipe where it passes through the appliance cabinet to reduce leaks and dampen vibration. It restores a tight, durable seal to help prevent water intrusion and rattling. What it does:

• Cushions and seals the suction/water pipe where it passes through sheet metal or plastic.
• Reduces vibration and pipe movement that can cause noise or wear.
• Helps prevent water leaks or moisture entry at the cabinet penetration.
• Maintains a proper fit for tubing routing and component alignment.

• One rubber suction pipe grommet.

• Disconnect power and shut off water supply before servicing.
• Remove access panels as needed to reach the pipe penetration; press grommet into opening and route pipe through center.
• Replace any brittle, torn, or deformed grommets; do not force a damaged grommet into place.

This freezer evaporator fan motor assembly drives the fan that moves cold air across the evaporator coils and circulates it through the cabinet. Replacing a weak or failed motor restores airflow for more consistent, reliable cooling performance.

• Circulates air across the evaporator coil to remove heat from the freezer
• Helps distribute cold air to maintain stable temperatures
• Common symptoms: fan not running, intermittent operation, loud squealing/rattling, weak or no airflow from vents, warmer-than-normal temperatures
• Supports proper defrost airflow around the evaporator area

What's included: 1 freezer evaporator fan motor assembly Install notes:

• Unplug the refrigerator before servicing; wear cut-resistant gloves
• Remove freezer contents/shelves and the rear panel to access the motor
• Note wire connector orientation and routing; keep wiring clear of the fan path
• After mounting, ensure the fan spins freely; restore power and verify airflow

Water filter head and tubing assembly holds the water filter and connects the water lines to the water filter. Approximate dimensions: 10.5" x 10.4" x 4.6"

This is the left-side freezer evaporator fan motor. It spins the fan to draw air across the evaporator coil and circulate cold air, restoring proper airflow, quieter operation, and stable temperatures when the original motor is weak, seized, or noisy.

• Circulates air across the freezer evaporator coil to move cold air through the compartment
• Supports even cooling and temperature recovery after door openings
• Helps limit frost buildup on the back panel by keeping air moving
• Failure symptoms include weak or no airflow, loud or intermittent fan noise, rising freezer temperature, or soft/melting ice

• Disconnect power before servicing; wear cut-resistant gloves
• Remove freezer drawers/shelves and the rear panel to access the motor
• Note wire orientation; transfer the existing fan blade and any reusable mounting hardware from the old motor
• Ensure the blade spins freely and the shroud is clear before restoring power and checking airflow

This damper motor assembly controls the refrigerator air damper to help regulate airflow between compartments, restoring proper temperature balance and reducing uneven cooling when the original motor fails. What it does:

• Moves the air damper to open or close airflow between freezer and fresh-food sections
• Allows the fridge control to direct colder or warmer air as needed for temperature regulation
• A faulty unit can cause symptoms like warm or inconsistent fresh-food temperatures, reduced cooling performance, or unusual clicking/noise at the damper area

• Disconnect power before starting; work on powered appliances can cause shock or injury
• Access typically requires removing interior panels or shelving to reach the damper housing
• Align the motor drive and damper linkage; don't force gears or clips when installing
• After installation, restore power and verify damper movement and temperature control operation

This compressor overload is the start-protection device that helps the refrigerator compressor run safely and restart after an overcurrent or overload. Replacing a faulty overload restores reliable compressor starting and helps protect the compressor motor. What it does:

• Protects the compressor by interrupting power during an electrical overload or locked-rotor condition
• Works with the start relay to allow the compressor motor to start and run properly
• Common symptom: refrigerator not cooling because compressor won't start
• Other symptom: humming or buzzing from the compressor or intermittent starting

• One compressor overload (start device)

• Disconnect power to the appliance before servicing to avoid shock or injury
• Handle terminals carefully; install on the compressor per OEM orientation and secure connections

A self-tapping screw used to fasten appliance panels and components where a threaded hole is formed as the screw is driven. Provides a secure hold for trim, brackets, and light assemblies during repairs. What it does:

• Cuts its own mating thread in sheet metal or thin plastic to secure panels and brackets
• Helps hold trim, access panels, or internal components in place
• Commonly used where a tapped hole is not present or repair requires a replacement fastener
• Can prevent loose parts and rattles caused by missing or damaged screws

• Unplug the appliance before servicing to avoid electrical or mechanical hazards
• Use the correct screwdriver or bit to avoid stripping the screw head
• Start the screw straight and apply steady pressure; do not overtighten to avoid cracking plastic or stripping metal
• Replace only with the exact part number to ensure proper fit and function

This roller supports the vegetable/crisper drawer so it slides smoothly in and out of the refrigerator. It replaces worn or broken rollers to restore proper drawer movement and reduce sticking or catching. What it does:

• Replaces a damaged or worn roller that prevents the veg/crisper drawer from sliding smoothly
• Helps eliminate drawer binding, uneven travel, or noisy movement
• Supports the drawer weight and keeps the pan aligned on its track

• Disconnect power to the appliance before starting any repair
• Remove the crisper/veg drawer and housing per your model's instructions to access the roller
• Roller typically snaps into a bracket or slides onto a pin; inspect mating parts and replace any broken clips

This condenser fan assembly circulates air across the condenser coils to help remove heat from the refrigerator, improving cooling efficiency and system performance. Replaces a worn or noisy condenser fan to restore proper airflow. What it does:

• Spins the condenser fan blade to move air over the condenser coils, aiding heat rejection
• Commonly fixes symptoms like reduced cooling, warm interior, or a loud/grinding fan noise
• Prevents condenser overheating and helps maintain compressor efficiency
• Operates whenever condenser cooling is required (fan cycles with system demand)

• Disconnect power before servicing to avoid electrical shock
• Handle metal edges and fan blades carefully to prevent cuts
• Verify connector orientation and secure mounting to eliminate vibration or noise