Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Secures the crisper cover slide for smooth, aligned operation. Replace if broken or missing to restore proper drawer function. Confirm fit with your model.
Shelving went in without a problem. Very simple. Checked the installation video anyway in case there was a trick to not breaking something. Learned that the nylon clips needed to be transferred and found one missing on another shelf, so ordered a replacement. The water valve was one I replaced some time ago but one of the solenoids was bad, confirmed with a meter (ohm reading is between 200-500; less than 200 or more than 500 is broken). Replaced it without a problem (becoming expert at... Read more
Specs: Hex head ,1/4-20 x 5/8
My 10 year old frig door was hanging down to the point it wasnt fully closing and sealing unless you picked up on it. I ordered a lower hinge bracket, upper and lower bearing, and spacer. My bracket was bent down a little due to my kids hanging on the door when looking at the bottom shelf and i discovered my bracket was held on by only two bolts when there was supposed to be three. I ordered a bolt too. I was able to remove the bottom hinge, remove door to replace upper and lower bearing and... Read more
Mounts freezer baskets to the interior freezer wall for organized storage. Replace if cracked, broken, or missing to restore proper basket support.
I was able to view the video then order parts on Appliancepartspros.com. Initially, I received the wrong part but we were able to resolve the issue quickly and I fixed my issue in 10 minute with the right part. Read more
Fix ice dispensing issues caused by bent or dull crusher blades. This blade restores smooth crushed-ice flow. Quick DIY replacement with video guide.
I ordered (3) new replacement blades and received them in two days! Read more
Upper door hinge for refrigerator fresh food and freezer doors. Replaces broken, bent, cracked, or missing hinges from moving or wear.
Ordered replacenent. Read more
Fix a refrigerator that beeps continuously, won't dispense ice or water, or shows unresponsive controls by replacing the control board. Moderate DIY repair.
First, I will never, ever make the mistake of unscrewing anything on an appliance while it is still connected to power - what started as a cosmetic fix on the freezer door ended up costing me $340 to fix after I shorted out one of the boards for the dispenser. Replaced both the Ice dispenser power board and Ice dispenser control board. I tried to get information on how to test which of my boards had gone bad, since these are pricey parts, but could not find a reliable way to test. And since... Read more
Replacement mounting screw for refrigerators and freezers. Secures shelves, handles, panels, and brackets. Replace missing, stripped, or rusted screws.
Ice dispenser not dispensing or crushing properly? The drive cam transfers motor rotation to advance the ice dispensing cycle. DIY repair in 30-45 minutes.
Initially I noticed the crusher drum was cracked and broken so I replaced the drum the retaining nut on the end of the auger and the circlip and washer. it worked fine for a time and then the drum began free wheeling. upon further inspection I discovered the retain nubs on the auger had worn down allowing the blade to slip down the auger body. so I replaced the auger, drum, drive blade, and drive cam. I recommend if you gave a problem with the ice dispenser you break down and inspect the entire... Read more
Freezer drain tube that channels defrost water from the drain pan to the drip pan. Replace if cracked, leaking around the grommet, or causing floor leaks.
Replaced it Read more
Aluminum strap secures the defrost heater against the evaporator coil. Replace if broken, cracked, or missing to maintain proper heater contact.
Removed the freezer shelves and back panel, evaporator coils were frozen with ice. Defrosted coil and removed defrost heater connectors, measured no continuity in the heater and ordered a replacement. Also discovered the aluminum retention strap was broken and the heater had slipped down in it's position, ordered and replacement strap. Re-installed new heater and strap per the video instructions, repair complete. Most difficult steps were drilling out the drain pan rivet and re-threading... Read more
A light socket that holds the bulb in your refrigerator's freezer compartment. This electrical component provides power to illuminate the freezer interior when the door opens. Replace it when the freezer light won't turn on, flickers, or the bulb won't stay securely in place.
Bypass cap replaces water filter when using external filtration or no filter needed. Allows ice maker and water dispenser to function normally.
This website was very informative, has videos with detailed instructions. The shipping is fast and was a good experience. I will be referring them to others and keeping it bookmarked in case I need it again. Read more
Factory replacement screw for securing panels, brackets, and trim inside your refrigerator. Needed when original screws are missing, stripped, or corroded.
Bought replacement part, exact fit. 2 screws out, 2 screws in EASY PEEZY. Hardest part was finding my 3/8 socket and waiting for the part which came way faster then expected. This is 2nd time APP saved me. Last time was for a 37 dollar relay that my appliance guy told me was my compressor. He told me to buy a new fridge because he wasn't going to replace the compressor. That was 3 years ago, :) Read more
Small spring that provides return tension for refrigerator actuator lever mechanisms. Replace if spring is broken, stretched, missing, or lost during repair.
Water inlet tube connects the water valve to your ice maker. Replace if cracked, leaking, or damaged. Installs at the back of your refrigerator.
I replaced the valve that turns the water flow on/off to the door and to the ice maker. It was allowing water to seep internally past it's seals. Replacing the valve solved both problems. Simple job, no more than 10 minutes start to finish.. Read more
This replacement screw secures designated components in your appliance to maintain a tight, rattle-free fit. Replacing missing or stripped hardware restores proper attachment and helps keep panels and trim properly aligned.
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.