Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Replacement drip tray for refrigerator water and ice dispensers. Catches drips and spills at the dispenser. Replace if cracked, broken, or stained.
Watched your videos and easily replaced the solenoid, spring, flapper etc. The only reason it took me as long as it did is I have a GE monogram side-by-side in cabinet refrigerator. It is stainless steel and required me to take off all of the stainless steel skin on the freezer side door. While this was not that difficult it was time-consuming. Read more
Secures the auger shaft in the icemaker assembly. Replace if stripped, cracked, or loose, preventing proper ice transport from bin to dispenser.
I looked for a site that sold replacement parts for my make of GE refrigerator. I found AppliancePartsPros, and was very surprised at how organized it was. By entering the model number of my refrigerator, I was shown a set of (approximately) 8 general parts diagrams for my refrigerator. I chose the ice making/dispensing diagram. I matched the part that shattered (from use) to what was on the diagram. What I didn't know was how to install the part. I saw references by other customer comments to... Read more
Replacement evaporator drip pan for GE refrigerators. Collects defrost water beneath the evaporator. Replace if cracked, rusted, or leaking onto shelves.
Suspected a clogged condensation drain line. Took out all the shelves and drawers, condensation unit is toward the bottom of the frdige on inside, I could see that there was ice build up. I unplugged fridge, placed fan in firdge to speed up the thawing of the built up ice. After ice melted enough, I could get face panels and foam off to see that icing caused a backup in drain line, which led to water sitting in trough pan, rusting the trough pan. Rust then accumulated in the drain line,... Read more
Fixes freezer or fridge light staying on, or ice dispenser not working when door closes. Simple 5-minute DIY fix with putty knife—video included.
Pop out the old switches with a putty knife pressing down on the tab, grabbed with pliers to pull out, disconnect the wires and connect new switches, pressing back in place. Read more
Spring that controls dispenser arm movement in refrigerators. Installs on the paddle assembly. Replace if broken, detached, or missing to restore arm function.
I order both the paddle and spring and watched a video on how to remove the operating panel to replace them Read more
Replace your refrigerator's middle drawer assembly if cracked, broken, or the handle has snapped off. Provides organized storage for produce and deli items.
I shopped around to find the best prices and at the same time, the most reliable live/ via phone assistance in being sure I got exactly the right parts. Your guy was great and the parts were shipped promptly. So there was no "repair!" Simply pulled out the old drawers, and put them in the recycle can! Nw ones slid right into place. I also noticed the new ones had sturdier "stops" at the back edge of the drawers. Suspect this was a common complaint and replacement. Read more
Replaces broken or cracked door closure lever assembly in your refrigerator. Installs at base channel under kickplate to help doors close properly.
Replaced upper and lower thimble's, lever arm, cam closure. Door stop was not the problem, but ordered it and replaced it too. The door of course has to come off, remove the top hinge, and lift it away. Lubricated moving parts with silicone spray. Be sure and put the door back in the open position, so the lever arm and cam closure can properly interact, then close the door. Remove the plastic grate at the bottom to get at the lever arm. Presto. Problem gone. Don't put excessive weight... Read more
Replacement rear wheel for refrigerators. Mounts to the bottom rear frame to enable smooth rolling for cleaning and repositioning. Order if cracked or missing.
The front wheel assembly replacement (WRXO2X12454) was straightforward and easy to do. Took maybe 30 minutes start to finish. The rear wheel assembly (wheel WRO2X10695 and axle WRO1X10604) that was more involved as the original wheel axle is actually a rivet that you have to cut out. 1. I used a vibrating multitool with a carbide blade to cut the axle out. Had to use a pair of vise grips to hold the rivet to keep it from spinning while cutting it. 2. The new axle I drilled a 2mm hole thru the... Read more
Left side glide rail for refrigerator ice bucket. Mounts to freezer wall to support and guide ice bucket. Replace if cracked, broken, or missing.
It was quick and simple to replace. There were a couple screws holding it in place ant the repair was completed in less than 10 minutes. Appliance Parts Pros exceeded my expectations by delivering my part sooner than expected. Read more
Replaces a worn or broken door closure cam on your refrigerator's fresh food door. Installs at the bottom of the door to engage the latch mechanism.
Replacement door closure spring for refrigerator hinges. Installs on door hinge assembly to provide tension for proper closing. Needed when broken or worn.
I replaced the lever asm. and spring Read more
Pan cover wheel for refrigerator fresh food drawers. Replace this roller if worn, cracked, or broken to restore smooth drawer sliding and support.
Used the schematic provided to select the parts needing replacement and placed the order. Parts arrived and swapping new for old was simple. For the most part it was a matter of taking out the old and putting in the new. There were a few screws with wheels to replace but that was easy as well. Before purchase I searched several different sites and found all the parts needed. I compared prices of each item as well as shipping cost. Prices for each item were nearly identical between sites... Read more
Clear plastic door cover for the dairy compartment in your refrigerator door. Replace if cracked, broken, or missing. Snaps into place, no tools needed.
The door from ApplianceParts Pros snapped into place easily and corrected the problem. Read more
Replaces a broken or worn freezer door cam closure on side-by-side refrigerators. Installs on the door to control opening range and secure latching.
Watched an online repair video first. Then removed hex head screws on bottom of door. Replaced broken part. Read more
Fix inconsistent temps or ice buildup on evaporator coils? This sensor seal protects accuracy. DIY-friendly with wire splicing. Video guide available.
This fridge has had a problem of ice building up around evaporator coil in fresh food side. Wife (she HATES this thing) says it's done this from day one; 10 years. GE guy says all these models do this and there's no fix for it, so we have clean out the ice periodically... Like the 1940s pre auto defrost. Now with the issue of FF side temp too highi assumed the ice had built up around FF evaporator coil preventing proper cooling, but AppliancePartsPros.com suggested the FF temp thermistor may... Read more
Replacement humidity control slide for refrigerator crisper drawers. Installs in produce compartment to adjust moisture levels. Needed when original is broken, cracked, or missing.
Just replaced the part (snap it in...abc....123...no problem) Read more