Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Front mounting grommet for refrigerator ice makers. Secures ice maker assembly to freezer wall. Replace if cracked, missing, or worn to restore stability.
Replaced the housing the water filter screws into. Water works fine now. Read more
Bottom hinge that supports the refrigerator door weight and serves as the pivot point. Replace if worn, cracked, or causing door misalignment and sagging.
Replaced the hinges and all parts pertaining to hinges on the refrigerator door. Total cost was approx. $83 and it took 1 hour this morning (Saturday). Now the door is closing tightly. The refrigerator is 10 years old. GE brand. Read more
Drawer won't change temperature modes or respond to settings? This convertible drawer control board restores all four mode selections and temperature control.
Secures the evaporator fan assembly behind the rear freezer panel. Replace if cracked, rusted, or missing to restore proper fan mounting and clearance.
The problem was most likely the evaporator fan motor but it could have been a bad blade, loose parts or bad motor mounts. Hard to tell without taking everything apart and inspecting. Since fridge was 17 years old I decided to order the entire evaporator fan assembly as shown in the parts diagram including fan blade, motor brackets, motor, motor mounts, screws, etc. Getting to the assembly involved removing the ice maker unit plus the entire rear inside of the freezer section. Parts cost around... Read more
Replaces the sliding rail that allows refrigerator shelves to glide smoothly in and out. Needed when rails are cracked, broken, or no longer slide properly.
I ordered a plain sliding shelf. Read more
The R134 Drier is an OEM part for GE refrigerators. This component plays a critical role in the refrigeration system by removing moisture and contaminants from the refrigerant, ensuring efficient cooling and preventing damage to other parts of the system. It helps maintain the purity and effectiveness of the refrigerant as it cycles through the system.
You should replace the R134 drier if it becomes clogged or damaged. Common causes of a bad drier include wear and tear over time, exposure to moisture, or contamination from other failing components in the refrigeration system.
Symptoms of a bad R134 drier include:
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Secures the condenser fan motor in position. Replace this bracket if cracked, bent, or causing excessive vibration to restore stable mounting.
Replace your worn or broken refrigerator bottom hinge pin. Supports the door and serves as the lower pivot point on the bottom hinge assembly.
Drawer roller assembly guides refrigerator baskets smoothly along tracks. Replace when drawers stick, scrape, or sit unevenly. Confirm fit with your model.
Bought a replacement gear/wheel for the metal bar. Some of the teeth had broke on the old one. Read more
Replacement mounting screw for refrigerator panels, brackets, and hardware. Restores secure fit when original is missing, stripped, or corroded.
Hinge missing screws. Replaced 2. Perfect now Read more
If your dispenser light stays off or won't turn on, this control board restores proper illumination. Moderate DIY, requires clip release and wiring.
Chatted online with a an individual from Appliance Parts Pros regarding replacement bulbs and instructions for our GE Profile PSHW6YGXCDSS Side-By-Side Refrigerator and our GE Advantium SCA2001 Cooking Tool. He gave me the part numbers for the bulbs and they were ordered and delivered very quickly. The bulbs for the the Advantium (WB36X10328 ) were easy to replace using just a screwdriver to remove and replace the protective covers under the appliance. However, the bulbs for the ... Read more
Fastens refrigerator panels, brackets, and internal components. Replace this screw if the original is missing, stripped, or damaged to restore secure mounting.
Quickly on the face grille. Dismantled ice tray and inserted auger. Everything is pretty obvious for dismantling except the spring in the rod on the bottom (pay attention to how it is attached to the rod) and the plastic screw on the front of the auger (use pliers to grip it and it is reverse thread). Read more
Replacement shelf support bracket for refrigerator interior. Installs at shelf edge to restore level positioning. Needed when original is broken, cracked, or missing.
I removed all of the interior components in the refrigerator compartment for a good cleaning and to make sure no other issues. Originally, all of the parts manuals showed that I had to purchase the entire plastic housing, foam insert and fan (WR17X12490). Searching the web, I found a few others who had the same problem and had actually found that you could order just the evaporator fan (WR60X10184). I also ordered several of the plastic shelf support pegs that had broken over time. The... Read more
Seals the freezer drawer to maintain cold temperatures and reduce frost buildup. Replace when worn, cracked, or loose to restore proper sealing. Confirm fit.
Includes 12 retainer rings.
I ordered a replacement auger from AppliancePartsPros.com. Upon receipt of the new auger, I watched the repair video and took the ice crusher apart. I found several other parts that needed to be replaced as well. Once All the parts were received, I again watched the video. The video was not specific enough to show how to reassemble the ice crusher blades and the two types of washers. I found another video on YouTube that walked me through specific details of assembly and everything went... Read more
The Water Valve is an OEM replacement part for GE refrigerators. It controls the flow of water to the ice maker and dispenser. Potential causes of failure in this water valve might include sediment buildup, mineral deposits, or wear and tear over time due to regular usage.
Symptoms of a defective water valve include:
Replacing this part restores the proper flow of water, enabling the ice maker and water dispenser to provide a convenient and efficient supply of ice and water. This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.