Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
The Door Switch is an OEM replacement part for Frigidaire wall ovens. It is a component located on the oven door that detects when the door is opened and closed. The door switch works alongside the control board to regulate oven operations based on door position.
Symptoms of a bad door switch can include:
Causes relate to normal wear over extended use as the door switch mechanism cycles with frequent door openings and closings. Moisture exposure or impacts could also degrade switch performance.
This OEM Frigidaire switch is compatible with Amana, Jenn-Air, KitchenAid, and some Electrolux wall oven models as well.
I diagnosed this problem via the web and the advice was spot on. The problem was a failure of the bottom door switch. I used a multimeter to verify that the switched never closed properly. It took me a minute to figure out how to remove the old switch (press a release tab under the switch while simultaneously rotating counter-clockwise). That was about the most difficult part of the repair. Read more
Oven won't heat or can't hold temperature? This thermal switch monitors oven temperature and protects internal components. Common fix for heat issues.
After 2 repair men, many parts replace it still didn't work, Did research on line and found out the thermal fuse would need to be replace.. Read more
Fix an oven that won't heat or bake element not working. This relay control board receives signals from the main control board. DIY repair under 1 hour.
Andrew helped me trouble shoot the problem. First I replaced the elments but that did not fix the problem. When I spoke with Andrew he told me how to test the OHMS on the new and old element and they were both readying 26 OHMS. I then replaced the control panel for the clock and oven controls. This did not fix the problem. The next step was to replace the relay boards. We placed numbers on the wires (~30) to avoid confusion. Taking notes also helped. Replacing both relay swithces took... Read more
Has three terminals.
When trouble shooting the problem I found that the light switch housing outer lip was broken allowing the switch to push through mounting surface behind the oven door. This is a slide in range so, I proceeded to pull the range away from the counter where I could unplug the power cord. Once the power was off like located the panel on the right upper side of the unit and removed the screws to allow access to the switch. I then unplugged the switch from the wiring harness and removed the damaged... Read more
Convection fan not working or oven heating unevenly? This motor kit drives the fan to circulate hot air for consistent baking. Moderate DIY repair.
Everything was straight forward and easy to repair, I had an appliance tech come out and troubleshoot the repair and watched what he did and asked questions. I then ordered the parts from here and did the repairs myself and saved on having the tech make another trip out. Read more
This control-panel switch restores reliable on/off control of a selected function on your range or wall oven. Replacing a worn or intermittent switch helps ensure the appliance responds consistently when you toggle that function.
I ordered a part to replace the oven door light switch. I got the oven apart easy enough, but when I was ready to install the part, I found the replacement part only had 2 tabs and not the 4 tabs the original one had. I called AppliancePartsPros.com and spoke to a customer service rep who was able to assist. He determined that the replacement part was defective and said he'd ship out another one. While I wasn't enthusiastic about having to assemble and reassemble the oven,... Read more
Secures panels, brackets, and handles in refrigerators and other appliances. Replace missing or stripped screws to restore secure mounting.
Ordered the screws needed from your website and put the doors back on the frig. Read more
Fixes oven that won't heat properly, takes too long to reach temperature, or shuts off unexpectedly. Controls heating elements. Moderate difficulty repair.
I have a Frigidaire Professional double wall oven with run-away heat in the top oven. Checked the probes as the first step in diagnostics, they ohmed out OK. Did some research on several web sites, the issue seemed to center around the Controller being bad. I checked a few appliance web sites and Appliance Parts Pros (APP) was the only one who had the controller in stock and they had the best price by a few dollars. I did the online chat with APP and their conclusion matched my research; the... Read more
Seals oven door to prevent heat loss and improve efficiency. Replace if frayed, damaged, or door doesn't close properly. Verify fit with your model number.
This is a simple fix the old one just pulls out and the new one just goes in its place. no real skill needed here. Read more
Oven door gasket creates a tight seal to maintain temperature. Replace if torn, flattened, or crispy. Clips into door frame. Confirm fit by model number.
Bought two new racks - beautiful! Bought replacement door seal: watched simple video and installed new seal in less than 10 minutes. Extremely pleased and impressed with entire experience as a first-time customer. Read more
This is a nut that is used in many microwave ovens. It is typically used to hold interior fan in place. A nut is a fastener that is used to hold two items together or keep one component secure against a surface. Use and time can cause the nut to become stripped, damaged, or broken. If the nut is broken, it will no longer hold the fan in the right location. The nut will need to be replaced.Before replacing this part, the microwave should be unplugged. Open the refrigerator door and remove the cover that goes over the fan. The nut can then be removed using a nut driver. Replace the other parts before using the appliance.This nut is used in microwave ovens manufactured by Crosley, Electrolux, Frigidaire, and Kenmore. It is sold as a single part. This is an authentic OEM replacement part is sourced directly from the manufacturer.
Replacement spring for microwave door latch mechanism. Restores return tension so the latch engages and releases correctly. Needed when spring is broken or worn.
With parts from you my son repaired the door and now microwave is operating perfect.,.... A 10 minute job for him!... Thanks for not having to buy a new one!!!!! Read more
Fix noisy convection fan operation with this motor replacement. Restores quiet, even heating in your oven. Moderate DIY repair in 30-60 minutes.
I replaced it with an new motor-convection from AplliancePartsPros.com. One note of advice: the fan blade unit inside the oven is held on by being tightened counter clockwise and obviously loosened by turning the nut clockwise (lefty loosey/righty tighty does not apply here). Read more
Fix F95 error codes or doors that won't lock with this oven door latch motor. Restores self-cleaning function. Moderate difficulty, 30-45 minute repair.
I ordered while they were still available, my built-in oven is expensive to replace and I love it. Read more
Bake element restores oven heat by producing the radiant heat needed for baking and roasting. Replacing a worn or damaged bake element helps the oven reach and maintain set temperatures for more consistent cooking results. What it does:
This is a relay control board designed for dual oven configurations. It manages the electrical signals that switch heating elements and other oven components on and off during cooking cycles. Replace this board if one or both ovens fail to heat, heat intermittently, or if error codes related to relay failures appear on the control display.
I noticed my oven would suddenly stop heating during cooking, but the over lights and temp gauge would all appear to be working properly. You could bump the circuit board and it would resume heating, but eventually would stop heating again, which told me I had a short or a break in the solder on my circuit board. Easy fix to replace board, simply took a picture with my ipad, of the old board and wire locations, killed the power, removed old board, installed new board, every wire harness was... Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.