Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Torsion spring that returns the dispenser ice chute door to closed position. Replace if broken, weak, or missing to restore proper door closure.
I wasn't sure if it was the door being warped, the spring return being worn, or the rotary damper failing, so I ordered all to update the door mechanism. I also ordered a new micro switch since one of the switches had started to require more and more pressure to actuate. Figured I'd fix it at the same time. Repair was very straightforward and the videos available on this and other repair sites were very helpful. I found a video that showed replacing the door mechanism on a nearly identical... Read more
Refrigerator side freezing food or running constantly? The fresh food temperature control regulates compartment temps. Moderate DIY repair with video.
This issue was with a refrigerator that we acquired with a house we bought. The freezer was cold, making ice well, overall doing great. The refrigerator was not cold however. I had this issue with our own refrigerator in the past, and it was related to the defrost fan not working and the coils freezing up. However this refrigerator's coils had no ice buildup. Doing some searching on the internet I was able to narrow it down to the damper between the freezer and refrigerator not opening... Read more
Freezer not cooling below 32°F or water leaking under freezer? The drier filter removes moisture from the refrigerant system. Soldering required.
Had a friend who is an appliance repair tech. Replace the evaporator, the heater coil, and the filter/drier. Parts were soldered together and the compressor was put under vacuum. Then, charged with 5 oz. of refrigerant. The freezer works great now! Read more
Freezer clicking but not cooling? The compressor start relay initiates the compressor motor. Common DIY repair when unit runs briefly then shuts off.
I had a friend and a repair guy tell me it was the start relay that needed to be replaced, which was an easy fix. My friend said just to unplug the start relay, replace it with the new one, and it should be good. I've never tried to repair a fridge, and that was the easiest repair ever. Saved us hundreds of dollars! Read more
Ice won't dispense or only comes out crushed? Your ice bin and auger assembly may be broken. This stores ice and drives it out for dispensing. 5-min fix.
Replaced Ice Container and Auger Assembly. Read more
Fix a fridge that's too warm or freezing food with this damper control. Regulates cold air flow from freezer to fridge. DIY repair with video guide.
Replaced the damper control after looking at the exploded drawings privided by this website and determing that the bad part was the damper control. I have never done a repair on an appliance before but this website made it seem doable. Read more
Secures the evaporator fan motor to its bracket for proper airflow. Replace if broken or missing to eliminate vibration, noise, or cooling issues.
Walk into the kitchen on 21 Sep. Eight year old Frigidaire refrigerator appears to be short cycling, controls are nonfunctional. Unplug it for a few minutes, plug it back in, appears to return to normal function. Return to kitchen half hour 45 minutes later it's short cycling again. Panel has codes on it (S or 5 E CE, later that changes to S or 5 Y CE). Research of codes says replace main board and control board. Not sure where this main board is. 22 Sep call appliance repair. "Soonest... Read more
Ice not dispensing or auger won't turn? The drive bar transfers motor rotation to crush and dispense ice. Moderate DIY repair with video guide.
My problem started with a rusting condition in the ice bin that spiraled out of hand. I took apart the ice bin and all the hardware thinking I could clean it with the suggested baking powder. Plastic parts cleaned up like new, metal parts were pitted. I wire brushed and sanded the parts put it all back together and gave it a try. All appeared fine then two days later the ice dispenser stopped. I watched a couple of videos and most pointed to the ice auger motor. One video specifically said you... Read more
Fix a refrigerator that won't defrost or freezes everything with a new defrost control board. Common DIY repair when ice builds up on freezer walls.
I looked on line and found out what might be wrong and then ordered the part from Parts-Pro. They showed us how to install the part. We installed the part and it works as good as new. We have ordered replacement parts from this company many times. We've always had good service from them. I would highly recommend them for all your needs. Read more
Fix a refrigerator light that won't turn on or off when the door opens or closes. This door-activated light switch is a simple 5-minute DIY repair.
Refrigerator light won't turn on or flickers? A faulty light socket is often the cause. This snap-in replacement restores interior lighting in 10 minutes.
I found your website, watched the video on how to fix it and ordered the part. Really a simple fix. Did I mention the super Fast shipping. Amazing! Thanks Read more
Fastens the auger shaft in your refrigerator's ice maker assembly. Replace if cracked, broken, or missing to secure the auger and prevent rubbing.
Replaced "Ice Crusher Housing" and "Fixed Blades Spacer, both of which had broke. Read more
Fix refrigerator lights that won't turn on when door opens. This door light switch is a simple snap-in replacement. Easy 10-minute DIY repair.
I replaced the switch with a new one (exact match) from Appliance Parts Pros. Read more
Nylon washer for the evaporator fan motor shaft in refrigerators. Replace if worn, cracked, or missing to ensure proper fan alignment and operation.
Replacement deli drawer for your refrigerator's fresh food section. Restores organized storage for meats and cheeses when original is cracked or broken.
We ordered replacement drawers. Read more
Limits how far the refrigerator door swings open. Replace this stop if it's worn, broken, or missing to protect the hinge and prevent door overextension.
The plastic bearing broke after 7 years of too much opening and closing. Removing original bears were not real easy, however installing new ones were quick. It works well. The parts arrived really quickly. Read more