Psb2151gr Parts

This clamp secures flexible hoses to fittings to maintain a tight seal and prevent leaks. Use it to replace a worn or loose clamp to stop water or air seepage and restore proper hose attachment. What it does:

• Holds a washer, dryer, or appliance hose firmly to a barb or fitting to prevent slipping
• Helps maintain a watertight or airtight connection to reduce leaks and drips
• Replaces corroded, cracked, or stretched clamps that no longer grip reliably
• Supports normal appliance operation by keeping fluid/air flow contained

• One clamp

• Inspect the hose and fitting; replace the hose if damaged before installing the clamp
• Position clamp over the hose barb and tighten evenly; avoid over-tightening that can cut the hose
• Disconnect power and water supply before servicing any appliance components

Size: 8-32 x .312 inch.

This door closer with cup mounts on the hinge to control the door's final closing motion. It restores smooth, consistent closing and helps the gasket seal evenly to maintain proper temperatures.

• Provides hinge cam action that pulls the door closed during the last few inches
• Helps keep the door aligned so the gasket seals evenly around the cabinet
• Reduces slamming and prevents the door from drifting or popping back open
• Common symptoms of wear: clicking/grinding at the hinge, sagging or rubbing, poor self-closing, or moisture/frost near the door

• Unplug the refrigerator and remove items from the door to reduce weight
• Support the door; remove hinge cover and fasteners, then lift the door off to access the closer components
• Match the original orientation; install the new closer and cup on the hinge/door seats
• Reinstall and align the door; tighten hinge screws and verify smooth self-closing and gasket contact

This seal strip replaces a worn or damaged door gasket edge to restore a proper seal and help the appliance maintain temperature and operate quietly. It's a direct-fit service part used where a continuous seal is required. What it does:

• Provides a flexible barrier along the door/frame to reduce air leaks and heat/cold loss
• Helps prevent moisture buildup and improves energy efficiency when sealing is restored
• Reduces rattling and vibration caused by a compressed or torn seal edge
• Commonly replaced when the strip is torn, missing, or no longer adheres properly

• One seal strip

• Disconnect power to the appliance before servicing to avoid electrical or burn hazards
• Clean and dry the mounting surface; remove old adhesive or residue for best adhesion
• Align the strip carefully and press firmly; allow any adhesive to cure per manufacturer instructions

This cover assembly for the air return guides airflow and protects the return opening from debris so the appliance runs more reliably. It restores correct air pathing and helps maintain normal drying/cooling performance. What it does:

• Directs and protects the air return opening to maintain proper airflow
• Helps prevent lint, dust, and debris from entering sensitive internal components
• Can reduce abnormal noise caused by loose or missing return covers
• Restores designed airflow behavior that supports efficient operation

• Disconnect power to the appliance before starting any work
• Remove exterior panels as needed to access the air return and retain fasteners for reassembly
• Inspect surrounding seals and ducts; replace damaged parts to ensure proper airflow

This is a replacement hex nut used to secure appliance components and fasteners. It restores a tight, reliable connection where a worn or missing nut causes loose panels, trim, or bracketing. What it does:

• Secures threaded studs, bolts, or fasteners to keep panels and components in place
• Restores proper fastening when original nut is stripped, corroded, or lost
• Helps eliminate rattling, vibration, or loose parts caused by a missing/failed nut
• Compatible with the appliance locations that use a standard hex nut for mounting

• Turn off and unplug the appliance before accessing interior panels or fasteners
• Use the correct wrench or socket size to avoid rounding the nut
• Replace only like-for-like nuts; if thread damage is present, inspect and replace the mating bolt/stud as needed

This ball sleeve guides and supports the valve ball inside the water/dispensing assembly to help maintain a proper seal and smooth movement. Replacing a worn sleeve restores reliable valve operation and reduces intermittent leaks or flow issues. What it does:

• Positions and protects the valve ball for consistent seating and sealing
• Prevents wear between the ball and valve bore to maintain proper flow control
• Helps stop dripping, leaking, or inconsistent dispensing caused by a damaged sleeve
• Works as the mating surface for the ball to ensure smooth operation

• One ball sleeve

• Disconnect power and water supply before starting any repair
• Replace only with the correct part number to ensure proper fit and seal
• Inspect surrounding valve components and seals; replace if worn or damaged
• Test for leaks and proper operation after reassembly

A small replacement screw used to secure appliance panels and components so assemblies stay aligned and stable during normal use. Simple, direct fix for loose trim, panels, or mounting points. What it does:

• Secures panels, brackets, or small components to prevent rattling and movement
• Restores proper alignment where a missing or damaged fastener causes gaps
• Helps stop vibration-related noise from loose parts
• Functions as the original-style fastener matching OEM fit and purpose

• Disconnect power and water to the appliance before servicing where applicable
• Use the correct screwdriver or bit to avoid stripping the head
• Thread the screw in by hand to start, then tighten snugly—do not over-torque
• Keep removed hardware organized and compare sizes before installing

A replacement door gasket that restores a tight seal around the oven door to help maintain proper cooking temperature and improve efficiency. Fits Whirlpool ovens and ranges that use part A3189394. What it does

• Seals the oven cavity to reduce heat loss and help maintain consistent cooking temperatures.
• Helps prevent heat from escaping around the door, improving energy use and cook results.
• Worn, torn, or flattened gaskets can cause uneven baking or longer cook times.
• Replacing a damaged gasket can reduce hot spots on the exterior and nearby cabinetry.

• Disconnect power and ensure the oven is completely cool before starting.
• Remove the old gasket by pulling it out of the door channel; clean the channel before installing the new gasket.
• Press the new gasket into the channel around the full perimeter, working from one corner and ensuring an even fit.

This replacement bracket secures the refrigerator ice maker assembly so it stays properly positioned for reliable ice production. It restores stable mounting and helps prevent the ice maker from shifting or coming loose. What it does:

• Holds the ice maker assembly in place on the freezer liner or mounting frame
• Keeps the ice maker aligned for proper operation and water fill
• Helps stop vibration or movement that can cause noisy operation or misfeeds
• Useful when the original bracket is bent, broken, or missing

• Disconnect power to the refrigerator and shut off the water supply before starting
• Remove the ice maker to access the bracket mounting screws
• Reuse existing screws if undamaged; tighten to secure but avoid overtightening
• If mounting points or surrounding plastic are damaged, replace or repair before reinstalling

This lower extension handle replaces a cracked, loose or missing lower door handle section so the appliance door has a secure, finished grip. It restores proper handle alignment and appearance on compatible Whirlpool doors. What it does:

• Replaces the lower section of a split or two-piece door handle assembly
• Provides a secure gripping surface when the original is damaged or broken
• Helps stop loose, wobbly handle feel caused by worn or cracked extensions
• Restores the finished exterior look where the lower handle was chipped or missing

• Designed to attach to the existing upper handle section; keep all original fasteners unless replacement fasteners are specified
• Basic hand tools typically required; follow OEM instructions for removing the door trim or handle covers if needed
• Disconnect power to the appliance (unplug or shut off breaker) before working near electrical components or light assemblies
• Do not force or overtighten fasteners; inspect fit before final tightening to avoid cracking the plastic