Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Bushing that lines the upper hinge pin on refrigerator doors. Replace if cracked, worn, or missing to restore smooth door swing and proper alignment.
Replaced upper and lower thimble's, lever arm, cam closure. Door stop was not the problem, but ordered it and replaced it too. The door of course has to come off, remove the top hinge, and lift it away. Lubricated moving parts with silicone spray. Be sure and put the door back in the open position, so the lever arm and cam closure can properly interact, then close the door. Remove the plastic grate at the bottom to get at the lever arm. Presto. Problem gone. Don't put excessive weight... Read more
Replace your refrigerator's dispenser drip tray if cracked, stained, or missing. Catches water and ice drips in the dispenser recess for a clean look.
Checked both door gaskets and tried to heat them back into shape but it did not work so I ordered the gasket replacements. they arrived two days later one was right the freezer door came in the wrong color but I used it anyways. It had a small tear in it which I repaired using super glue. Laid both gaskets out in the garage as they were warped pretty good. After 48 hours I peeled off the old gasket and cleaned the ridges out real good and let dry. Tackled the freezer door first starting at the... Read more
Replacement slide-out shelf for refrigerator interior storage. Installs in main compartment. Replace if cracked, broken, or warped. Slides for access.
It was very easy we slid out the old shelf and slid the new shelf in. Read more
This armature kit is the moving plunger and linkage operated by the dispenser solenoid. It opens and closes the ice chute door during dispensing and helps it seal when idle to reduce frost and warm-air leaks.
Replaced the water supply valve...boom! Read more
Mounts on the refrigerator hinge to limit door swing and prevent damage. Replace if the stop is broken, cracked, or the tab has sheared off.
There's what needed to be done and there was what was done. Either way it starts with the door stop bracket shearing off and needing to be replaced. Actual work wise. 1) Remove the shelves 2) Remove the 5/16th hex heads at the top 3) Lift the door up and lay it down 4) torx to get the bracket off and the new one on 5) Reverse process Time it should have taken: 30 minutes What actually happened: Watched the video for the wrong model. Curse and be stubborn while trying to figure out how to get... Read more
Replaces the damaged or missing edge trim on your freezer shelf. Snaps onto the shelf frame to provide a finished lip and restore its original appearance.
Replaced with new parts. Read more
The recess door retainer secures the dispenser's ice chute flapper in the refrigerator door. Replacing a cracked or missing retainer restores proper flapper pivot and sealing to help reduce frost buildup and air leaks around the dispenser.
I replaced the solenoid, door, spring and bucket. The bucket cracked from ice freezing inside it. Ice froze inside the bucket because the solenoid stopped pulling the door closed which allowed hot humid air into the freezer. While I was in there I replaced the dispenser door, spring and crank because they are cheap and the old ones were moldy. The mold is most likely from the door not closing and causing condensation on the parts as well. Read more
Refrigerator not cooling or compressor clicking on and off? This compressor kit restores cooling. Requires certified technician with specialty tools.
Protects the freezer light bulb from damage while maintaining visibility. Replace if cracked, yellowed, or broken. Confirm fit with your model number.
Replace solenoid, flapper door and recess spring. Really only needed solenoid, but other parts were so inexpensive and I knew I would already be in there. Read more
Plastic water line that runs from the water valve to the icemaker fill tube. Replace if cracked, brittle, broken, or leaking at connection points.
Thanks to the AppliancePartsPro, I ordered it online and received it quickly. I even used the step by step directions on how to replace the tube from the AppliancePartsPro website. Just be very careful and review the instructions first. Couple of important things: 1. Take a picture of the existing wiring and tubes before you take them apart. 2. *if* you remove the wires ( red and white plugs) from the valve, make sure you plug them back in correctly. 3. Do not pull or push the tubes hard. Use... Read more
Ice won't dispense or drive spins freely? This auger drive coupler connects the motor to the ice bucket. Moderately difficult repair with basic tools.
The auger in ice bucket was frozen and locked in place (some how liquid water must have spilled inside and froze the shaft and bushing). When the motor was activated to deliver ice, the jam caused the motor shaft to strip the threads. With the threads stripped, there is no way (that I could find) to get the drive auger off of the shaft (btw, it is left-hand threaded). Apparently the Drive Auger is made of stainless steel - a harder metal then the motor shaft. To repair it, I removed the... Read more
Replace cracked or broken ice bucket guide slides in your refrigerator freezer. Mounts to freezer wall to support and guide the ice bucket assembly.
Ordered right hand bucket glide and complete ice bucket assembly (cost more than just the cover, but did so in case other ice bucket assembly parts were worn out). Replacing bucket glide was done relatively easily by first turning off the icemaker, removing the old ice bucket assembly from the glides, removing all screws on the right hand glide, and loosening the screws on the left hand glide. This allowed the drive motor assembly (which fits in slots at the back of each glide) to move enough... Read more
Fixed-position freezer shelf for side-by-side refrigerators. Replace cracked, broken, or missing shelves to restore storage capacity and organization.
White rear motor cover for refrigerator. Shields motor and fan area at back of compartment. Replace if cracked, broken, or missing to protect components.
Pictures on website were great. I ordered the part needed. Very easy to replace. Read more
Refrigerator door dairy compartment for storing butter and small items. Replace this bin if cracked, broken, or missing to restore organized door storage.
The old Ice stripper had broken fingers. I realized that even with the new one I had to shave some of the plastic to allow the rotating arms to clear as they push out the ice. I did this very easily with a box cutter razor blade. the Compartment tray was merely a remove and snap into place. Read more
Replacement mounting screw for refrigerator panels, brackets, door handles, and trim. Needed when original hardware is missing, stripped, or corroded.