Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
The recess door retainer secures the dispenser's ice chute flapper in the refrigerator door. Replacing a cracked or missing retainer restores proper flapper pivot and sealing to help reduce frost buildup and air leaks around the dispenser.
Replaced springs, flapper assembly and ice door retainer as described in videos and it was easy. So far so good..water dispenses. Read more
Plastic water line that runs from the water valve to the icemaker fill tube. Replace if cracked, brittle, broken, or leaking at connection points.
Thanks to the AppliancePartsPro, I ordered it online and received it quickly. I even used the step by step directions on how to replace the tube from the AppliancePartsPro website. Just be very careful and review the instructions first. Couple of important things: 1. Take a picture of the existing wiring and tubes before you take them apart. 2. *if* you remove the wires ( red and white plugs) from the valve, make sure you plug them back in correctly. 3. Do not pull or push the tubes hard. Use... Read more
Fix a light that won't turn on or flickers in your refrigerator. This E12 socket replacement is straightforward with our step-by-step video guide.
When diagnosing the problem, I discovered that the ice door was not properly sealing and that the solenoid had appeared to rust/corrode forcing the door open. I replaced most of the ice dispenser internals (solenoid, crank, door, and spring) following the video. The door will now open when dispensing ice (which it does!), and will oddly stay open for a few seconds once I am finished, but does seal properly and the chute/container no longer frosts over. Read more
Refrigerator not cooling or compressor clicking on and off? This compressor kit restores cooling. Requires certified technician with specialty tools.
Ice won't dispense or drive spins freely? This auger drive coupler connects the motor to the ice bucket. Moderately difficult repair with basic tools.
The auger in ice bucket was frozen and locked in place (some how liquid water must have spilled inside and froze the shaft and bushing). When the motor was activated to deliver ice, the jam caused the motor shaft to strip the threads. With the threads stripped, there is no way (that I could find) to get the drive auger off of the shaft (btw, it is left-hand threaded). Apparently the Drive Auger is made of stainless steel - a harder metal then the motor shaft. To repair it, I removed the... Read more
Seals refrigerator door to maintain temperature and prevent warm air entry. Replace if torn, cracked, or causing frost buildup. Verify fit with your model.
Checked both door gaskets and tried to heat them back into shape but it did not work so I ordered the gasket replacements. they arrived two days later one was right the freezer door came in the wrong color but I used it anyways. It had a small tear in it which I repaired using super glue. Laid both gaskets out in the garage as they were warped pretty good. After 48 hours I peeled off the old gasket and cleaned the ridges out real good and let dry. Tackled the freezer door first starting at the... Read more
Base grille that covers the lower front of your refrigerator. Replaces cracked, broken, or missing grilles to protect components underneath.
Replaced grille Read more
Fix leaking water or a non-working ice maker with this refrigerator water inlet valve. Moderate DIY repair in 30-45 minutes with basic tools.
First, I had to remove the cover plate on the back of the refrigerator. Then I unscrewed the water inlet valve from the rest of the assembly. I then unplugged the electrical contacts by pulling them apart. There are two fittings on the valve. One has a nut on it. That one just needs the nut unscrewed, after which the pex tubing can be pulled out. The other one has a pex connection. This one can be separated by simultaneously pushing in on the fitting neck while pulling the pex tubing out. On... Read more
Right side
Replaced the support bracket for the ice bucket. Replaced the auger motor for the ice dispenser and installed the new coupler for the microwave tray to spin. Everything works great now! Read more
Refrigerator door dairy compartment for storing butter and small items. Replace this bin if cracked, broken, or missing to restore organized door storage.
The old Ice stripper had broken fingers. I realized that even with the new one I had to shave some of the plastic to allow the rotating arms to clear as they push out the ice. I did this very easily with a box cutter razor blade. the Compartment tray was merely a remove and snap into place. Read more
Upper hinge pivot pin for side-by-side refrigerator freezer doors. Replace if bent, worn, or missing to restore proper door alignment and swing.
Fix went well, part fit perfect. Thanks Read more
Replacement top hinge pin for refrigerator doors. Provides the upper pivot point for smooth door swing and proper alignment. Replace if bent or worn.
Replaced the hinges and all parts pertaining to hinges on the refrigerator door. Total cost was approx. $83 and it took 1 hour this morning (Saturday). Now the door is closing tightly. The refrigerator is 10 years old. GE brand. Read more
Restores closing tension for refrigerator ice dispenser recess door. Replace if spring is weak, broken, or missing to keep door closing properly.
I used the video posted on site...note on my model trim bezel did not have to be removed! Read more
Replacement mounting screw for refrigerator panels, brackets, door handles, and trim. Needed when original hardware is missing, stripped, or corroded.
Black plastic funnel extension attaches to the front of your refrigerator's ice dispenser. Replace if cracked, broken, or missing to reduce splashing.
Replaced both the Dispenser Lever and Funnel. I probably wouldn't have attempted this had it not been for the how to videos on your website. The video clearly showed how and how simple it was. The video could be improved even more by addressing how to position the micro-switch that activates the ice maker. Read more
Ice maker not filling or water dispenser leaking? This water inlet valve controls flow to your ice maker and dispenser. Most DIYers complete in 15-30 minutes.
I researched the problem online and determined it was undoubtedly the water valve leaking. A visit to AppliancePartsPros.com to order the replacement valve and I was ready to go. Actual repair only took 15 minutes. Read more