Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
This oven door hinge is used on the black and designer white models. Two are used per oven.
So after receiving my 2 door hinges, 2 days before est. delivery . All I had to do is take the oven door off, and then remove 4 screws to take the door apart, 4more screws to remove old hinges, replace w/new reassemble and put door back on oven, all in about 40 min. works like new again, Thanks for everything. Read more
Left side hinge receiver for door hinge. For right side hinge receiver use WP4455606.
I was able to order new hinge receiver brackets for the door. The repair was not that bad. I just had to take off the lower door, take the two trim pieces off the sides and unscrew the screws holding the oven into the face of the cabinet. Then slide it out about halfway and put a step stool under the front to keep it from tipping over. Then it was just a matter of taking off everything around the sides until I could take the brackets off, put the new brackets on, and put everything back... Read more
Right side hinge receiver for door hinge. For left side hinge receiver use WP4455605.
This ground screw secures the appliance's grounding wire or strap to the chassis or terminal area, creating a reliable bonding point. Replace a missing or damaged screw to restore a proper ground connection during installation or service.
Replaced glass and missing screws. Hardest part was removing the old glass because of the double sided tape. Read more
Kit includes 4 pins.
I have a 10 year old Kitchenaid double oven with warming drawer below and electrical connection is located in cabinet below. I order a service manual from http://www.allrepairmanuals.com. If you have the service manual follow it, it walks a technician thru each step. If you don't have a manual here are a few highlights. Disclaimer the following is for my oven model KEBS208DBL8, your oven service steps may vary. IMPORTANT! First step turn-off the power to the oven (mine was a 40 amp breaker)... Read more
This factory fastener secures appliance panels, brackets, and internal components so everything stays aligned and quiet. Replacing a missing or damaged screw restores a tight fit and helps reduce vibration, rattles, and wear.
The plastic piece on the handle where the screw goes in to hold glass door up had broke. I ordered new handle, the retainer pieces that go over the plastic pieces to lock it all in and screws that were suggested. The screws were the wrong ones. They were way too small. I already had one screw and thankfully only had to buy 1 new one because the screw was $40 and shipping’s $10 for it AND it’s on back order right now. The old retainer ring that goes over plastic piece was a nightmare to remove... Read more
This oven door gasket creates a tight, heat-resistant seal between the door and the oven frame. It keeps hot air inside, helps the oven reach and hold temperature, and protects nearby surfaces from escaping heat. What it does
So, I decided that from the number of screws needed to remove the worn parts and the " plug and play" appearance of the new parts on you website, I decided I could do this! This also how I approach my plumbing projects.....this really scares my husband! Well, everything came in at once so a few days later I decided it was time to do the deed. I had pre-spritzed the existing screws the night before with a degreaser and scrubbed with a used toothbrush. The screws all loosened up with no problem.... Read more
This is the large surface heating unit for an electric range or cooktop. Replacing a failing unit restores consistent stovetop heat so cookware warms predictably and meals cook evenly.
Originally, we had mistakenly provided the wrong model number for our Frigidaire cooktop so the wrong part was sent to us. It didn't fit properly so we investigated the problem with one of the customer service reps at Appliance Parts Pro and finally resolved the situation. The proper part was purchased, it was sent to us and we were happy to discover that it fit perfectly, as did the drip pans we ordered. Problem solved! Thanks to Garrett C. Read more
This upper SPST thermostat is a single-pole temperature switch that helps control heating by opening the circuit at a set temperature. It restores proper temperature cycling and acts as an over-temperature safety device. What it does:
I was devastated to hear my wife tell me our Whirlpool double oven was dead after she used the self clean mode. After my research, I found this problem to be more common than expected. I kept seeing reference made to Appliance Parts Pros during my research. I went to the website and found the parts I didnt think anyone had. APP was quick, the price was excellent and when I called their staff I found them to be friendly, knowledgeable and thorough! They had my parts to me in no time and I fixed... Read more
This 10-32 terminal block nut fastens wire lugs to the appliance's terminal studs. Replacing a missing, stripped, or corroded nut restores a tight, reliable connection and helps prevent heat damage or intermittent power at the connection.
The oven temperature was low and the heating time excessive. However, the range display showed the requested 400F, even though the oven was really 250F. Because the oven displayed an inaccurate temperature, I ordered an oven sensor, a heating element, and a terminal block. Replacing the heating element fixed the problem. The element I received was the same shape and size, but the supports were not the same. However, I think it must have been a design change after mine was manufactured... Read more
Screw for control panel vent.
Ordered the right screw and screwed it in. Door now properly secured. Read more
This transient suppressor helps protect the appliance's electronic control by absorbing voltage spikes and filtering electrical noise on the power line. Replacing a failed suppressor can restore control stability after power events. What it does:
Size: 10-32 inch.
Replaced it with the video listed..Maytag Atlantis dryer was not heating. Checked all components inside dryer, thermostat, coils, etc. All check out ok ......last thing I checked was the terminal. It was burned out. Quick video on your website was awesome! THANK YOU for the service, and the ease of ordering parts. LOVE THIS SITE! Read more
This transient suppressor protects the appliance's electronic control by absorbing power-line spikes and electrical transients. Replacing a failed suppressor helps restore stable control operation and helps protect sensitive components from surge-related damage.
This thermal fuse is a heat-sensitive safety cutoff that protects dryers from overheating by opening the electrical circuit at high temperature. It replaces a failed fuse to restore safe thermal protection and normal dryer operation. What it does:
Not sure which fuse might be bad, I ordered all three. The oven is almost twenty years old, so I figured it couldn't hurt to replace them all. The breakers marked oven were tripped, so we figured everything was off. Wrong! The 220 and the 120 are separate breakers. We found this out the old fashioned way, we got shocked. Anyway, the fix is pretty simple. Take off decorative trim. Only one screw on each side holds it on. Remove four screws securing oven to cabinet, and slide oven out. Our oven... Read more
Color: Black. Size: 12 oz. Acrylic appliance aerosol can spray paint.
I purchased a can of black appliance spray paint, removed the panels on the dishwasher, sprayed them, and a few hours later put them back. They're beautiful and it looks like I have a brand new dishwasher! It now matches everything and looks great with the new granite counter tops I just installed. THANK YOU FOR THE GREAT IDEA!!! I'm a 76 year old female and my friends think I'm a genius! Read more