Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Ice maker only producing crushed ice or freezing up? The auger motor controls ice dispensing. DIY-friendly repair, typically under 1 hour to install.
Entire Samsung Ice Master is modular. Ordered the "ASSY CASE-FAN AUGER MOTO " part and replaced original...Removed ice basket. Removed Cover-Wire Harness by removing screw and unplugged both the modular icemaker and part mentioned above. Icemaker is removed by sliding forward and down. The "ASSY CASE-FAN AUGER MOTO" part at back of ice compartment is held in by plastic clip on bottom of compartment. No screws to remove...just lift up clip and slide forward. Replace parts in reverse order.... Read more
The Refrigerator Flapper Door Hinge Cover is designed to restore the functionality and appearance of your Samsung refrigerator. This genuine OEM part ensures a precise fit, seamlessly integrating with your applianceGÇÖs door hinge system. Crafted from du
I replaced the spring and door heater cover. The video was a life saver on what was needed and how to also the customer Representative was very knowledgeable and sent a video like with my conformation. Read more
Seals the ice chute to prevent warm air from entering the ice maker compartment. Replace if cracked, moldy, or no longer sealing properly. Confirm fit by model.
New Chute gasket but still need bottom gasket as they appear to both need to change. Read more
Ice not dispensing or weak flow? This dispenser door assembly restores proper ice chute function. Moderate DIY repair with basic tools in 30-45 minutes.
Removed Phillips head screw from bottom side. Next I removed front electronic interface panel, carefully. The plastic clips holding it in place are designed to pop lose on the right side first.then unplug wiring from back of interface panel. Remove two Phillips head screws holding ice/water dispensing unit in place. Carefully remove dispensing unit from leaving multiple wiring plugs connected. Carefully apply pressure to the side of the ice chute door frame to remove the ice chute door/flap.... Read more
Replacement lower door bin assembly for refrigerator door storage. Installs in bottom door section. Needed when original bin is cracked or broken.
Samsung..Replaced shelving in door Read more
The Refrigerator Temperature Sensor Holder is essential for maintaining accurate temperature control in your Samsung refrigerator. This genuine OEM part ensures a secure fit for the temperature sensor, promoting reliable performance and consistent cooling. Designed specifically for Samsung refrigerator models, it integrates seamlessly with your appliance, making installation straightforward and hassle-free. The sturdy construction of the temperature sensor holder guarantees long-lasting durability, protecting your sensor from damage and ensuring it remains in place. By using this genuine OEM part, you can restore the precise temperature regulation of your fridge, preventing issues like improper cooling or temperature fluctuations. This not only helps in keeping your food fresh but also enhances the overall efficiency of your refrigerator. Whether youGÇÖre replacing a worn-out holder or upgrading a damaged component, the Refrigerator Temperature Sensor Holder provides the functionality and reliability you need to keep your Samsung refrigerator operating smoothly.
I replaced the temperature sensor, the thermo fuse, and the heating element that thaws the evaporator on a cycle to keep the evaporator from freezing up. The most time consuming part of the repair was waiting for the fridge to thaw out so that I could remove the cover. I disconnected the fridge the night before and placed a fan on low with the doors open so that it was thawed out when I awoke. It was easy to remove the evaporator cover once I removed all of the shelves. I took pics as i was... Read more
Rubber grommet that secures and cushions the evaporator or condenser fan motor in your refrigerator. Replace if cracked, worn, or missing to stop vibration.
Removed refrigerator panel, disconnected light and fan power. Removed fan assembly and replaced motor, grommets and fan attachment spring. Unit had adhesive on spring to help hold the spring. Chatted with customer service and clarified that spring and fan would easily pull off motor shaft. Adhesive probably was extra measure used during original build of the fridge. Noise was due to fan rubbing on housing. New fan position set to avoid any rubbing. Read more
Self-tapping screw for appliance assembly and repairs. Secures handles, bins, shelves, and components. Replace missing or stripped screws during moves or repairs.
Went online to repairclinic.com and it was a simple as typing in the serial # to find the correct parts. Shipping was very quick and the handle was completely repaired within days. Read more
The Refrigerator Fan Blade Spring is designed to maintain the proper tension and alignment of your refrigerator's fan blades, ensuring efficient airflow and optimal cooling performance. This essential component plays a crucial role in the smooth operatio
The Refrigerator Door Auto-Close Assembly ensures your fridge doors close smoothly and securely every time. This genuine OEM part is specifically designed for Samsung refrigerator models, providing a perfect fit and reliable operation. With the auto-clos
Paid 180 bucks for a damages $3200.00 frig. Doors was crushed from falling off delivery truck. More parts were stolen as it sat in the store. I purchase new door, hinge parts, ice maker and ice cube dispenser and got it all back as good as new for less than 300 bucks ! A big thanks to AppliancePartsPros.com ! Your website was easy to navigate and order just what I needed ! Read more
Protective cover for the ice dispenser chute opening on your refrigerator door. Replace if cracked, broken, or missing to maintain proper function.
Bought new ice bucket and ice chute for door. Read more
Upper door handle support bracket for refrigerators. Replaces broken or cracked handle mounting hardware. Installs on refrigerator door interior.
Replaced Case Water Filter assembly DA81-05883A. Please read my post entirely before starting. I completed all the tasks that I could without having to disconnect the refrigerator since it was full of food. First I removed the panel on top of the refrigerator that covers the water line that feeds the dispenser. Do not disconnect any electrical connections or the water line at this time. Remove the panel from the back bottom of the refrigerator that covers the compressor and water valve,... Read more
Fix a broken water or ice dispenser paddle with this dispenser lever assembly. Restores push-button function when the activation arm snaps or cracks.
First let me start by saying Appliance Parts Pros are the best because they speak English and are in the United States of America. I ordered the same parts from another company however after 10 days the company stated the parts are still in route from overseas. I made contact with Appliance Parts Pros and Sheila P. was a delightful American who understood my situation and we ordered the parts over the phone. Lo and behold the parts arrived within several days and I was able to find a how to... Read more
Ice dispenser only crushing or not dispensing? This solenoid valve controls ice flow and cube selection. DIY-friendly repair with video guide.
Replaced ice dispenser solenoid Read more
The Refrigerator Fixer Shaft Right is an essential component designed to restore the functionality of your Samsung refrigerator. This genuine OEM part ensures a perfect fit and reliable performance, maintaining the smooth operation of your appliance. Cra
Roller assembly that allows refrigerator trays to glide smoothly in and out. Replace if rollers are broken, missing, or drawer won't slide properly.
Bought the pieces from the appliance parts pros.com. Read more