Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
This factory screw secures appliance components to their mounting points. Replace missing, worn, or stripped hardware to restore a tight fit, proper alignment, and quieter operation across the affected assembly.
Ordered Bake Element, Y04100019 (Whirlpool AP4283614) to replace a broken bake element on my 30-year old Jenn-Air Model S125 Downdraft Slide-in electric range. Received the element very quickly but it had been damaged in shipping. Called AppliancePartsPros to report this and they quickly shipped another element - very easy process. To install the element, I turned off the power to the range, put on rubber gloves (just in case) and removed the two sheet metal crews at the rear of the oven -... Read more
Burner not heating evenly or has hot spots? This 6-inch surface element coil restores consistent heat for simmering and boiling. Simple plug-in fix.
Bought replacement burner receptacles. Cut off the old ones, used wire nuts to connect replacements. Read more
Replace your refrigerator's water filter case assembly to restore proper filtration and prevent leaks. Secures filter housing for optimal performance.
Seals your refrigerator door to maintain temperature and prevent energy loss. Replace if torn, cracked, or not sealing properly. Verify fit with your model.
Purchased two new gaskets and replaced them. Hoping upper door will seal better and will pull open a little harder then before.Right now it pulls open very easy and I feel that it should pull harder. The freezer seems to be a lot better with little to no ice forming. I have been looking for information to see if there is something to put on gasket to make the pull on the door a little harder. Any suggestions would be greatly appreciated. ... Read more
Plastic side trim secures oven door glass in place. Replace if cracked, broken, or brittle from heat exposure. Prevents glass flexing and damage.
Primarily, removed oven door. Be cognizant of how you disassembled ... Very important when you reassemble ! By-the-way,this was ALL PRECIPITATED by wanting to clean the interior side of oven door glass after my wife self-cleaned the oven! How in-the-world did grease get there in the first place!? While disassembling door, after removing from body of oven , the right side trim piece (being Very brittle) Broke ! Than, due to the same reason, the left side trim piece Broke ! Yippee ! That will... Read more
The Refrigerator Temperature Sensor Holder is essential for maintaining accurate temperature control in your Samsung refrigerator. This genuine OEM part ensures a secure fit for the temperature sensor, promoting reliable performance and consistent cooling. Designed specifically for Samsung refrigerator models, it integrates seamlessly with your appliance, making installation straightforward and hassle-free. The sturdy construction of the temperature sensor holder guarantees long-lasting durability, protecting your sensor from damage and ensuring it remains in place. By using this genuine OEM part, you can restore the precise temperature regulation of your fridge, preventing issues like improper cooling or temperature fluctuations. This not only helps in keeping your food fresh but also enhances the overall efficiency of your refrigerator. Whether youGÇÖre replacing a worn-out holder or upgrading a damaged component, the Refrigerator Temperature Sensor Holder provides the functionality and reliability you need to keep your Samsung refrigerator operating smoothly.
I replaced the temperature sensor, the thermo fuse, and the heating element that thaws the evaporator on a cycle to keep the evaporator from freezing up. The most time consuming part of the repair was waiting for the fridge to thaw out so that I could remove the cover. I disconnected the fridge the night before and placed a fan on low with the doors open so that it was thawed out when I awoke. It was easy to remove the evaporator cover once I removed all of the shelves. I took pics as i was... Read more
Rubber grommet that secures and cushions the evaporator or condenser fan motor in your refrigerator. Replace if cracked, worn, or missing to stop vibration.
Removed refrigerator panel, disconnected light and fan power. Removed fan assembly and replaced motor, grommets and fan attachment spring. Unit had adhesive on spring to help hold the spring. Chatted with customer service and clarified that spring and fan would easily pull off motor shaft. Adhesive probably was extra measure used during original build of the fridge. Noise was due to fan rubbing on housing. New fan position set to avoid any rubbing. Read more
Broken indicator light lens? This red lens covers the control panel light opening, restoring visibility and protection. Easy DIY fix in under an hour.
Replaced this switch and now the dual burner works perfectly. Saw a broken indicator light when I had the back off and replaced that also. Whole job took under an hour. The shipping was very quick. Read more
The Refrigerator Thermal Fuse Assembly for Bottom-Mount Models is an essential component for maintaining the optimal performance of your bottom-mount refrigerator. This genuine OEM part ensures reliable operation by protecting your appliance from overheating and potential electrical issues. Specifically designed for compatible Samsung refrigerator models, it guarantees a perfect fit and seamless integration with your existing setup. By replacing a faulty thermal fuse with this high-quality assembly, you can restore your refrigerator's cooling efficiency and prevent unexpected shutdowns. This reliable part not only helps in maintaining consistent temperatures but also prolongs the lifespan of your appliance by safeguarding its critical components. Easy to install, the Refrigerator Thermal Fuse Assembly for Bottom-Mount Models provides peace of mind, knowing that your refrigerator is equipped with a durable and trustworthy safety mechanism. Enhance your refrigerator's reliability and ensure it operates smoothly with this essential genuine OEM thermal fuse assembly.
1. Unplug and let defrost (I had it unplugged for days, not sure if that was necessary). 2. Removed panels inside the back of the fridge (careful not to damage the wires. Also, note that on my model there was a screw behind the long, narrow LED light strip. That strip had to be unplugged and slid down to access the screw. There were also screws in each of the lower light fixtures. 3. Removed temperature sensor on the top of the bottom panel (I used a pliers to open up the white clip that holds... Read more
The Refrigerator Fan Blade Spring is designed to maintain the proper tension and alignment of your refrigerator's fan blades, ensuring efficient airflow and optimal cooling performance. This essential component plays a crucial role in the smooth operation of your Samsung refrigerator, preventing noisy vibrations and maintaining consistent temperature control. Made as a genuine OEM part, it guarantees a perfect fit and reliable performance, matching the quality and standards of your original appliance parts. Compatible with a wide range of Samsung refrigerator models, this fan blade spring is easy to install, allowing you to restore your fridge's functionality without hassle. By replacing a worn or damaged spring with this authentic part, you can enhance the longevity and efficiency of your refrigerator, providing a better cooling experience for your food storage needs. Trust in the Refrigerator Fan Blade Spring to deliver the dependable performance your Samsung refrigerator requires.
The Refrigerator Door Auto-Close Assembly ensures your fridge doors close smoothly and securely every time. This genuine OEM part is specifically designed for Samsung refrigerator models, providing a perfect fit and reliable operation. With the auto-close feature, you can maintain consistent temperature control, enhancing your refrigerator's energy efficiency and reducing electricity costs. The assembly prevents accidental door openings, helping to keep your food fresh and organized. Made from durable materials, this component offers long-lasting performance and withstands daily use. Installation is straightforward, allowing you to easily replace a faulty part and restore your refrigerator's functionality without hassle. By choosing the Refrigerator Door Auto-Close Assembly , you ensure your Samsung appliance operates optimally, providing peace of mind and a better user experience. Trust in this genuine OEM part to deliver the quality and dependability needed to keep your refrigerator running smoothly for years to come.
Paid 180 bucks for a damages $3200.00 frig. Doors was crushed from falling off delivery truck. More parts were stolen as it sat in the store. I purchase new door, hinge parts, ice maker and ice cube dispenser and got it all back as good as new for less than 300 bucks ! A big thanks to AppliancePartsPros.com ! Your website was easy to navigate and order just what I needed ! Read more
Burner not heating or heating intermittently? This surface element wire harness connects switches to heating elements. DIY repair takes about 30 minutes.
Order the correct harness from AppliancePartsPro.com and watch the video which was very helpful. Simple repair took only about 30 minutes. definitely saved myself a service call. Read more
Plastic side trim panel for range oven doors. Secures between top cover and bottom screw mount. Replace when cracked, broken, or brittle from age.
White burner control knob for electric ranges. Replace if your stovetop knob is cracked, broken, worn, loose, or missing. Installs on the control panel.
Determined that the LF infinite control switch contacts for the burner indicator light were stuck closed. I replaced the control as well as the knob as the knob felt loose on the control. Read more
This is a Whirlpool range control board. It manages and monitors temperatures for the range and features a digital display and user interface buttons. The control board can short out due to power surge or exposure to excessive heat. For example, if the oven's self clean function is run too long or too frequently, parts of the control board could melt or otherwise malfunction.Before installing this part, be sure to cut power to the appliance and allow it to cool completely. The stove may need to be pulled away from the wall to access the screws holding the control panel in place. Remove the screws from each side of the control panel to gain access to the old control board. Disconnect any wire harnesses connected to it and remove any screws mounting it in place before installing the new part.This is a genuine OEM part compatible with ranges manufactured by Whirlpool brands, including Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and others. This product is just the panel and contains no additional parts or hardware.
After trouble shooting, ordered electronic board from appliance parts pros.com I received it the next day and installed it. works find. Read more
Self-tapping screw for appliance assembly and repairs. Secures handles, bins, shelves, and components. Replace missing or stripped screws during moves or repairs.
Went online to repairclinic.com and it was a simple as typing in the serial # to find the correct parts. Shipping was very quick and the handle was completely repaired within days. Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.