Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Replacement right door bin guard assembly for your refrigerator. Replaces broken, cracked, or missing guards that secure door bins in place. Simple lift-out installation.
I was thoroughly confused by the AppliancePartsPros website - this is not my forte! - but the wonderful customer service rep listened to my vague end-user non-professional descriptions, found the parts in the catalog, and shipped them to me. I very easily installed them all by myself. Read more
The Refrigerator Door Reed Switch is an essential component for maintaining the optimal performance of your refrigerator. This genuine OEM part ensures accurate detection of the doorGÇÖs open and closed states, allowing your appliance to operate efficien
Unplug all the plugs to the main control board and switched to the new control board. Works perfect thank you. These days you have to do stuff yourself. Everything is getting so expensive. AppliancePartsPros customer service was 100% good. Gave me the right parts thank you again and again. Read more
Ice maker only producing crushed ice or freezing up? The auger motor controls ice dispensing. DIY-friendly repair, typically under 1 hour to install.
Entire Samsung Ice Master is modular. Ordered the "ASSY CASE-FAN AUGER MOTO " part and replaced original...Removed ice basket. Removed Cover-Wire Harness by removing screw and unplugged both the modular icemaker and part mentioned above. Icemaker is removed by sliding forward and down. The "ASSY CASE-FAN AUGER MOTO" part at back of ice compartment is held in by plastic clip on bottom of compartment. No screws to remove...just lift up clip and slide forward. Replace parts in reverse order.... Read more
The Refrigerator Mullion Assembly is essential for maintaining the structure and functionality of your Samsung refrigerator. This genuine OEM part ensures a perfect fit, matching the original design for seamless integration. The mullion assembly supports
It took less than 10 minutes to replace the door. There is a video on YouTube also showing the replacement. I used the chat option on the Web site to get the right replacement part number. It was quick and easy too. I was impressed with the quick accurate response Read more
Seals the ice chute to prevent warm air from entering the ice maker compartment. Replace if cracked, moldy, or no longer sealing properly. Confirm fit by model.
New Chute gasket but still need bottom gasket as they appear to both need to change. Read more
Ice not dispensing or weak flow? This dispenser door assembly restores proper ice chute function. Moderate DIY repair with basic tools in 30-45 minutes.
Removed Phillips head screw from bottom side. Next I removed front electronic interface panel, carefully. The plastic clips holding it in place are designed to pop lose on the right side first.then unplug wiring from back of interface panel. Remove two Phillips head screws holding ice/water dispensing unit in place. Carefully remove dispensing unit from leaving multiple wiring plugs connected. Carefully apply pressure to the side of the ice chute door frame to remove the ice chute door/flap.... Read more
The Refrigerator Temperature Sensor Holder is essential for maintaining accurate temperature control in your Samsung refrigerator. This genuine OEM part ensures a secure fit for the temperature sensor, promoting reliable performance and consistent cooling. Designed specifically for Samsung refrigerator models, it integrates seamlessly with your appliance, making installation straightforward and hassle-free. The sturdy construction of the temperature sensor holder guarantees long-lasting durability, protecting your sensor from damage and ensuring it remains in place. By using this genuine OEM part, you can restore the precise temperature regulation of your fridge, preventing issues like improper cooling or temperature fluctuations. This not only helps in keeping your food fresh but also enhances the overall efficiency of your refrigerator. Whether youGÇÖre replacing a worn-out holder or upgrading a damaged component, the Refrigerator Temperature Sensor Holder provides the functionality and reliability you need to keep your Samsung refrigerator operating smoothly.
I replaced the temperature sensor, the thermo fuse, and the heating element that thaws the evaporator on a cycle to keep the evaporator from freezing up. The most time consuming part of the repair was waiting for the fridge to thaw out so that I could remove the cover. I disconnected the fridge the night before and placed a fan on low with the doors open so that it was thawed out when I awoke. It was easy to remove the evaporator cover once I removed all of the shelves. I took pics as i was... Read more
Rubber grommet that secures and cushions the evaporator or condenser fan motor in your refrigerator. Replace if cracked, worn, or missing to stop vibration.
Removed refrigerator panel, disconnected light and fan power. Removed fan assembly and replaced motor, grommets and fan attachment spring. Unit had adhesive on spring to help hold the spring. Chatted with customer service and clarified that spring and fan would easily pull off motor shaft. Adhesive probably was extra measure used during original build of the fridge. Noise was due to fan rubbing on housing. New fan position set to avoid any rubbing. Read more
The Refrigerator Inverter PCB Assembly is essential for maintaining optimal performance in your Samsung refrigerator. This genuine OEM part ensures precise control of the inverter system, enhancing the efficiency and longevity of your appliance. Designed
Replaced inverter part number DA92-00483B (AP5914908). Very easy, 5 minute job. Read more
The Refrigerator Fan Blade Spring is designed to maintain the proper tension and alignment of your refrigerator's fan blades, ensuring efficient airflow and optimal cooling performance. This essential component plays a crucial role in the smooth operatio
Self-tapping screw for appliance assembly and repairs. Secures handles, bins, shelves, and components. Replace missing or stripped screws during moves or repairs.
Went online to repairclinic.com and it was a simple as typing in the serial # to find the correct parts. Shipping was very quick and the handle was completely repaired within days. Read more
Upper door handle support bracket for refrigerators. Replaces broken or cracked handle mounting hardware. Installs on refrigerator door interior.
Replaced Case Water Filter assembly DA81-05883A. Please read my post entirely before starting. I completed all the tasks that I could without having to disconnect the refrigerator since it was full of food. First I removed the panel on top of the refrigerator that covers the water line that feeds the dispenser. Do not disconnect any electrical connections or the water line at this time. Remove the panel from the back bottom of the refrigerator that covers the compressor and water valve,... Read more
The Refrigerator Door Auto-Close Assembly ensures your fridge doors close smoothly and securely every time. This genuine OEM part is specifically designed for Samsung refrigerator models, providing a perfect fit and reliable operation. With the auto-clos
Paid 180 bucks for a damages $3200.00 frig. Doors was crushed from falling off delivery truck. More parts were stolen as it sat in the store. I purchase new door, hinge parts, ice maker and ice cube dispenser and got it all back as good as new for less than 300 bucks ! A big thanks to AppliancePartsPros.com ! Your website was easy to navigate and order just what I needed ! Read more
Protective cover for the ice dispenser chute opening on your refrigerator door. Replace if cracked, broken, or missing to maintain proper function.
Bought new ice bucket and ice chute for door. Read more
Mounting screw for refrigerator door hinges and internal components. Replace if stripped, missing, or damaged during hinge repair or door removal.
Ordered the pieces from here. Downloaded the user manual. I never work on appliances but I couldn't justify the $200 a service tech would have charged to fix a $35 part. Followed the manual and removed the door. Replaced the broken plastic pieces. BE VERY CAREFUL not to strip the screws. I did and that's another story. Very easy to fix. You will need a second person to help guide the door back onto the frame. Read more
The Refrigerator Fixer Shaft Right is an essential component designed to restore the functionality of your Samsung refrigerator. This genuine OEM part ensures a perfect fit and reliable performance, maintaining the smooth operation of your appliance. Cra