Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Mounts to the range frame to anchor the door hinge arm. Replace if cracked, bent, or worn to restore proper door alignment and smooth operation.
I knew for sure that the hinge with the large spring was damaged, but elected to replace both hinges and receivers. Replacing the parts was fairly easy and would have taken me less then an hour. This model has thin metal covers over the hinge assemblies. I found that squeezing in the sides of the covers help to hold them in place on the hinge while reassembling the door. My only difficulty was putting the door back on the oven. It took a little maneuvering but I managed to get it. Now the door... Read more
Replaces the metal trim strip along the bottom edge of your range oven door. Order when original trim is rusted, corroded, broken, bent, or missing.
Took oven door off and replaced part. While I had the door off I removed the front glass and cleaned it and the 1st interior glass window. Read more
Mounting screw for securing trim, hinges, drawer guides, and interior components. Replace if missing, stripped, or broken during repair or maintenance.
The replacement part was identical, arrived quickly as promised, and took only a couple of minutes to install. Excellent service. Very happy with the end result and the whole process. Read more
Replacement oven door handle for ranges. Installs on the front of the oven door. Order when your handle is cracked, broken, or detached. Requires screws.
Overall the fix wasn't too hard. The challenge was putting the oven door back together and holding it together while trying to tighten the screws. Enlisted my wife's help to hold the door and at first the handle screws wouldn't tighten. My cordless screwdriver's battery was under-charged. Once I switched batteries I was able to tighten the screws. Seemed like I needed to push too hard (my wife freaked "not so hard you will strip them!") however pushing hard was what was needed. Both screws... Read more
Replacement 10-32 machine screw for securing panels, brackets, and internal components. Ideal for replacing missing, stripped, or damaged hardware.
Ordered Bake Element, Y04100019 (Whirlpool AP4283614) to replace a broken bake element on my 30-year old Jenn-Air Model S125 Downdraft Slide-in electric range. Received the element very quickly but it had been damaged in shipping. Called AppliancePartsPros to report this and they quickly shipped another element - very easy process. To install the element, I turned off the power to the range, put on rubber gloves (just in case) and removed the two sheet metal crews at the rear of the oven -... Read more
8-18 x 1/2 inch mounting screw for securing drawer glides, brackets, and oven door components. Replace missing, stripped, or damaged screws during repairs.
Whenever the drawer was opened, it would fall of the guide rails. This lead to the drawer being crooked several times. I took the drawer out and noticed one of the glides was missing. Ordered a new pair, popped it on and now the drawer slides properly. Read more
Factory mounting screw secures panels, brackets, and internal components in your range. Replace missing, stripped, or corroded screws to restore stability.
Replaced missing screws. Read more
Replacement mounting screw for securing range panels, brackets, and internal components. Replace missing, stripped, or rusted screws to restore fit.
Front drawer glide for range broiler or storage drawer. Replace when drawer sags, won't slide smoothly, or glide is broken. Confirm fit with your model.
Replaces broken or worn oven door hinges on ranges. Installs inside the door frame to support proper opening and closing. Sold individually.
This oven was a Kenmore model #66595822003. I replaced both spring hinges. This oven was a white oven so it took the MFG# WP8053807 hinge (order two of them). They are the same hinge. No left or right. To get the door off the oven, open the door all the way open, I installed pins (preferably only 1/4" long) in the holes of both hinges. Then remove the spring steel retainers above old hinges in the oven frame. These holds hinges in place. Now close the door until hinge stops on pins. Lift up... Read more
Broken indicator light lens? This red lens covers the control panel light opening, restoring visibility and protection. Easy DIY fix in under an hour.
UNPLUGGED STOVE,REMOVED TOP CONTROL PANEL AND PUT NEW LENS IN. Read more
Plastic side trim secures oven door glass in place. Replace if cracked, broken, or brittle from heat exposure. Prevents glass flexing and damage.
Primarily, removed oven door. Be cognizant of how you disassembled ... Very important when you reassemble ! By-the-way,this was ALL PRECIPITATED by wanting to clean the interior side of oven door glass after my wife self-cleaned the oven! How in-the-world did grease get there in the first place!? While disassembling door, after removing from body of oven , the right side trim piece (being Very brittle) Broke ! Than, due to the same reason, the left side trim piece Broke ! Yippee ! That will... Read more
Plastic side trim panel for range oven doors. Secures between top cover and bottom screw mount. Replace when cracked, broken, or brittle from age.
The hardest part of this repair was a) realizing that the easiest way to clean the oven door pieces is to remove the whole door and b) figuring out how to put the oven door back on. Doing (b) is infinitely easier if you stick two allen wrenches into the holes in the door hinge, but these holes ONLY appear when the door is fully open. Prop the hinges open BEFORE you remove the door. As many posters online will tell you, it is easy to remove the oven door but hard to put it back on. It... Read more
Replacement outer glass panel assembly for range oven doors. Installs on the front exterior of the door. Needed when original glass is cracked or shattered.
We found a video on how to change out the glass and looked fairly easy. My husband, being the skeptic that he is, wasn't on board as readily as I was but we tried it regardless. To his surprise in about 30 minutes we did it! So easy and a big thanks to Appliances Parts Pros for the part. We had the new part in 1 1/2 days...I was expecting it to be delivered in 5 days! This is not the first time doing business with them and I will continue to do so. Great company!! Read more
10-32 machine thread screw secures brackets, panels, and trim inside ranges and washers. Replace missing, stripped, or damaged fasteners to restore alignment.
Supports and guides your range oven door for smooth opening and closing. Replace if your hinge is cracked, broken, or causing door misalignment issues.
The repair went very smooth because all I had to do was watch your video. Good job! Read more