Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Clear plastic crisper drawer that mounts on sliding rails in the fresh food compartment. Replace when cracked, broken, or missing to restore proper storage.
Replaced with new Vegetable Drawer. Read more
Seals door to prevent cold air loss and condensation. Replace if door won't close properly or gasket is torn. Verify fit with your model.
Easy repair. Remove drawer. Take cover off wire connection on back of drawer front. Disconnect wire terminal. Remove 4 bolts holding drawer front to both slide assemblies ( 10 mm socket ) and set aside. Remove small sheet metal screw at top front of both slides. Disconnect wire terminal from wall. Hold both slides and pull straight out. Back of slides are held in by tabs that fit into the wall. Slides easily come apart from connecting rod. Installation is in reverse. 15 minute fix. Be sure to... Read more
Supports and guides French doors for smooth operation. Replace if cracked, broken, or causing door misalignment. Installs on the mullion between doors.
Seals your refrigerator's ice chute to prevent water leaks and melting ice from dripping into your fridge. Replace if ice cubes are wet or water pools below.
I watched your online video. Grabbed a small screwdriver, replaced gasket in under 5 minutes. Read more
Upper door handle support bracket for refrigerators. Replaces broken or cracked handle mounting hardware. Installs on refrigerator door interior.
Replaced Case Water Filter assembly DA81-05883A. Please read my post entirely before starting. I completed all the tasks that I could without having to disconnect the refrigerator since it was full of food. First I removed the panel on top of the refrigerator that covers the water line that feeds the dispenser. Do not disconnect any electrical connections or the water line at this time. Remove the panel from the back bottom of the refrigerator that covers the compressor and water valve,... Read more
Transparent RT-oxime sealant creates flexible, moisture-resistant seals for appliance repairs. Replace when seals leak or crack. Verify compatibility.
End cap that covers the freezer door handle assembly. Replaces a cracked, broken, or missing cap to restore the finished look of your handle.
Replaced spring on French door. And replaced all four (refrigerator drawer and freezer drawer hinges. The customer service people when ordering the parts were extremely helpful. They helped identify the correct parts needed. And the videos of ‘how to’ replace were also very helpful. A very good service experience. Read more
Fixes refrigerator not cooling, freezer not working, or unresponsive display issues. Controls electrical functions and temperature regulation.
Replaced both boards. Read more
The Bottom-Mount Refrigerator Fan Propeller is essential for maintaining optimal airflow in your Samsung bottom-mount refrigerator. This genuine OEM part ensures consistent temperature distribution, helping to keep your food fresh and your appliance running efficiently. Crafted with precision, the fan propeller operates smoothly and quietly, reducing energy consumption and preventing overheating. The Bottom-Mount Refrigerator Fan Propeller is specifically designed to fit a range of Samsung bottom-mount refrigerator models, guaranteeing a secure and seamless installation. Replacing a worn or damaged fan propeller with this high-quality part restores your refrigerator's performance, enhancing its longevity and reliability. Trust in this genuine OEM part to provide the functional benefits you need for a well-performing and dependable refrigerator.
Ordered the two motors plus ordered the fan blades since I was afraid one might break during replacement. Changed out without breaking Freezer and both ice makers now working fine Read more
Fridge light won't turn off or alarm beeping constantly? This door switch detects when the door opens or closes. DIY-friendly repair with video guide.
I thought that I needed to repair the water supply. But it all looked OK. I had turned the power off for a few minutes hoping to clear any false info from the numerous power outages. And with hours of research, I found some info about the door switch on top of the freezer. It suggested placing a magnet above the switch to silence the noise. This did the trick. Shortly after I heard the ice maker filling. I tested the water feed, and it was working. I then ordered a new switch and replaced it.... Read more
Fix water pooling inside your refrigerator with this drain cap assembly. Directs excess water away from the interior. Accessed from back panel.
This assembly includes the ice route case, chute door, and funnel frame that guides ice from the ice maker through the dispenser and into your glass. It controls the path ice follows when dispensed and helps prevent cold air from leaking back into the freezer. Replace this assembly if ice is jamming in the chute, the dispenser door isn't sealing properly, or ice is not dispensing smoothly.
Fix temperature fluctuations, defrost issues, or error codes with a new main control board. Controls cooling, defrost cycles, and display functions.
Replaced the main control board. Read more
Support bracket that secures the freezer door handle to your refrigerator. Replace if broken, cracked, or damaged during handle removal or impact.
Ordered parts to reattach the handle online. I ordered an array of parts totaling $60, including 2 nylon pins that may have been right and left. Only one worked so hopefully that was the reason - not clear on the parts list. End caps are plastic and broken tabs trying to put them on so they are glued in place. Bolt also had to be replaced and was already taped with Teflon, presumably from the original Samsung install, and might have been the reason for the handle failure. Anyway, all is well... Read more
Refrigerator Fan Blade is a crucial component for ensuring your Samsung refrigerator operates efficiently. This genuine OEM part is designed to maintain optimal airflow within your appliance, promoting consistent cooling and preventing temperature fluctuations. By replacing a worn or damaged fan blade with this high-quality part, you can restore your fridgeGÇÖs performance, keeping your food fresh and extending the lifespan of your refrigerator. The fan blade is crafted with precision to ensure a perfect fit for a variety of Samsung refrigerator models, making installation straightforward and hassle-free. Its durable construction resists wear and tear, providing reliable performance even in demanding environments. Additionally, a properly functioning fan helps reduce energy consumption by allowing your refrigerator to run more smoothly. Whether youGÇÖre experiencing unusual noises, inadequate cooling, or need to replace a broken fan blade, the Refrigerator Fan Blade offers a dependable solution. Trust in this genuine OEM part to deliver the quality and performance you expect from your Samsung appliance, enhancing your overall kitchen experience.
Fix a refrigerator door that won't close properly with this auto-close roller assembly. Restores smooth door movement and automatic closing action.
The replacement parts work perfect. Thanks Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.