Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
The Refrigerator Fan Blade Spring is designed to maintain the proper tension and alignment of your refrigerator's fan blades, ensuring efficient airflow and optimal cooling performance. This essential component plays a crucial role in the smooth operation of your Samsung refrigerator, preventing noisy vibrations and maintaining consistent temperature control. Made as a genuine OEM part, it guarantees a perfect fit and reliable performance, matching the quality and standards of your original appliance parts. Compatible with a wide range of Samsung refrigerator models, this fan blade spring is easy to install, allowing you to restore your fridge's functionality without hassle. By replacing a worn or damaged spring with this authentic part, you can enhance the longevity and efficiency of your refrigerator, providing a better cooling experience for your food storage needs. Trust in the Refrigerator Fan Blade Spring to deliver the dependable performance your Samsung refrigerator requires.
Removed refrigerator panel, disconnected light and fan power. Removed fan assembly and replaced motor, grommets and fan attachment spring. Unit had adhesive on spring to help hold the spring. Chatted with customer service and clarified that spring and fan would easily pull off motor shaft. Adhesive probably was extra measure used during original build of the fridge. Noise was due to fan rubbing on housing. New fan position set to avoid any rubbing. Read more
Ice dispenser only crushing or not dispensing? This solenoid valve controls ice flow and cube selection. DIY-friendly repair with video guide.
Replaced ice dispenser solenoid Read more
Replaces the plastic cover assembly that shields your refrigerator's pantry rail. Needed when the original cover is cracked, broken, or missing.
Mounting screw for refrigerator door hinges and internal components. Replace if stripped, missing, or damaged during hinge repair or door removal.
Ordered the pieces from here. Downloaded the user manual. I never work on appliances but I couldn't justify the $200 a service tech would have charged to fix a $35 part. Followed the manual and removed the door. Replaced the broken plastic pieces. BE VERY CAREFUL not to strip the screws. I did and that's another story. Very easy to fix. You will need a second person to help guide the door back onto the frame. Read more
Replacement ice bucket for refrigerator freezer compartments. Holds and organizes ice cubes. Needed when original is cracked, broken, or missing.
Used live chat. Nathan took 5 minutes to find right parts. we talked with lowes 3 seperate time , they could not find the parts we needed. We ordered the parts with Nathan and received the parts in 2 days. Read more
The Refrigerator Dispenser Tray is a vital component for your Samsung refrigerator's dispenser system. Crafted as a genuine OEM part, it guarantees compatibility and a secure fit with your appliance. This tray provides a stable platform for your dispenser's buttons and components, ensuring smooth and efficient operation. Its durable construction helps prevent leaks and spills, maintaining a clean and orderly interior. Installing the Refrigerator Dispenser Tray is straightforward, allowing you to swiftly restore your refrigeratorGÇÖs functionality without professional assistance. Designed to withstand daily use, it enhances the reliability of your dispenser, giving you consistent access to beverages and water. Whether replacing a damaged or worn-out tray, this genuine OEM part offers a high-quality solution tailored for Samsung refrigerators, improving your overall cooling experience.
Bought new case-ice-route from AppliancePros.com for Samsung Refrig RF267ABRS. Part arrived intact and on-time. On my Samsung model, the original part has a chute (clear piece) with a molded channel for the water dispensing tube to sit in. The new part did not have this molded channel in the clear piece hence I took a rasp and carved it out. After some minor filing, completed the R&R and everything works great. To remove the control panel, remove the small phillips screw on the bottom of the... Read more
Missing water dispenser drip tray? This catch tray collects water and ice spillage from your refrigerator's dispenser. Quick snap-in installation.
After discovering that our leaking fridge was caused by a plastic water storage tank I went on the hunt to find a replacement. Sadly there is no replacement available instead you have to purchase the entire filter tank assembly. Since I only needed the tank I carefully took apart the new unit and removed the tank. The biggest hassle is making sure you go slow so you can remove the front of the housing. Then the right side of covers the tank, pump and lines. The lines are the easiest to... Read more
Clear plastic crisper drawer that mounts on sliding rails in the fresh food compartment. Replace when cracked, broken, or missing to restore proper storage.
Replaced with new Vegetable Drawer. Read more
Supports and guides French doors for smooth operation. Replace if cracked, broken, or causing door misalignment. Installs on the mullion between doors.
Seals your refrigerator's ice chute to prevent water leaks and melting ice from dripping into your fridge. Replace if ice cubes are wet or water pools below.
I watched your online video. Grabbed a small screwdriver, replaced gasket in under 5 minutes. Read more
Upper door handle support bracket for refrigerators. Replaces broken or cracked handle mounting hardware. Installs on refrigerator door interior.
Replaced Case Water Filter assembly DA81-05883A. Please read my post entirely before starting. I completed all the tasks that I could without having to disconnect the refrigerator since it was full of food. First I removed the panel on top of the refrigerator that covers the water line that feeds the dispenser. Do not disconnect any electrical connections or the water line at this time. Remove the panel from the back bottom of the refrigerator that covers the compressor and water valve,... Read more
Clear plastic cover guard for left refrigerator door shelf. Snaps into place to secure items in door bins. Replace if cracked, broken, or missing.
Replaced with a new guard. Read more
Fixes refrigerator not cooling, freezer not working, or unresponsive display issues. Controls electrical functions and temperature regulation.
Replaced both boards. Read more
The Bottom-Mount Refrigerator Fan Propeller is essential for maintaining optimal airflow in your Samsung bottom-mount refrigerator. This genuine OEM part ensures consistent temperature distribution, helping to keep your food fresh and your appliance running efficiently. Crafted with precision, the fan propeller operates smoothly and quietly, reducing energy consumption and preventing overheating. The Bottom-Mount Refrigerator Fan Propeller is specifically designed to fit a range of Samsung bottom-mount refrigerator models, guaranteeing a secure and seamless installation. Replacing a worn or damaged fan propeller with this high-quality part restores your refrigerator's performance, enhancing its longevity and reliability. Trust in this genuine OEM part to provide the functional benefits you need for a well-performing and dependable refrigerator.
Ordered the two motors plus ordered the fan blades since I was afraid one might break during replacement. Changed out without breaking Freezer and both ice makers now working fine Read more
This assembly includes the ice route case, chute door, and funnel frame that guides ice from the ice maker through the dispenser and into your glass. It controls the path ice follows when dispensed and helps prevent cold air from leaking back into the freezer. Replace this assembly if ice is jamming in the chute, the dispenser door isn't sealing properly, or ice is not dispensing smoothly.
Support bracket that secures the freezer door handle to your refrigerator. Replace if broken, cracked, or damaged during handle removal or impact.
Ordered parts to reattach the handle online. I ordered an array of parts totaling $60, including 2 nylon pins that may have been right and left. Only one worked so hopefully that was the reason - not clear on the parts list. End caps are plastic and broken tabs trying to put them on so they are glued in place. Bolt also had to be replaced and was already taped with Teflon, presumably from the original Samsung install, and might have been the reason for the handle failure. Anyway, all is well... Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.