S20cs80sns /01 Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

Best Seller

Washer Water Fill Hoses

4.9 (48)

By: Pro

Part Number: TJ725RBFFP

Replacement water fill hoses for washing machines. Connect home water supply to washer. Replace when cracked, leaking, or showing rubber wear or corrosion.

Do-It-Yourself Stories from Customers like You Washer would not spin nor adgitate Jeff A. • Stow , OH • June 28, 2015

Motor control board was flashing 4 times, indicating that the mode shifter had an error. I disconnected the mode shifter's wire from the controller and measured the resistance between the 2 leads with an ohmmeter. Since the reading was infinite, that meant that the mode shifter coil or in-line thermal sensor was electrically open, i.e. bad. As this fix is near a complete tear-down of the washing machine, here are a few tips I discovered. 1) the hub nut is difficult to remove and you need a... Read more

$13.71

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Washer Timer Control

5.0 (10)

By: Ge

Part Number: WH12X10202

If your washer won't shut off or won't advance through cycles, the timer may have failed. This repair typically takes 10-15 minutes with basic tools.

Do-It-Yourself Stories from Customers like You Washer did not shut off and did not cycle properly Dan F. • Gig Harbor , WA • August 10, 2014

Easy. Opened the front panel, removed the timer, went on line with the part number. Part arrived the next day and I installed it in 2 minutes. FIXED. Read more

$229.95

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Washer Water Inlet Valve

5.0 (13)

By: Ge

Part Number: WH13X10025

Fixes washer overfilling or water dripping when off. This triple water inlet valve restores proper fill control. Moderate DIY repair, 30-60 minutes.

Do-It-Yourself Stories from Customers like You Water was leaking into wsher tub when not in use Steven B. • Irwin , PA • January 02, 2015

Replaced the triple water valve, took 10 minutes. all fixed. Read more

$74.60

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Ge part

Washer Tub Dampening Strap Retainer

4.8 (12)

By: Ge

Part Number: WH1X2726

Holds tub dampening straps in place on your washer. Replace if cracked, broken, or worn from heavy loads. Includes installation video guide.

Do-It-Yourself Stories from Customers like You Agitation and spin cycle completely stopped Tonya G. • Philadelphia , PA • September 02, 2020

I have a 14 year old GE washing machine that had been making a lot of noise while running but had eventually just stopped flat. The agitator and spin cycle would not run. I found this site and made excellent use of all the repair videos to study about my issue. I put in my machine model number and I Immediately was able to start honing in on what my problem could be from website advice about popular repair parts, stories others had shared about their similar machine issues and watching videos,... Read more

$12.95

IN STOCK

Ships Today Guaranteed

Add to Cart

Do you need help?

Get Questions Answered Instantly.

1-877-477-7278 Online

Live Help

Genuine Frigidaire part

Dryer Support Roller Washer

By: Frigidaire

Part Number: 134716700

Washer that fits between the support roller and shaft in your dryer. Replace if worn, cracked, or missing to maintain proper drum alignment and support.

$1.36

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Whirlpool part

Screw (#8-18 X 5/8 In.)

4.5 (2)

By: Whirlpool

Part Number: WP98165

This replacement screw secures panels, brackets, and components inside appliances. Replacing a missing or stripped fastener restores a snug, rattle-free fit using the correct #8-18 thread and 5/8-inch length.

Fastens covers, trims, brackets, and internal parts to the cabinet/frame
Used wherever a #8-18 x 5/8 screw is specified
Replace if the original is missing, corroded, stripped, or will not tighten
Symptoms: loose or rattling panels, gaps, or hardware that backs out

What's included: 1 screw (#8-18 x 5/8 in.) Installation notes:

Disconnect power; shut off gas/water before servicing
Match thread and length; start by hand to avoid cross-threading
Use the correct driver bit and tighten snugly—do not overtighten
Inspect and replace damaged clips or tabs before securing

Do-It-Yourself Stories from Customers like You Missing parts Barry E. • Long Beach , WA • July 20, 2019

Replace Read more

$7.56

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Ge part

Washer Hose Clamp Kit

5.0 (5)

By: Ge

Part Number: WH1X2036

Secures washer hoses at pump, tub, and valve connections to prevent leaks and hose blow-offs. Replace worn or missing clamps for a tight seal. Confirm fit.

This part fixes the following symptoms

Leaking

Do-It-Yourself Stories from Customers like You Drain hose was leaking Haide H. • Chatham Township , NJ • May 01, 2017

The video was very helpful. the hardest part is getting off old rusted parts. I had to use a hacksaw to remove one of the old clamps. I had to open the bottom of the washing machine to remove of the other clamp. Putting the new parts on was easy. Getting everything apart was a challenge. Putting the new parts on was an easy 5 minute job. Read more

$15.95

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Ge part

Washer Screws

5.0 (7)

By: Ge

Part Number: WH2X694D

These mounting screws secure various internal components within your washing machine. They hold parts like panels, brackets, and mechanisms in their proper positions during wash cycles. Replace if screws are missing, stripped, or causing rattling noises during operation.

Do-It-Yourself Stories from Customers like You Agitation and spin cycle completely stopped Tonya G. • Philadelphia , PA • September 02, 2020

$17.95

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Whirlpool part

Screw

5.0 (1)

By: Whirlpool

Part Number: WP489464

This is a replacement screw designed to work with a wide range of household appliances. It is used for many purposes in these appliances, from holding body panels together to securing electronics into control boards. However, screws are subject to damage through corrosion, impact, and improper installation/removal. In most cases, the primary damage to this screw is through corrosion – it may become rusted or corroded in place, depending on the appliance and the maintenance provided during its lifespan. The screw may also be stripped or rounded due to improper removal or installation. If the screw is damaged, lost, or corroded in place, it will need to be replaced. In most cases, removal will require nothing more than a Phillips head screwdriver or the appropriately sized socket with a ratchet. However, if the screw is damaged, it may require a tap set to remove it from its mounting location. Note that this is a genuine OEM replacement screw made from durable, high-quality metal, and is sold individually. It fits Whirlpool, Maytag, Roper, Estate, Amana, Crosley, and Thermador appliances. It is used in over 150 machines, ranging from washers and dryers to air conditioners.

Do-It-Yourself Stories from Customers like You Cover unit in back of refrigerator need to be replaced Lawrence T. • Catalina , AZ • March 20, 2016

VERY EASY TO REPLACED OLD COVER-UNIT NEW COVER-UNIT. Read more

$9.63

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Ge part

Washer Lid Hinge Bushing

5.0 (1)

By: Ge

Part Number: WH01X10025

Double-style bushing supports the washer lid hinge pin. Replace worn or cracked bushings to restore smooth, quiet lid operation and proper alignment.

This part fixes the following symptoms

Lid or door will not open

Do-It-Yourself Stories from Customers like You No problem just needed freshening up. No sense in buying new when the old is better. James C. • New Smyrna Beach , FL • July 16, 2019

Not hard when you have videos and a mechanical background....piece of cake.... Read more

$16.57

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Ge part

Locking Clip

5.0 (6)

By: Ge

Part Number: WH02X10279

This locking clip secures a mating part—often a control knob—onto its shaft on select laundry appliances. Replacing a worn or missing clip restores a tight fit so controls stay in place and operate as intended during use.

Locks a knob, lever, or similar component onto its shaft/post to prevent it from slipping off
Maintains a firm fit to reduce wobble and intermittent control engagement
Replace if the clip is bent, fatigued, corroded, or missing
Typical symptoms include a knob that falls off, feels loose, or spins without engaging

What's included: Locking clip only Install notes:

Disconnect power to the appliance; turn off water supply for washers
Pull the affected component straight off to access the clip
Use needle-nose pliers to remove/install the clip; avoid deforming it
Ensure the clip is fully seated; test for a snug fit before reassembly

Do-It-Yourself Stories from Customers like You Washer would not spin nor adgitate Jeff A. • Stow , OH • June 28, 2015

$10.31

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Ge part

Washer Leveling Leg

5.0 (6)

By: Ge

Part Number: WH2X1187

Adjustable leveling leg threads into washer base to stabilize cabinet and reduce vibration. Replace if cracked, broken, or missing for proper support.

Do-It-Yourself Stories from Customers like You The leveling legs on my ge washing machine was striped out Bradley W. • Alma , GA • July 29, 2016

Took the old leveling legs out and put the new ones in Read more

$19.95

IN STOCK

Ships Today Guaranteed

Add to Cart

Shop With Confidence

Over 13 Million Orders Shipped

365-Day Returns

Hassle-free Returns

Fast Delivery

1.7 Days on Average!

Free Tech Support

On all purchased parts!

Genuine Whirlpool part

Nut

4.0 (1)

By: Whirlpool

Part Number: WP486692

The Nut is an OEM replacement part for Whirlpool refrigerators. This small yet essential component is used to secure various parts of the refrigerator, such as shelves, panels, or brackets, ensuring stability and proper alignment. Its durable design ensures reliable performance in the demanding environment of a refrigerator.

Causes of a bad or missing Nut can include wear over time, accidental stripping of threads, or loss during maintenance or repairs. A damaged or missing nut can lead to loose components and reduced functionality.

Symptoms of a bad or missing Nut include:

Loose or wobbly shelves, brackets, or panels
Difficulty keeping refrigerator components securely in place
Rattling or unusual noises during operation

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Condenser cooling motor fan was making noise occasionally stopping Jeffrey S. • Montgomery , TX • June 26, 2016

Replaced motor, fan and lock-nut. My repair was on a built in Refrigerator-Freezer so most of the time was spent on pulling out and putting back the unit to get to the area I needed to behind the upper top. Read more

$5.95

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Ge part

Washer Lid Bumper

5.0 (1)

By: Ge

Part Number: WH1X2722

Cushions where the washer lid meets the top panel to soften closure and protect the finish. Replace worn, cracked, or missing bumpers to reduce noise.

Do-It-Yourself Stories from Customers like You Noisy evaporator fan Jason L. • Barnegat , NJ • August 02, 2025

The problem was most likely the evaporator fan motor but it could have been a bad blade, loose parts or bad motor mounts. Hard to tell without taking everything apart and inspecting. Since fridge was 17 years old I decided to order the entire evaporator fan assembly as shown in the parts diagram including fan blade, motor brackets, motor, motor mounts, screws, etc. Getting to the assembly involved removing the ice maker unit plus the entire rear inside of the freezer section. Parts cost around... Read more

$4.66

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Ge part

Washer Tub Assembly

5.0 (2)

By: Ge

Part Number: WH45X20473

Replaces a cracked or leaking wash tub to restore water containment and drum support. Fixes leaks, rubbing noises, and vibration. Confirm fit by model.

Do-It-Yourself Stories from Customers like You Ge top load washer loud noises and oily spots inside bottom of cabinet Tom K. • Saint Joseph , MI • March 21, 2017

I ordered a new mode selector and new tub bearing. Upon disassembly, I noticed that the plastic outer tub had actually heated up around the tub bearing and tub seal area, such that the new tub seal did not fit tightly. I ordered a replacement outer tub, and reassembled all the new parts. During assembly, I installed the new tub seal upside down, but recognized it while re-watching the how-to video. I pulled the assembly back off and flipped the seal over, then reassembled it again. I also put... Read more

$176.95

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Frigidaire part

Access Panel Screw

5.0 (1)

By: Frigidaire

Part Number: 154419403

Black

Do-It-Yourself Stories from Customers like You Purchased a new home and the kick plate assembly did not come with dishwasher. Maxence D. • Fort Lauderdale , FL • September 03, 2017

Appliance Parts Pro made finding the product easy - through their online forms and copies of original manuals. In addition, the self help guide video demonstrated how quick and easy this part was to install. Plus shipping was overnight! Thank you Appliance Parts Pro! Read more

$12.23

IN STOCK

Ships Today Guaranteed

Add to Cart

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Need help finding dishwasher parts?

S20cs80sns /01 Parts

Washer Water Fill Hoses

Washer Timer Control

Washer Water Inlet Valve

Washer Tub Dampening Strap Retainer

Dryer Support Roller Washer

Screw (#8-18 X 5/8 In.)

Washer Hose Clamp Kit

Washer Screws

Screw

Washer Lid Hinge Bushing

Locking Clip

Washer Leveling Leg

Nut

Washer Lid Bumper

Washer Tub Assembly

Access Panel Screw