Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Trim kit frames your range oven door for a finished look. Replaces broken, cracked, or missing trim pieces damaged from regular use or heat exposure.
Kit arrived promptly. it took help of a friend and 45 minutes to install Read more
The Screw is an OEM part for Whirlpool appliances that is responsible for securing various parts in place. The screw ensures a tight and secure fit, preventing any loose parts. A bad screw can occur due to wear and tear or accidental damage. If the screw becomes stripped, rusted, or lost, it can lead to instability or even malfunction of the affected parts.
Symptoms of a bad screw include:
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
Overall the fix wasn't too hard. The challenge was putting the oven door back together and holding it together while trying to tighten the screws. Enlisted my wife's help to hold the door and at first the handle screws wouldn't tighten. My cordless screwdriver's battery was under-charged. Once I switched batteries I was able to tighten the screws. Seemed like I needed to push too hard (my wife freaked "not so hard you will strip them!") however pushing hard was what was needed. Both screws... Read more
Adjustable leveling leg installs on the front or rear corners of your range. Replace if broken, cracked, or worn to stabilize and level your appliance.
Installed it according to video watched. Read more
This panel forms the floor of the oven, sitting above the bake element or burner to shield it from spills and provide a smooth, stable surface. Replace a warped or damaged panel to help maintain proper heating and easier cleanup. What it does:
The problem is a finicky ignition system, Direct Spark Ignition. Apparently Whirlpool redesigned the igniter/burner assembly slightly to make it more reliable. The repair is very easy. Turn off power, but you don't need to turn off gas. Remove oven bottom and flame spreader, then remove burner/igniter assembly, one screw at front, one at back. Lift out burner assembly carefully to avoid stretching wire. Pull electric connector from pin on burner/igniter assembly. Vacuum to clean oven. ... Read more
Replacement oven door handle for ranges. Installs on the front of the oven door. Order when your handle is cracked, broken, or detached. Requires screws.
Self-tapping screw used in range assembly. Features 8-18 thread size and 0.375 inch length. Also used in some washer models as cross-appliance hardware.
I replaced all three baffles since the new one was a different design than then old one. i watched the video and the repair went well, except for hitting my hand with a hammer while removing the old baffles. went just like the video said it would Read more
Size: 8-18 x 1/2 inch.
Whenever the drawer was opened, it would fall of the guide rails. This lead to the drawer being crooked several times. I took the drawer out and noticed one of the glides was missing. Ordered a new pair, popped it on and now the drawer slides properly. Read more
Fix a gas burner that won't light or clicks but doesn't ignite. This range surface burner igniter creates the spark to light your stovetop. 15-30 min repair.
I removed the burners and replaced the igniters. The burners must be removed because the igniters go underneath them. This job turned out to be very difficult because my stove is 16 years old and the screws holding down the igniters were completely rusted and bound to the stove top, so I had to drill out all of the screws. Also, the burners were bound to the gas flues by mineral deposits and separating them was very difficult. Once I got the stove top up, I threaded the igniter wires to the... Read more
Mounting screw for securing trim, hinges, drawer guides, and interior components. Replace if missing, stripped, or broken during repair or maintenance.
The replacement part was identical, arrived quickly as promised, and took only a couple of minutes to install. Excellent service. Very happy with the end result and the whole process. Read more
Replacement 10-32 machine screw for securing panels, brackets, and internal components. Ideal for replacing missing, stripped, or damaged hardware.
Ordered Bake Element, Y04100019 (Whirlpool AP4283614) to replace a broken bake element on my 30-year old Jenn-Air Model S125 Downdraft Slide-in electric range. Received the element very quickly but it had been damaged in shipping. Called AppliancePartsPros to report this and they quickly shipped another element - very easy process. To install the element, I turned off the power to the range, put on rubber gloves (just in case) and removed the two sheet metal crews at the rear of the oven -... Read more
Replacement control knob for range burners. Installs on the control panel to adjust heat levels. Replace if cracked, broken, or missing from wear.
Took down model# and tried to match on website. However there were 5 sub-models. Had to look very carefully at the pictures of the parts. Also, there were 3 different size caps on the range. Ordered one small, 2 medium, and one large. Arrived in 48 hours. Perfect match. Placed on burners. Repair complete. Read more
Replacement control knob for range burner or oven temperature. Installs on control panel. Replace when cracked, broken, or missing. Easy snap-on installation.
I ordered the knob and had it back and on my range before my pickles were ready to can. Loved the fantastic response time. Read more
This factory screw secures appliance components to their mounting points. Replace missing, worn, or stripped hardware to restore a tight fit, proper alignment, and quieter operation across the affected assembly.
Replace stained, rusted, or discolored cooktop grates with this complete grate kit. Restores a stable surface for pots and pans on your gas range.
Looked up the part number for replacing the burner dgrates in the 465 gas oven owner / parts manual. Plugged in the number in your easy to use website. Read over a few FAQs on the part I was ordering that answered my question of yes this is for a set of four. That was very helpful by the way. Ordered the parts and two days later they arrived to my door step. Read more
If your gas range burner won't light or clicks but doesn't ignite, you may need a new surface igniter. Simple DIY repair with basic tools in 15 minutes.
We replaced the Igniters, Spark Module, Door Seal, and Knobs. Read more
This replacement screw secures appliance panels and components so they stay tight and aligned during use. Replacing a missing or damaged screw restores a solid fit and helps eliminate rattles, loose trim, or shifting parts.
After being told by a service repairman that it would cost me close to $200 to repair, I resolved to just not use the dispenser. After about a year, I had decided that I wanted to repair it and would look at the options myself. At the least, I could figure out which parts were needed to repair it and have them on hand for a service guy if I determined I could not do the job myself. The more I studied it, the more I felt confident that I could do it, and sure enough, when the part arrived - a... Read more