Sf375pee Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

Best Seller

Genuine Whirlpool part

Oven Bottom Panel

4.9 (18)

By: Whirlpool

Part Number: WP3195097

This panel forms the floor of the oven, sitting above the bake element or burner to shield it from spills and provide a smooth, stable surface. Replace a warped or damaged panel to help maintain proper heating and easier cleanup. What it does:

Forms the oven floor above the bake element or burner
Shields the heat source from drips and debris to help prevent scorching and odors
Supports designed airflow and heat distribution in the cavity
Common replacement signs: warped or dented panel, rust or chipped finish, smoke/odors from spills beneath the panel, or uneven baking results

What's included:

1 oven bottom panel

Install notes:

Disconnect power (and shut off gas supply for gas ranges) before servicing; allow the oven to cool completely
Remove oven racks; release front fasteners or clips and lift the old panel out of the rear tabs (method varies by model)
Seat the new panel into rear tabs, align the front edge, and secure as originally installed
Verify the panel sits flat and clear of the bake element or burner before reassembling

Do-It-Yourself Stories from Customers like You Oven burner occasionally failed to light usually in the middle of roasting a turkey or chicken oven then "locked down " Ulrich O. • Millburn , NJ • January 05, 2015

The problem is a finicky ignition system, Direct Spark Ignition. Apparently Whirlpool redesigned the igniter/burner assembly slightly to make it more reliable. The repair is very easy. Turn off power, but you don't need to turn off gas. Remove oven bottom and flame spreader, then remove burner/igniter assembly, one screw at front, one at back. Lift out burner assembly carefully to avoid stretching wire. Pull electric connector from pin on burner/igniter assembly. Vacuum to clean oven. ... Read more

$97.95

Compare At:: $117.54
You Save:: $19.59

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Screw

4.9 (12)

By: Whirlpool

Part Number: WPY706189

The Screw is an OEM part for Whirlpool appliances. This specific screw is used in various locations within Whirlpool appliances, securing components and ensuring the stability and proper alignment of parts. It is designed to fit precisely and maintain a firm hold, contributing to the overall functionality and safety of the appliance.

Over time, screws can become worn or stripped due to regular use, corrosion, or over-tightening.

Causes of a bad screw include wear and tear, exposure to moisture leading to rust, and over-tightening which can strip the threads.

Symptoms of a bad screw include:

Loose or wobbly components
Misalignment of parts
Noise due to vibrating or loose parts
Difficulty in securing or removing the screw

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Do-It-Yourself Stories from Customers like You Drum baffle broke off James H. • Etna , OH • March 21, 2017

I replaced all three baffles since the new one was a different design than then old one. i watched the video and the repair went well, except for hitting my hand with a hammer while removing the old baffles. went just like the video said it would Read more

$7.95

Compare At:: $9.46
You Save:: $1.51

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Surface Ignitor

5.0 (51)

By: Whirlpool

Part Number: W11032529

The Surface Burner Igniter is an OEM part for Whirlpool ranges and cooktops. This component is crucial for igniting the gas that fuels the surface burners, ensuring that the burners light up safely and efficiently when the control knob is turned. The igniter produces a spark that lights the gas, allowing you to cook with precision and control. The surface burner igniter wire measures approximately 43" long.

Symptoms of a failing Surface Burner Igniter include:

The burner not lighting or taking multiple attempts to light
Weak or no spark produced when trying to ignite the burner
A clicking sound without ignition of the burner
Visible damage or wear to the igniter tip

Causes of a bad surface burner igniter can include regular wear and tear from frequent use, exposure to spills and food debris that can affect its function, and electrical issues such as a short circuit or a worn-out spark module.

This OEM part is also compatible with some models from Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore.

This part fixes the following symptoms

Won't start

Do-It-Yourself Stories from Customers like You Stove top ignitors not working Daniel M. • Gilroy , CA • November 24, 2015

I removed the burners and replaced the igniters. The burners must be removed because the igniters go underneath them. This job turned out to be very difficult because my stove is 16 years old and the screws holding down the igniters were completely rusted and bound to the stove top, so I had to drill out all of the screws. Also, the burners were bound to the gas flues by mineral deposits and separating them was very difficult. Once I got the stove top up, I threaded the igniter wires to the... Read more

$42.95

Compare At:: $51.11
You Save:: $8.16

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Screw

4.9 (11)

By: Whirlpool

Part Number: WP3400832

Screw for side trim.

Do-It-Yourself Stories from Customers like You The right front drawer support/guide was broken off Kenneth P. • Albany , OR • March 10, 2019

The replacement part was identical, arrived quickly as promised, and took only a couple of minutes to install. Excellent service. Very happy with the end result and the whole process. Read more

$5.95

Compare At:: $7.02
You Save:: $1.07

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Screw (10-32)

4.9 (8)

By: Whirlpool

Part Number: WP179051

This 10-32 machine screw secures panels, brackets, and internal assemblies in your appliance. Replacing missing or stripped hardware restores a tight, rattle-free fit and helps keep components properly aligned.

Provides a threaded fastener for metal-to-metal connections
Helps maintain correct alignment of panels, brackets, and housings
Replaces missing, rusted, or stripped screws
Symptoms include loose or vibrating panels, gaps/misalignment, or hardware that won't tighten

What's included: 1 screw Install notes:

Disconnect power (and shut off gas/water, if applicable) before servicing
Match the 10-32 thread and length to the original screw for the location
Start by hand to avoid cross-threading; tighten snugly without over-torquing
Retain and reinstall any original clips, spacers, or washers used in your model

Do-It-Yourself Stories from Customers like You Bake element broken on jenn air model s125 downdraft slide in range Patricia D. • Raleigh , NC • May 02, 2015

Ordered Bake Element, Y04100019 (Whirlpool AP4283614) to replace a broken bake element on my 30-year old Jenn-Air Model S125 Downdraft Slide-in electric range. Received the element very quickly but it had been damaged in shipping. Called AppliancePartsPros to report this and they quickly shipped another element - very easy process. To install the element, I turned off the power to the range, put on rubber gloves (just in case) and removed the two sheet metal crews at the rear of the oven -... Read more

$8.36

Compare At:: $9.86
You Save:: $1.50

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Screw

5.0 (7)

By: Whirlpool

Part Number: WP3196175

Size: 8-18 x 1/2 inch.

Do-It-Yourself Stories from Customers like You Oven drawer wouldn’t slide properly. Nick B. • Hanover , MD • November 09, 2020

Whenever the drawer was opened, it would fall of the guide rails. This lead to the drawer being crooked several times. I took the drawer out and noticed one of the glides was missing. Ordered a new pair, popped it on and now the drawer slides properly. Read more

$5.95

Compare At:: $7.14
You Save:: $1.19

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Oven Door Handle

4.4 (5)

By: Whirlpool

Part Number: WPW10202217

Color: Black. For white order WPW10202216. For almond order 8522446.New mounting screws need to also be ordered WP3196164.

Do-It-Yourself Stories from Customers like You Replaced broken oven door handle Peter R. • Baltimore , MD • January 25, 2015

Overall the fix wasn't too hard. The challenge was putting the oven door back together and holding it together while trying to tighten the screws. Enlisted my wife's help to hold the door and at first the handle screws wouldn't tighten. My cordless screwdriver's battery was under-charged. Once I switched batteries I was able to tighten the screws. Seemed like I needed to push too hard (my wife freaked "not so hard you will strip them!") however pushing hard was what was needed. Both screws... Read more

$115.49

Compare At:: $136.28
You Save:: $20.79

IN STOCK

Ships Monday Guaranteed

Add to Cart

Genuine Whirlpool part

Screw, 1 Piece

4.9 (18)

By: Whirlpool

Part Number: W11233072

This factory screw secures appliance components to their mounting points. Replace missing, worn, or stripped hardware to restore a tight fit, proper alignment, and quieter operation across the affected assembly.

Fastens panels, brackets, covers, or internal parts to the chassis or frame
Helps maintain alignment and support, reducing rattle, vibration, or looseness
Replaces missing or damaged screws that have backed out, broken, or stripped
Restores secure mounting after service when original hardware is lost

What's included: 1 screw Install notes:

Disconnect power; shut off water or gas supplies before servicing
Use the correct driver; start threads by hand to avoid cross-threading
Match length and thread to the original location; do not substitute with longer hardware
Tighten snugly; do not overtighten into plastic or thin metal

Do-It-Yourself Stories from Customers like You Bake element broken on jenn air model s125 downdraft slide in range Patricia D. • Raleigh , NC • May 02, 2015

$20.95

Compare At:: $24.93
You Save:: $3.98

IN STOCK

Ships Monday Guaranteed

Add to Cart

Genuine Whirlpool part

Front Drawer Glide

5.0 (17)

By: Whirlpool

Part Number: WP3195546

Oven broiler drawer glide mounts to front of the drawer. For the rear drawer glide that mounts to the body order WP8053334.

This part fixes the following symptoms

Door won't close

Do-It-Yourself Stories from Customers like You The right front drawer support/guide was broken off Kenneth P. • Albany , OR • March 10, 2019

The replacement part was identical, arrived quickly as promised, and took only a couple of minutes to install. Excellent service. Very happy with the end result and the whole process. Read more

$5.95

Compare At:: $7.08
You Save:: $1.13

IN STOCK

Ships Monday Guaranteed

Add to Cart

Genuine Whirlpool part

Hinge, Door

4.8 (9)

By: Whirlpool

Part Number: WP8053807

This hinge is for painted door only. For stainless steel door use WP8272822.

This part fixes the following symptoms

Door won't close

Do-It-Yourself Stories from Customers like You The oven door would not close completely William R. • Emporia , KS • July 27, 2016

This oven was a Kenmore model #66595822003. I replaced both spring hinges. This oven was a white oven so it took the MFG# WP8053807 hinge (order two of them). They are the same hinge. No left or right. To get the door off the oven, open the door all the way open, I installed pins (preferably only 1/4" long) in the holes of both hinges. Then remove the spring steel retainers above old hinges in the oven frame. These holds hinges in place. Now close the door until hinge stops on pins. Lift up... Read more

$75.63

Compare At:: $90.00
You Save:: $14.37

IN STOCK

Ships Monday Guaranteed

Add to Cart

Genuine Whirlpool part

Surface Burner Igniter (Spark Electrode)

4.5 (4)

By: Whirlpool

Part Number: W11087383

This surface burner igniter creates the arc that lights gas at the cooktop/range burner. Replace a cracked or worn electrode to restore fast, reliable ignition and reduce repeated clicking when trying to light a burner.

Generates a high-voltage spark at the surface burner to ignite gas
Typical symptoms: no spark, intermittent/weak spark, burner lights only with a match, or constant clicking
Mounts near the burner head; works with the spark module and switch harness
Inspect for a cracked ceramic insulator, damaged tip, or loose lead

What's included: One surface burner igniter/electrode

Disconnect power and shut off gas before servicing
Handle the ceramic insulator carefully; avoid touching or contaminating the electrode tip
Confirm proper gap and alignment to the burner head/cap after installation
Check the spark module, switch harness, wiring connections, and burner cap/grounding

Do-It-Yourself Stories from Customers like You The old and worn out. Rodney S. • Rockdale , TX • December 13, 2022

We replaced the Igniters, Spark Module, Door Seal, and Knobs. Read more

$36.95

Compare At:: $44.34
You Save:: $7.39

IN STOCK

Ships Monday Guaranteed

Add to Cart

Genuine Whirlpool part

Front Leveling Leg, Single

5.0 (3)

By: Whirlpool

Part Number: WP3196037

This front leveling leg adjusts the height at the front of your appliance to keep it level and steady. Replacing a worn or missing foot helps eliminate rocking, protect floors, and make fine leveling adjustments simple.

Threads into the base at the front corner to raise or lower the unit for accurate leveling
Stabilizes the appliance to minimize rocking and vibration when opening the door or using the cooktop
Restores proper adjustment when the original foot is stripped, bent, or missing
Common signs include a wobbling appliance, difficulty leveling, or metal-to-floor contact/scuffing

Includes: 1 front leveling leg. Install notes:

Disconnect power; turn off the gas supply
Protect the floor and use an assistant to carefully slide and tip the appliance
Start the new leg by hand to avoid cross-threading; finish adjustment with a wrench
Level front-to-back and side-to-side, then verify stability before restoring service

Do-It-Yourself Stories from Customers like You Bought a used stove needed cosmetic fixes. Wendy G. • Defiance , OH • November 09, 2023

Could not level stove. Front leveling legs had pieces broken out where leg contacted floor. Back leveling legs were worn and did not stay at corrected height when stove returned to full weight on floor. Replaced both front and back leveling legs, and stove was able to be leveled. Also bought Touchup Paint for numerous nicks and scratches - color matched perfectly. Read more

$46.95

Compare At:: $55.40
You Save:: $8.45

IN STOCK

Ships Monday Guaranteed

Add to Cart

Genuine Whirlpool part

Surface Igniter

5.0 (3)

By: Whirlpool

Part Number: W11117434

The Surface Igniter is an OEM replacement part for Whirlpool ovens and ranges. It is a crucial component responsible for igniting the gas burners or the oven's baking and broiling elements. The component features an orange wire with a length of 39 inches and a female terminal at the wire end.

Symptoms of a need to replace the surface igniter include:

Failure of the burners or oven elements to ignite or heat up
Delayed ignition or inconsistent heating performance
Visible damage, cracks, or discoloration of the igniter surface

Causes of a faulty surface igniter can include general wear and tear from frequent use, exposure to spills or food debris, electrical malfunctions, or physical damage from impact or mishandling.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore oven and range models.

Do-It-Yourself Stories from Customers like You The old and worn out. Rodney S. • Rockdale , TX • December 13, 2022

We replaced the Igniters, Spark Module, Door Seal, and Knobs. Read more

$43.95

Compare At:: $52.30
You Save:: $8.35

IN STOCK

Ships Monday Guaranteed

Add to Cart

Genuine Whirlpool part

Surface Igniter

5.0 (3)

By: Whirlpool

Part Number: W11122877

The Surface Igniter is an OEM part for Whirlpool gas ranges. This igniter is responsible for lighting the gas burners on the stove, providing the necessary spark to ignite the gas and create a flame for cooking.

Causes of a bad igniter can include wear and tear from regular use, exposure to food spills or cleaning chemicals, or damage from high heat. A malfunctioning igniter can lead to difficulty in lighting the burners or uneven flame production.

Symptoms of a bad surface igniter include:

Burners not lighting or taking longer to ignite
Clicking sound without ignition
Weak or uneven flame
No spark visible when trying to ignite the burner

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You The old and worn out. Rodney S. • Rockdale , TX • December 13, 2022

We replaced the Igniters, Spark Module, Door Seal, and Knobs. Read more

$43.95

Compare At:: $51.86
You Save:: $7.91

IN STOCK

Ships Monday Guaranteed

Add to Cart

Genuine Whirlpool part

Screw

5.0 (1)

By: Whirlpool

Part Number: WP3196557

This replacement screw secures appliance panels and components so they stay tight and aligned during use. Replacing a missing or damaged screw restores a solid fit and helps eliminate rattles, loose trim, or shifting parts.

Fastens brackets, panels, trim, or components to the appliance chassis
Helps correct loose or missing hardware after vibration or service
Replaces stripped, rusted, or broken screws
Can reduce rattling noises or misaligned parts caused by missing fasteners

What's included: One screw Install notes:

Disconnect power; for gas appliances, also shut off the gas supply
Support the part being fastened; start threads by hand to avoid cross-threading
Use the correct driver size; tighten snugly without overtightening
Replace hardware with the exact part number to ensure proper fit

Do-It-Yourself Stories from Customers like You Water dispenser was no longer working Kelly W. • Houston , TX • January 24, 2017

After being told by a service repairman that it would cost me close to $200 to repair, I resolved to just not use the dispenser. After about a year, I had decided that I wanted to repair it and would look at the options myself. At the least, I could figure out which parts were needed to repair it and have them on hand for a service guy if I determined I could not do the job myself. The more I studied it, the more I felt confident that I could do it, and sure enough, when the part arrived - a... Read more

$5.95

Compare At:: $7.08
You Save:: $1.13

IN STOCK

Ships Monday Guaranteed

Add to Cart

Genuine Whirlpool part

Oven Door Handle

5.0 (2)

By: Whirlpool

Part Number: WPW10202216

Color: White. For black order WPW10202217. For almond order 8522446. If your unable to use your old mounting screws order WP3196164.

Do-It-Yourself Stories from Customers like You Oven door handle broke where screw attaches also from previous work i desired to replace the glass support at the bottom of the door Gordon H. • Lake Wales , FL • March 03, 2017

The parts arrived in short time. Had to go to YouTube to learn how to get the door off. My range is about 2004 model. The YouTube video I found did not represent my installation but gave me enough information to remove the clip so the hinge could come free. Installing the handle was difficult to impossible to get the attaching screw in. I finally had to drill out the screw receptacle a bit to where I could get the screw in. I was afraid I would break the plastic the screw goes into. ... Read more

$139.67

Compare At:: $166.21
You Save:: $26.54

IN STOCK

Ships Monday Guaranteed

Add to Cart

Appliance

Appliance

Lawn & Garden

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Sf375pee Parts

Oven Bottom Panel

Screw

Surface Ignitor

Screw

Screw (10-32)

Screw

Oven Door Handle

Screw, 1 Piece

Front Drawer Glide

Hinge, Door

Surface Burner Igniter (Spark Electrode)

Front Leveling Leg, Single

Surface Igniter

Surface Igniter

Screw

Oven Door Handle