She68e15c/18 Parts

Fix E4 water flow errors in your dishwasher with this flow meter sensor. Monitors water volume to ensure proper fill levels during wash cycles.

Fits inside the utensil basket to separate and support flatware for proper spray coverage. Replace if cracked, broken, or missing to restore normal loading.

Replaces the rotating spray arm shower head in your dishwasher's upper rack. Install a new one if yours is cracked, broken, or keeps falling off the tube.

The Divertor Motor is an OEM part for Bosch dishwashers.  This part controls the direction of water flow within the unit. This motor directs the water to different spray arms based on the selected wash cycle, ensuring efficient cleaning by optimizing water usage and spray intensity. 

Causes of damage to the divertor motor can include regular wear and tear, exposure to water and detergent over time, and electrical issues such as wiring problems or faults in the control board.

Symptoms of a failing Divertor Motor include:

• Inadequate water distribution during cycles, which can lead to uneven cleaning results.
• The dishwasher making unusual noises, such as humming or grinding, which may indicate a struggle in the motor function.
• Certain wash zones receiving little to no water, affecting the appliance's overall performance.
• Error codes displayed on the dishwasher panel that relate to water circulation problems.

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

Replacement screw for dishwashers. Secures panels and internal components. Needed when original is stripped, missing, or damaged during repairs.

Secures the dishwasher sump or sump cover to the tub for a tight, leak-resistant seal. Replace if missing, stripped, or damaged to restore stability.

Cutlery basket frame for Bosch dishwashers. Organizes and supports forks, knives, and spoons. Replace if cracked, broken, or damaged from wear.

Replacement trim insert for dishwasher racks. Secures panels and tines, closes gaps for proper alignment. Needed when original is cracked, broken, or missing.

The Spray Head is an OEM replacement part for Bosch dishwashers. It directs pressurized water along the dish racks, targeting every inch of dishware and cookware. Consistent coverage cleans thoroughly without waste.   

Symptoms of a bad spray head can include clogged nozzles, inconsistent patterns, or spray heads that do not oscillate and rotate properly through cycles. Mineral deposits pose blockage risks over time.

Causes of a bad spray head include:

• Uneven or skipped areas of spray coverage inside the machine
• Rotating/oscillating mechanisms that jam or continuously stick  
• Nozzles fully or partially blocked reducing water pressure
• Head assembly detaching from water tub wall or bracket

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

Fix incomplete cycles or poor cleaning caused by a faulty temperature sensor. This NTC sensor monitors water temperature to ensure proper heating and cycle timing.

This genuine replacement bearing supports the washer drum for smooth, stable rotation and helps reduce noise and vibration caused by worn or damaged bearings. Restores proper drum alignment for quieter operation. What it does:

• Supports the inner drum so it spins smoothly and stays aligned
• Reduces grinding, rumbling, squeaking or knocking noises from the drum
• Helps prevent excessive drum wobble that can damage seals or the tub
• Used when worn bearings cause rough rotation, metal-on-metal noise, or visible drum play

• Disconnect power (and water if applicable) before starting any repair
• Replacing this bearing typically requires partial disassembly of the washer/drum assembly and specialty tools
• Inspect shaft/hub, seals, and surrounding components for wear and replace if damaged

Connects the dishwasher door hinge to the tension spring to counterbalance door weight. Replace if cable is frayed, broken, or detached from spring.

Replacement mounting hardware kit for securing dishwasher panels and components. Includes fasteners and clips to restore proper support and stability.

Fix cloudy dishes and hard water spots with this water softener regeneration valve. Restores proper brine flow during recharge cycles for cleaner dishes.

Factory bearing that supports rotating components in your dishwasher. Replace when you hear grinding noise or feel resistance. Verify fit by model number.

This insulating plate serves as the microwave's waveguide cover. It shields the waveguide opening from steam and splatter while allowing energy to enter the cavity, helping prevent arcing and protecting internal components and cavity surfaces.

• Shields the waveguide/magnetron opening from grease and moisture
• Electrically insulates the feed area to reduce arcing
• Helps maintain proper microwave energy distribution into the cavity
• Common signs of failure: sparking from the side wall, burn marks on the cover, sizzling/burning odor during cooking, or a visibly cracked/charred plate

• Disconnect power before servicing; never operate the microwave without this cover installed
• Remove the retaining screw or release tabs, note orientation, and seat the new plate flush over the waveguide opening
• If arcing occurred, clean any carbonized residue from the cavity surface before installing the replacement