We use cookies and similar tools for site analytics and advertising. By using our site, you agree to this. See our Privacy Policy for details. Do Not Sell or Share My Personal Information
Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Fix dishes not cleaning properly with a new dishwasher spray arm. Replaces worn arms with broken jets or wobbly mounts. Simple DIY installation.
I ordered and replaced strategic parts for the dishwasher through your company. The correct parts arrived very quickly and we had much cleaner dishes the next day. Read more
This is a small clip or holder that secures the tine rows in the dishwasher's upper or lower dishrack. It keeps the fold-down tines locked in their upright or flat position so dishes remain stable during the wash cycle. Replace this holder if tine rows are loose, won't stay up, or if the clip is cracked or broken.
Replaced bracket. Read more
The Hinge Lever (RH) is an OEM component specifically designed for Bosch dishwashers. This right-hand lever is a part of the dishwasher door hinge assembly, working to open and close the door during each use. Causes of a bad hinge lever can include wear and fatigue over thousands of opening and closing cycles. Damage can also potentially occur from any impact or denting of the door surface near the lever mechanism. Symptoms of an ineffective hinge lever include:
This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore dishwashers.
Ordered the full hinge piece and an extra bushing. Was able just to slide the dishwasher forward a bit, lift the right side hinge off its seat and pop in the new bushing without disassembling. Fixed! I am retaining the full hinge piece in case of any future door incident but suspect I will never need it Read more
The pump sump seal repair kit contains gaskets and seals that prevent water leaks in the dishwasher's drain pump assembly. Located at the bottom of the dishwasher tub where the pump connects, these seals maintain watertight connections. Replace if you notice water pooling under the dishwasher, reduced drainage performance, or visible water leaks during operation.
Used the Bosch sump pump gasket repair kit Read more
Filters and recirculates water during wash cycles. Replace if you notice poor cleaning, drainage issues, or unusual noises. Verify fit with your model.
Contrary to a great YouTube explaining how to disassemble dishwasher to replace sump, I did not have to completely remove the bottom. I only pulled the bottom frame away from tub at the front enough to snake sump assembly out. I was successful in eliminating sump leak but then the pump/heater connection leaked after reassembling. The dishwasher is 9 years old and the pump port rubber was hardened. I would recommend if the sump is replaced, the pump should also be replaced. Read more
Secures dishwasher hoses to fittings for a leak-resistant seal. Replace if worn or causing drips. Confirm fit with your model number before ordering.
Leak was slow but becoming gradually worse. Pulled dishwasher out from under counter then visually inspected sump while it ran. As soon as the water got very hot, I could see the sump leaking where it meets the stainless pan. Searched for the correct sump gasket without success. Turns out that the gasket is built into the sump for this model. The built-in gasket is very narrow (under-engineered IMHO which is probably why it developed a leak). Thanks to Simon's excellent videos at... Read more
White side trim strips that finish the left and right edges of your dishwasher cutout. Replace cracked, yellowed, or missing trim pieces.
Dishwasher won't start or keeps tripping the breaker? A damaged terminal box with melted connections is often the cause. Moderate DIY repair.
Replaced it with the one you sent. A perfect match which fixed my problem. Thanks very much. Read more
This is the outer decorative facia panel that covers the dishwasher's control area on the front of the door. It provides the finished exterior surface where the control buttons and display are located. Replace this panel if it is scratched, dented, discolored, or if the silver finish has worn away, affecting the appearance of the dishwasher.
Left-hand hinge lever for dishwasher doors. Assists door opening and closing through pivoting motion. Replace if cracked, broken, or damaged from overextension.
I replace the springs first. That wasn't the issue. Then I replaced the hinges. Boom! Problem solved. Read more
This replacement screw secures panels, brackets, and internal parts in your appliance for a tight, rattle-free fit. Use it to replace lost, stripped, or corroded hardware and keep components properly fastened.
I had removed the frame some time ago to deal with a different issue. It turns out there are two types of screws. Apparently, when I replaced the screws, I did so randomly, and some did not quite fit the holes, and fell out and were lost over time. There are longer screws, 022 on your diagram, that fit the UPPER three holes in the dishwasher door frame. The shorter screws, 023 on your diagram, fit the lower three holes on the dishwasher door frame. The screw heads are the same, but the... Read more
Dishrack handle for Bosch dishwashers. Attaches to upper or lower rack for easy loading and unloading. Replace if cracked, broken, or missing.
This inner door panel forms the inside surface of the dishwasher door. It supports key door components and helps seal the tub, keeping water and heat contained for reliable, quiet operation.
AppliancePartsPros exploded views made it easy for me to identify the door and hinge parts that had likely been damaged. Evidently, this happens often enough that they even made a repair video for this exact misfortune. After confirming that the suspected hinge and door parts were indeed damaged, I ordered replacement parts from APP and began fretting about the door being damaged in shipping. Not to worry. Three days later, the parts arrived and the door was packaged in sealed pack foam and... Read more
This is a small roller that mounts on the dish rack track inside a dishwasher, allowing the rack to slide in and out smoothly. It supports the weight of the loaded rack and guides it along the rails. Replace this roller if your dish rack is difficult to pull out, feels wobbly, or if the existing roller is cracked, worn, or missing.
The top and middle racks had broken rollers. Tracks were intact. Went to the website with the Model number. Pulled up drawings. Turns out the rollers are part of assemblies; for the middle rack "Rail-Pull out" left and right (mirror images of each other). Top: "Holder", which is a set of two. Top rack: the Holders just snap on with built-in clips. Easy. about 2 minutes per side. The Middle rack is a little more complicated. There's a spring-loaded clip that you push on, slide the rail... Read more
Replacement outer door panel for dishwashers. Installs on the front exterior. Needed when original is dented, scratched, rusted, or for finish upgrades.
Very smooth. I ordered the door and the control panel. It is helpful to have an extra set of hands when removing the screws from the door or place something under it so it doesn’t drop. The door comes off with about 10 screws. They are different length. Short screws go into steel, long go into plastic. Remove the door and upper facia/control panel. You’ll need to disconnect the wires. The panel has two parts that need to be transferred. 1. The electronic panel. It’s white and has a row of... Read more
Fix a tilted or unstable dishwasher with this leveling leg. Ensures proper drainage and cleaning performance. Easy DIY install in minutes.
We took off the front panel and discovered the previous owner had stacked cardboard under a missing leg. We took the model number, ordered a new leg and front panel. It took just a few minutes to unscrew the washer, move it out, attached the new leg, level and reinstall. Read more