We use cookies and similar tools for site analytics and advertising. By using our site, you agree to this. See our Privacy Policy for details. Do Not Sell or Share My Personal Information
Need Help?
Call
Door pulley rope for dishwasher door latch mechanism. Replace if frayed, broken, or snapped from repeated use. Includes rope and plastic retainer.
I ordered the part - plastic rope holder and cord and replaced the broken one. Read more
Most orders arrive by Wednesday, November 25
Fix a blank display or unresponsive controls with this dishwasher control module. Processes cycle commands and user inputs. Requires T-20 torx driver.
This is a small clip or holder that secures the tine rows in the dishwasher's upper or lower dishrack. It keeps the fold-down tines locked in their upright or flat position so dishes remain stable during the wash cycle. Replace this holder if tine rows are loose, won't stay up, or if the clip is cracked or broken.
Replaced bracket. Read more
Filters and recirculates water during wash cycles. Replace if you notice poor cleaning, drainage issues, or unusual noises. Verify fit with your model.
Contrary to a great YouTube explaining how to disassemble dishwasher to replace sump, I did not have to completely remove the bottom. I only pulled the bottom frame away from tub at the front enough to snake sump assembly out. I was successful in eliminating sump leak but then the pump/heater connection leaked after reassembling. The dishwasher is 9 years old and the pump port rubber was hardened. I would recommend if the sump is replaced, the pump should also be replaced. Read more
Replacement door handle for dishwashers. Installs on the outer door panel. Needed when your existing handle is cracked, broken, loose, or missing.
Replaced the sump, easy repair following the Appliance Parts Pros Youtube video, hose clamp for the pump was actually included with the sump. I wish I ordered the diverter valve gasket as well though. Read more
The pump sump seal repair kit contains gaskets and seals that prevent water leaks in the dishwasher's drain pump assembly. Located at the bottom of the dishwasher tub where the pump connects, these seals maintain watertight connections. Replace if you notice water pooling under the dishwasher, reduced drainage performance, or visible water leaks during operation.
Bought Repair Set for 11 year old Bosch Series 300 Model #SHE53T52UC/01 It fits and it works. If the APP part checker says no as it did for me, fire up the chat and they'll confirm that it is OK. The part works on a huge number of Bosch models and yours can be cross checked on the Bosch website. The seal repair kit arrived the very next day because Appliance Parts Pro shipped from a warehouse closer to me than them. It was made by the OEM. I watched two videos and discovered where the video... Read more
Secures dishwasher hoses to fittings for a leak-resistant seal. Replace if worn or causing drips. Confirm fit with your model number before ordering.
Leak was slow but becoming gradually worse. Pulled dishwasher out from under counter then visually inspected sump while it ran. As soon as the water got very hot, I could see the sump leaking where it meets the stainless pan. Searched for the correct sump gasket without success. Turns out that the gasket is built into the sump for this model. The built-in gasket is very narrow (under-engineered IMHO which is probably why it developed a leak). Thanks to Simon's excellent videos at... Read more
This replacement screw secures panels, brackets, and internal parts in your appliance for a tight, rattle-free fit. Use it to replace lost, stripped, or corroded hardware and keep components properly fastened.
I had removed the frame some time ago to deal with a different issue. It turns out there are two types of screws. Apparently, when I replaced the screws, I did so randomly, and some did not quite fit the holes, and fell out and were lost over time. There are longer screws, 022 on your diagram, that fit the UPPER three holes in the dishwasher door frame. The shorter screws, 023 on your diagram, fit the lower three holes on the dishwasher door frame. The screw heads are the same, but the... Read more
This is a small roller that mounts on the dish rack track inside a dishwasher, allowing the rack to slide in and out smoothly. It supports the weight of the loaded rack and guides it along the rails. Replace this roller if your dish rack is difficult to pull out, feels wobbly, or if the existing roller is cracked, worn, or missing.
The top and middle racks had broken rollers. Tracks were intact. Went to the website with the Model number. Pulled up drawings. Turns out the rollers are part of assemblies; for the middle rack "Rail-Pull out" left and right (mirror images of each other). Top: "Holder", which is a set of two. Top rack: the Holders just snap on with built-in clips. Easy. about 2 minutes per side. The Middle rack is a little more complicated. There's a spring-loaded clip that you push on, slide the rail... Read more
Fix a tilted or unstable dishwasher with this leveling leg. Ensures proper drainage and cleaning performance. Easy DIY install in minutes.
Ordered parts and put them on. Read more
Replacement container for dishwasher interior organization. Installs inside the unit to hold contents. Replace if cracked, leaking, or missing.
Replaced spray arm water track, zeolite container and zeolite fan. This required tilting the entire dishwasher off its based. There is an excellent step by step YouTube video for this. Read more
The Cover is an OEM part for Bosch dishwashers. It serves as a protective barrier over vulnerable inner components. The cover helps prevent damage from spills, shields electronics from moisture, and blocks access to moving parts for safety.
Causes of a bad cover can be normal wear and tear, repeated impact damage, or improper handling during repairs.
Symptoms of a bad cover include:
This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.
I discovered after receiving the error code 24 that my dishwasher had been installed with the back leveling foot on the drain hose which flattened it and also eventually made a slow leak. The hose could get under the foot because not all of the hardwood flooring was installed under the dishwasher (long story). I ordered the replacement hose and found information on the website and online that helped with the removal/Installation process. the hardest part was getting the dishwasher out as the... Read more
This metric M4 x 8 screw secures the toe-kick/lower access panel at the base of the appliance. Replace a missing or stripped fastener to keep the kickplate tight and aligned, helping prevent looseness and noise.
I went on your very user friendly website and looked up my bosch dishwasher. I love your diagrams and I felt confident that I could figure out what we possibly needed to get the door to close correctly and get the washer back working again. Your staff is courteous, service was fast and I would definitely recommend Appliance Parts Pros. Read more
Replacement cup rack for dishwashers. Installs inside the tub to hold cups and mugs during wash cycles. Replace if prongs are broken or plastic is cracked.
I researched the model number & discovered appliance pros on the Brilliant Distinctions (Botox) website. The website is user friendly & I entered the model #, and was directed to a diagram that showed the exact part & reference number. I ordered the parts, and received them via Fed Ex. Very easy! I'll be back when I need additional replacement parts. Read more
Lower rack wheel for Bosch dishwashers. Guides the bottom rack smoothly in and out. Replace if cracked, broken, or worn for proper rack operation.
Fix touch controls that don't respond or lights that flicker. This wire harness connects power and signals throughout your dishwasher. Moderate DIY repair.
I replaced the controller, the thin seal @ the top and the cable in the door and has seemed to resolve the issue. I removed the three screws that were in the upper part of the door handle slot and took out the inner panel screws on the door. No need to take the screws for the hinges out. The door will spring shut once you take the inner panel off so be careful. You'll need a Torx screwdriver Read more