Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
The Base Panel is an OEM part for Bosch dishwashers. It forms the floor structure inside the dishwasher tub on which racks and components sit. Symptoms of a problematic base panel include:
Causes generally relate to the base panel's location low in the tub being subjected to concentrated mechanical and environmental stresses cycle after cycle. Failure to replace it risks jeopardizing dish rack stability along with bigger repair costs down the line from unchecked water leaks. This OEM Bosch part can also be used on Thermador and Gaggenau appliances.
The parts were to complete the install. Not a repair really. Although this was my first dishwasher install DIY. and thanks to the very fast and accurate parts delivery I was able to get everything done right the first time. Read more
The Hinge Bushing is an OEM component for Bosch dishwasher models. This bushing acts as a guide and support component for the dishwasher door hinge assembly. It facilitates smooth and quiet opening and closing of the door.
Symptoms of a bad hinge bushing include:
Causes of a bad hinge bushing can be normal wear and tear over the life of the appliance. Small metal particles embedded in the bushing material during manufacturing may also cause premature wear.
This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.
Checked out the AppliancePartsPros.com online parts/assembly diagrams for our Bosch dishwasher model and ordered the two sided set of new springs + connector ropes + connector-to-door ... plus a couple of other relatively inexpensive adjoining parts that might have become worn over time, just in case they were needed. The extra parts arrived in two days with standard shipping. Called about the "back ordered" primary set of parts (which had been listed as being "in stock" when I placed the... Read more
The Tine Row Holder is an OEM replacement part for Bosch dishwashers. Located inside the upper basket, it securely holds a row of retractable spray arm tines in place.
Causes of a faulty tine row holder can include cracks or breaks in the plastic from repeated folding and unfolding of the tines over time.
Symptoms of a bad tine row holder include:
This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore dishwashers.
Replaced all of the movable tines with new ones. Purchased all new plastic parts as I thought these would break when I removed them. This did not happen so I now have the plastic clips left over. Read more
The Pump to Heater Hose Clamp is an OEM part for Bosch dishwashers. This clamp secures the hose that connects the pump to the heater, ensuring a tight and leak-free connection. It plays a crucial role in maintaining the integrity of the water flow within the dishwasher, preventing leaks and ensuring efficient operation.
Causes of a bad hose clamp can include wear and tear over time, loosening due to vibrations, or damage from repeated tightening and loosening. A faulty clamp can lead to water leaks, which can cause further damage to the dishwasher.
Symptoms of a bad pump to heater hose clamp include:
On my Bosch she55m15uc/64, the cycle would take 3-4 hours, with the machine stuck on "1 minute" for a long time. The interior was getting moldy and smelly, and the dishes had a white film. At first, I thought it was the heater relay on the control board, but I pulled that relay and it seemed to be working. I could get an ohmmeter on the heater element without taking the bottom off the dishwasher, and the resistance was infinite. Replacing the heater did the trick. On my unit there was a... Read more
The Rack Flip Tine Clip is an OEM part for Bosch dishwashers.Its c-shaped design allows the flip tines to securely grip onto rolled edges of folding tines situated along inner walls of the dishrack. The clip maintains constant contact holding the rack firmly against potential movement.Used for the lower rack to hold one end of two flip tines. The tine clip measures just over an inch.
Causes of clip failure include breakage from repeated folding stresses or flexing over extended use. Material fatigue from long-term exposure to elevated temperatures in the wash chamber can also lead to cracking.
Symptoms of a failed rack flip tine clip include:
This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.
Easily installed the side mounts and put new trim around the opening. Read more
The On/Off Switch is an OEM part for Bosch dishwashers. This switch controls the power to the dishwasher, allowing the user to turn the appliance on and off. It is typically located on the control panel and is essential for initiating and halting the wash cycles.
Causes of a bad On/Off switch can include wear and tear from regular use, electrical malfunctions, or physical damage such as cracks or breaks. When the switch fails, it can prevent the dishwasher from powering on or off correctly, disrupting the appliance's functionality.
Symptoms of a bad On/Off switch include:
I bought a new power switch and replaced the old switch. Read more
The Screw Kit (Inner Door) is an OEM part for Bosch dishwashers. It is a comprehensive kit that includes 6 screws required for securing and maintaining the inner door assembly of the dishwasher.
Symptoms of needing a new screw kit:
Causes of a bad screw kit can include missing or stripped screws, corrosion or wear over time, or damage during repair or maintenance work.
This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore dishwasher models.
Repair estimate was $250 parts, $250 labor to change out the circulating pump. I decided to do it myself. Pump was $166 from AppliancePartsPros. It arrived in 4 days. I looked at the video on their website, followed the instructions step by step and did it myself. They estimated 45 minutes. It took 2 hours.There are always minor differences so always take photos of yours. Suggest that you bag up all screws and pieces from each part as you take them off and label the bag. I had 12 bags with 2 to... Read more
The 4 x 16 Screw is an OEM component for Bosch dishwashers.
Common causes of faulty screws include standard wear from years of housing vibrations during wash cycles. Mineral deposits lingering around screw heads also risk eventual corrosion and seizing issues.
Symptoms of potentially loose or damaged screws comprise:
This screw type is additionally suited for Thermador, Gaggenau as well as some premium Kenmore dishwashers.
Ordered replacement parts from AP diagram Read more
The Float Switch is an OEM replacement part specific to Bosch dishwashers. It is a switch located in the sump area of the dishwasher tub that detects water levels and provides feedback for automatic filling and draining functions. Symptoms of a bad float switch include:
Causes of a bad float switch are usually mineral or sediment buildup disrupting its buoyancy and sensing ability. Without a properly functioning float switch, the dishwasher cannot effectively monitor water levels to manage filling and drainage. This OEM Bosch replacement switch is also compatible with Thermador, Gaggenau, and some Kenmore dishwasher models.
I checked continuity at the float switch since I knew the inlet valve was working when direct wired to 120v. Switch did not have continuity. Replaced switch and inlet valve worked at start of cycle. Read more
The Turbidity Sensor is an OEM part for Bosch dishwashers. It is a component located inside the dishwasher that plays a key role in monitoring water quality during each wash cycle. The turbidity sensor detects small food particles and residue in the water, relaying this information to adjust water temperatures, spray pressures, and cycle times accordingly to achieve optimal cleaning results. Causes of failure could be normal wear and tear over time, mineral buildup affecting the sensor's ability to read water quality accurately, or damage from electrical faults. Symptoms of a bad turbidity sensor include:
Ordered and replaced sump pump, backflow preventer valve and turbidity sensor on Bosch dishwasher. The latter two parts were recommended when ordering the sump pump and did need replacing. The videos showing how to remove and replace each part are great. The project went well and the dishwasher is fixed for less than 1/4 of what it would cost to get a repairman out here. In all fairness we do live in a remote location and do not have any local appliance repairmen. This is the third project I... Read more
The Upper Dishrack Assembly is an OEM replacement part for Bosch dishwashers. Causes of a bad assembly include cracked or broken rack modules from years of abusive slamming during loading. Mineral buildup may also lead to jammed or stuck tines no longer gliding freely between positions. Symptoms of a bad Upper Dishrack include:
Compatible with Thermador, Gaggenau and certain Kenmore models.
We ordered new top & bottom trays. The dishwasher is 5 years old, so we needed to decide put cost of new trays or replace unit. We are trying to be "green" and not throw away people. So we shopped the internet. We are so glad and happy that we found AppliancePartsPros. The price was good but the service and speed of us getting the parts was exceptional. Can't say enough from the helpful and knowledgeable agent to the speedy shipping. Will use again next time parts are needed. Read more
The Drain Hose is an OEM replacement part for Bosch dishwashers. It is responsible for draining water from the dishwasher tub at the end of each cycle.
Causes of a bad drain hose can include cracks or ruptures developing over time due to repeated drainage and high temperatures, or blockages obstructing flow.
Symptoms of a faulty drain hose include:
Once the problem had been identified, I ordered a new drain hose from Appliance Part Pros. I received exactly the part I needed, and it was easy to replace the damaged hose with the new one. Read more
The Base Panel is an OEM part for Bosch dishwashers. It serves as a protective cover for the bottom of the dishwasher, shielding internal components from debris, moisture, and damage while also contributing to the appliance's structural stability.
Causes of a bad base panel can include physical damage from impacts, corrosion due to prolonged exposure to moisture, or general wear and tear over time. A compromised base panel can lead to further issues by allowing dirt and water to infiltrate sensitive components.
Symptoms of a bad Base Panel include:
The How-to videos on YouTube from appliance parts pros are very easy to follow. Read more
The Power Cord is an OEM replacement part for Bosch dishwashers. It supplies electrical current that allows the dishwasher to properly perform cycles. Located at the rear of the appliance, it plugs into a standard three-prong outlet. Causes for power cord replacement include cracking, splitting, or breaks in the protective insulation over time from repeated bending and stress. Symptoms of a faulty power cord include:
A part was missing from a dishwasher purchased from a company that was going out of business. When the electrician tried to install it, he found that it was missing a critical, proprietary part that connected the power to the unit. The part did not appear on any diagrams provided with the machine. I contacted Appliance Parts Pros. They found an obscure diagram that showed the part, identified the part, and tracked it down for me. The part was priced reasonably and shipped quickly. Highly... Read more
The Lower Spray Arm is an OEM part for Bosch dishwashers. It is responsible for delivering water directly under the lower rack of the dishwasher for targeted cleaning of pots, pans, and other utensils. The lower spray arm directs a powerful spray of water while rotating rapidly during the wash cycle spraying water against all interior surfaces.
Symptoms of a bad lower spray arm include:
Causes of a bad lower spray arm can include mineral deposits or contaminants clogging the nozzle openings, worn out or damaged spray jets, or damage to the arm itself preventing proper rotation.
I only needed a flat head screwdriver to remove the clips holding the parts in. It took all of 10 minutes and the dish washer is running great now. Read more
The Mounting Bracket Set is an OEM replacement part for Bosch dishwashers. Comprised of heavy-duty brackets and mounting fasteners, this set securely anchors the dishwasher to surrounding cabinetry. Causes involve normal stress and fatigue of mounting points from years of use, and cycles of expansion and contraction. Symptoms of faulty or damaged mounting brackets include:
This OEM Bosch replacement set is also compatible with Thermador, Gaggenau, and some Kenmore dishwashers.
The Bosch dishwasher mounting bracket set includes both left and right-hand brackets used for side or top mounting.