Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Cable harness for dishwasher base wiring system. Connects pump, controls, and electrical components. Replace if damaged by rodents or frayed wires.
Wire harness replaced Read more
The Sealing is an OEM part for Bosch dishwashers. It serves as a protective barrier between the control panel and the internal components of the dishwasher, preventing moisture and dust from entering and causing damage.
A bad sealing can occur due to wear and tear, exposure to moisture, or accidental damage. Signs of a faulty sealing include water seeping into the control panel, visible cracks or gaps, or a loose fit.
Symptoms of a bad sealing include:
Replace your damaged or worn-out sealing with this genuine OEM Bosch part to restore your dishwasher. This Bosch part can also be used on Thermador and Gaggenau appliances.
I replaced the controller, the thin seal @ the top and the cable in the door and has seemed to resolve the issue. I removed the three screws that were in the upper part of the door handle slot and took out the inner panel screws on the door. No need to take the screws for the hinges out. The door will spring shut once you take the inner panel off so be careful. You'll need a Torx screwdriver Read more
Fix a dishwasher that won't power on or reset with this on/off switch. Replaces worn or moisture-damaged switches. DIY-friendly installation.
Initially performed troubleshooting over the phone with Bosch customer support and did preliminary research on the web. Ultimately had to call out service technician to isolate/confirm problem. He confirmed the problem was most likely the switch (if not, the actually computer processor) and gave me the part number (since it was going to take 10 BD's for him to get the part). I ordered through Appliance Parts Pros and received the part in only 2 days. However, upon trying to install it, I... Read more
Adjustable leveling foot stabilizes your dishwasher on uneven floors. Replace if cracked, worn, or missing. Installs at base corners for proper alignment.
The parts were to complete the install. Not a repair really. Although this was my first dishwasher install DIY. and thanks to the very fast and accurate parts delivery I was able to get everything done right the first time. Read more
Traps food particles and debris during wash cycles to keep water clean. Replace if clogged with buildup or if plastic retainer fails. Verify fit by model.
The wash arms and filters were plugged with calcium and no longer spraying. Needless to say this impacts cleaning. The replacement parts were top quality and fit perfect. This simple replacement of parts put new life in trusty Bosch. Read more
Mounting screw that secures the toe kick panel to the bottom frame of your dishwasher. Replace if screw is lost, stripped, or damaged during installation.
My order arrived very fast and was easy to install. Read more
Replaces sliding rails that support and guide the upper dishrack along tub sidewalls. Needed when rails are cracked, worn, or broken causing binding.
I only needed a flat head screwdriver to remove the clips holding the parts in. It took all of 10 minutes and the dish washer is running great now. Read more
Seals the detergent dispenser to prevent leaks and ensure proper release during wash cycles. Replace if detergent leaks or dispenser malfunctions.
Replaced dispenser. It was hard to snap into place. You don't need to order separate gasket it comes with it. Read more
Hose, with o - ring, shu (uc/12 & above)
This Sump to Float Hose is an OEM part for Bosch Dishwashers. It functions to carry water from the dishwasher sump to the float assembly. Continuous water flow and exposure to detergents can lead to wear or damage over time.
What Causes a Bad Sump to Float Hose: Exposure to chemicals and hot water, along with wear from water flow, can cause the hose to degrade or develop cracks.
Symptoms of a Bad Sump to Float Hose:
This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.
Used vids on youtube for steps on how to disassemble and install the pump; search "Bosch dishwasher circulation pump replacement". Also on AppliancePartsPro forums, a poster put up the Bosch "Dishwasher Service Training Manual" in .pdf. Search "Bosch dishwasher low pressure" on the forum. It's one of the post with the longest thread. Six pointers. 1. In another forum post, the poster noted that some hoses were brittle with age - and cracked when reinstalling. I had same issue (my washer is... Read more
Dishwasher won't start or keeps tripping the breaker? A damaged terminal box with melted connections is often the cause. Moderate DIY repair.
Replaced it with the one you sent. A perfect match which fixed my problem. Thanks very much. Read more
Wire harness for dishwashers. Connects electrical components throughout the appliance frame. Replace if wires are frayed, damaged, or disconnected.
Replacement water hose for dishwashers. Channels water between internal assemblies. Replace if cracked, brittle, leaking, or damaged to prevent leaks.
Fix a dishwasher that won't drain with this drain pump replacement. DIY-friendly repair takes 30-60 minutes. Includes step-by-step video guide.
We watched several videos on our Bosch dishwasher, and how to repair it. Then went to AppliancePartsPros.com, found the parts we needed, and watched their repair video. It took around 30 to 40 minutes to fix with the help of the video, thank you! Read more
The Hinge Lever (RH) is an OEM component specifically designed for Bosch dishwashers. This right-hand lever is a part of the dishwasher door hinge assembly, working to open and close the door during each use. Causes of a bad hinge lever can include wear and fatigue over thousands of opening and closing cycles. Damage can also potentially occur from any impact or denting of the door surface near the lever mechanism. Symptoms of an ineffective hinge lever include:
This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore dishwashers.
Ordered the full hinge piece and an extra bushing. Was able just to slide the dishwasher forward a bit, lift the right side hinge off its seat and pop in the new bushing without disassembling. Fixed! I am retaining the full hinge piece in case of any future door incident but suspect I will never need it Read more
Seals the sump area to prevent leaks and ensure proper water circulation and drainage. Replace if cracked, warped, or missing. Verify fit with your model.
I searched for the problem online and found the video. It was direct and straightforward, so I just bought the parts without shopping elsewhere. . I replaced the Lid and Cover (which was missing) in the drain assembly and it’s back to normal Read more
The Sealing is an OEM replacement part for Bosch brand dishwashers. Located on the perimeter of the small rinse aid compartment door, this resilient rubber piece forms an essential water-tight seal when the dispenser is closed.
Symptoms of a potentially problematic rinse aid door sealing include:
Causes of a faulty rinse aid door sealing can be repetitive opening/closing stress breaking down pliability long-term. Exposure to chemical vapors from the rinse aid may also degrade sealing properties.
This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.
Ordered new door and seal. They arrived in just a few days. Watched the video on this site. Snapped out the old door and snapped in the new door in about 15 seconds Read more