Shx9pt75uc Parts

The Spray Head is an OEM replacement part for Bosch dishwashers. It directs pressurized water along the dish racks, targeting every inch of dishware and cookware. Consistent coverage cleans thoroughly without waste.   

Symptoms of a bad spray head can include clogged nozzles, inconsistent patterns, or spray heads that do not oscillate and rotate properly through cycles. Mineral deposits pose blockage risks over time.

Causes of a bad spray head include:

• Uneven or skipped areas of spray coverage inside the machine
• Rotating/oscillating mechanisms that jam or continuously stick  
• Nozzles fully or partially blocked reducing water pressure
• Head assembly detaching from water tub wall or bracket

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This genuine water inlet routes household water into the appliance's fill system, helping ensure consistent water delivery and a secure, leak-resistant connection. Replacing a worn or damaged inlet restores proper filling performance and helps prevent leaks at the entry point. What it does:

• Connects the supply line to the unit and directs water into the fill system
• Helps maintain a watertight seal at the water entry connection
• Supports proper fill by working with the appliance's control and fill components
• Common symptoms: no or slow fill, dripping/leak at the inlet connection, visible cracks or mineral buildup on the fitting

• 1 water inlet

• Disconnect power and turn off the water supply before servicing
• Place a towel or pan to catch residual water when removing the old part
• Note the orientation; reinstall existing seals/clips in their original positions if applicable
• Tighten fittings snugly without overtightening; restore water and check for leaks before use

This repair set renews the hinge pivot components so the door opens smoothly and closes squarely. Replacing the worn hardware helps maintain proper alignment and a tight gasket seal for consistent performance. What it does:

• Replaces worn hinge pin/bushing hardware to restore door support
• Helps fix a door that sags, scrapes, or won't close flush
• Can reduce clicking, squeaking, or grinding at the hinge
• Helps the door seal make full contact to prevent warm air leaks

• 1 repair set

• Disconnect power; if applicable, turn off the water supply
• Remove items from the door; support the door and lift it off the hinge
• Install the new hinge hardware in the original orientation
• Reinstall and align the door; verify gasket seal and adjust leveling if needed

This factory replacement spring restores the correct return force in the original mechanism so parts move, hold, and release as designed—bringing back smooth, reliable operation and preventing premature wear on related components.

• Provides controlled tension/return force within the intended assembly
• A weak, stretched, or broken spring can cause sticking, weak action, or failure to hold/release
• Replace if the original is deformed, missing, corroded, or broken
• Designed to fit and function like the original for consistent performance

• Disconnect power (and shut off water supply if applicable) before service
• Springs can release suddenly—use eye protection and needle-nose pliers
• Photograph the original routing/orientation before removal to match placement
• Access points and procedures vary by model; refer to the service manual

Fixing kit supplies the replacement mounting hardware needed to secure appliance panels and components during repairs. It restores proper support to reduce vibration, rattling and misalignment for a stable, quiet installation. What it does:

• Provides the mounting fasteners and clips that hold panels, trim or internal brackets in place.
• Replaces missing or damaged hardware that can cause loose or rattling panels.
• Restores proper alignment to help eliminate noise and improve fit between parts.
• Used when securing components during reassembly after repair or service.

• Disconnect power (and water if applicable) before beginning any repair.
• Retain and compare new hardware to original parts to ensure correct fit before installation.
• Hand-start screws and fasteners, then tighten securely—do not overtighten to avoid stripping.

The Levelling Foot is an OEM replacement part designed specifically for Bosch dishwashers. It works to properly position and stabilize the appliance for balanced and smooth operation. Causes of a bad levelling leg/foot can include general wear and tear over time. 

Symptoms of a bad levelling foot include: 

• An unbalanced or unstable dishwasher during use
• Rocking or shifting of the unit on an uneven surface 

This genuine OEM Bosch part restores proper alignment and support of the dishwasher to ensure optimal performance and noise reduction. This Bosch part can also be used on Thermador and Gaggenau appliances.

This factory bearing supports a rotating component inside your appliance, reducing friction so it turns smoothly and quietly. Replacing a worn bearing helps restore proper motion and can reduce noise and wear in the related assembly. What it does:

• Provides low-friction support for a rotating shaft or arm
• Helps maintain smooth, aligned rotation
• Common wear signs: grinding/squealing noises, wobble or excess play, rough/sticking rotation, or visible damage
• A failed bearing can accelerate wear on connected parts

• 1 bearing

• Disconnect power; shut off water or gas before servicing
• Note orientation and any spacers/clips before removal; transfer in the same order
• Inspect mating seals, clips, or shafts and replace if worn
• Do not lubricate unless specified by the manufacturer; keep contact surfaces clean

The Indicator Light is an OEM part for Bosch dishwashers. It serves as a visual cue, providing important status updates and notifications related to the dishwasher's operation.

Causes of a malfunctioning Indicator Light can stem from issues with the control board or wiring harness that powers the light, or the light itself burning out due to age or electrical surges.

Symptoms of a bad Indicator Light include:

• The light not illuminating at all, even when it should be on
• Flickering or dimming of the light during operation
• The wrong indicator light turning on or staying on inappropriately

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This insulating plate serves as the microwave's waveguide cover. It shields the waveguide opening from steam and splatter while allowing energy to enter the cavity, helping prevent arcing and protecting internal components and cavity surfaces.

• Shields the waveguide/magnetron opening from grease and moisture
• Electrically insulates the feed area to reduce arcing
• Helps maintain proper microwave energy distribution into the cavity
• Common signs of failure: sparking from the side wall, burn marks on the cover, sizzling/burning odor during cooking, or a visibly cracked/charred plate

• Disconnect power before servicing; never operate the microwave without this cover installed
• Remove the retaining screw or release tabs, note orientation, and seat the new plate flush over the waveguide opening
• If arcing occurred, clean any carbonized residue from the cavity surface before installing the replacement

This replacement foot is the leveling support at the base of your appliance. It helps set the height and keep the unit stable and level, reducing wobble, vibration, and noise for smoother, quieter operation.

• Supports the appliance base and provides solid floor contact
• Allows height/leveling adjustment as designed by the unit
• Helps correct rocking, vibration, walking, or door misalignment caused by an unlevel appliance
• Replace if the foot is cracked, missing, worn, or stripped and won't hold adjustment

• Disconnect power; shut off water supply if applicable
• Protect flooring and have a helper steady or move the unit
• Remove the damaged foot; install the new foot per the mounting style (threaded or push-in)
• Adjust height to level the cabinet and stability at all corners

This micro filter is a fine-mesh replacement filter that traps food particles and debris in the dishwasher sump, helping maintain wash performance and protect the pump and drain from clogs. What it does:

• Captures small food particles to prevent recirculation and reduce spotting
• Helps keep the dishwasher drain and pump from clogging
• Supports consistent water flow for better cleaning results
• Can reduce odors caused by trapped debris in the filter area

• Disconnect power and turn off water supply before servicing
• Remove the lower rack to access the sump area; follow your owner's manual for filter removal
• Ensure the filter is properly seated and locked before running a cycle
• Clean surrounding areas and inspect for additional debris while replacing the filter

The Fine Filter is an OEM part for Bosch dishwashers. It is designed to trap small food particles and debris before they can clog other areas of the dishwasher.

The fine filter is positioned inside the dishwasher tub and spray arms to act as a preliminary filter. It helps keep the wash and rinse zones free of obstructions to allow for the best cleaning performance.

Causes of a faulty fine filter are normal product usage over time, accumulation of stubborn food or mineral deposits, and occasional damage from sharp dish edges

Symptoms of a bad fine filter include:
Buildup of muck or grime that cannot be cleaned
Torn or damaged mesh that no longer traps particles
Improper drainage or water not circulating as it should
This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

The Power Supply Unit is an OEM part for Bosch dishwashers. This part is responsible for supplying the necessary power to your dishwasher. It delivers reliable and consistent power to all the electrical parts of your dishwasher.  

A bad power supply unit can occur due to electrical faults, power surges, or normal wear and tear over time. Signs of a faulty power supply unit include the dishwasher not turning on, intermittent power loss, or electrical issues within the dishwasher.

Symptoms of a bad power supply unit include:

• The dishwasher not turning on 
• Intermittent power loss  
• Flickering lights  

Replace your faulty dishwasher power supply unit with this genuine OEM Bosch part to restore your dishwasher. This Bosch part can also be used on Thermador and Gaggenau appliances.
 

This repair set is a small service kit for Bosch appliances that replaces worn service parts to restore normal operation and stop minor leaks or performance issues. It's a compact, technician-friendly kit for quick component swaps. What it does

• Replaces small service components and seals that can wear over time
• Helps stop minor leaks commonly caused by deteriorated gaskets or O-rings
• Can reduce noise or vibration linked to loose or damaged small parts
• Restores proper sealing and mechanical fit where original small components have failed

• One repair set

• Recommended for technicians or experienced DIYers; inspect surrounding parts for related wear
• Turn off and unplug the appliance and shut off water supply before starting work
• Use basic hand tools; avoid over-tightening fasteners to prevent damage

The Dishwasher Hinge Lever is an OEM replacement part for Bosch dishwashers. This hinge lever is crucial for the operation of the dishwasher door, supporting smooth movement as it opens and closes. It works alongside the door springs to provide balanced tension, ensuring that the door stays securely in place when opened or closed. 

Over time, hinge levers may wear out due to regular use, strain from overloading the door, or corrosion from prolonged exposure to moisture. A damaged hinge lever can disrupt the door’s movement, leading to issues with opening, closing, or improper sealing of the dishwasher door.

Symptoms of a bad Dishwasher Hinge Lever include:

• Difficulty opening or closing the dishwasher door
• The door dropping open without resistance
• A loose or sagging door that won’t stay securely in place
• Unusual noises when moving the door 

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

Replacement door hinge that restores proper door alignment and smooth opening/closing for compatible Bosch appliances. Simple, direct support for the door pivot to reduce sagging, uneven closing, and noisy operation. What it does:

• Supports the appliance door pivot and maintains correct door alignment during use.
• Helps stop door sagging, uneven gaps, and doors that don't close or latch reliably.
• Restores smooth opening and closing and reduces hinge-related noise.
• Works as the mechanical pivot/connection between the door and cabinet frame.

• Turn off power and disconnect the appliance (and water supply if applicable) before starting any repair.
• Support the door while removing/installing the hinge to prevent damage or injury.
• Use the original mounting hardware or manufacturer-recommended fasteners; tighten securely but avoid overtightening.
• After installation, check door alignment and operation; adjust as needed per manufacturer instructions.