Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Compressor clicks on and off or won't start? This PTC start relay energizes the compressor start winding to restore consistent cooling. DIY-friendly repair.
I bought this relay switch and it works great. On the left side of the compressor there is a plastic cover you pry off with a screw driver. The relay switch had one wire plug on it. Just pull the wire off and the pull the relay switch off the compressor. Read more
Rubber grommet that mounts the evaporator or condenser fan motor to its bracket. Replace when worn, cracked, or missing to reduce vibration and noise.
Condenser fan stopped on my big 2003 Monogram 4 foot wide ZIS480D Refrigerator. It is top mounted. The fridge had to be rolled out. 20 screws removed and the top sheet metal to get at the condenser. That was the only way to get at it. Works like new now. Read more
Fridge not cooling or excessive frost buildup? A faulty defrost timer may be cycling incorrectly. Straightforward DIY replacement restores automatic defrost.
After replacing both defrost thermo's, defrost control and temp sensor I replaced the defrost heater. fridge has not had an issue since, been only a few weeks though. hopefully this solves the issue. GE model #-GTS22JBPBRWW Read more
Refrigerator not cooling or compressor clicking on and off? This compressor kit restores cooling. Requires certified technician with specialty tools.
Magnetic door gasket that seals the fresh food compartment to maintain temperature and prevent frost buildup. Replace if torn, cracked, or failing the paper test. Verify fit with your model number.
I ordered a new gasket seal and repaired the fridge and it works great now. Read more
Reversible door plug fills unused mounting holes when switching refrigerator door swing direction. Replaces broken or missing plugs for a finished look.
Replacement mounting screw for refrigerator panels, brackets, door handles, and trim. Needed when original hardware is missing, stripped, or corroded.
Secures water lines and wiring inside your refrigerator to prevent vibration, rubbing damage, and leaks. Replace if broken or missing. Confirm fit.
I replaced all the parts on the back of the refrigerator (tube from valve, water fill assembly, and tube clamp). There is a secondary water fill tube inside the freezer which comes loose when you take the fill assembly off. It fell into the cabinet and I had to remove the ice maker to ensure I got it back on correctly, took an extra five or less minutes. Read more
Refrigerator clicking but not cooling? A failed overload protector can prevent compressor startup. This part interrupts power during overheating.
Replace this freezer door gasket when you notice frost buildup, warm spots, or the door won't seal tightly. Creates an airtight magnetic seal. Verify fit.
Ice maker not filling or water spilling? This fill cup directs water into the ice maker mold for proper ice production. Simple clip-on install.
Went online to appliance pro, found my model and the ice maker part number. The process was very easily. The order process was also very simple and the part was delivered promptly with installation instructions. Read more
Replacement mounting screw for refrigerator panels, brackets, and hardware. Restores secure fit when original is missing, stripped, or corroded.
Hinge missing screws. Replaced 2. Perfect now Read more
Secures the evaporator fan assembly behind the rear freezer panel. Replace if cracked, rusted, or missing to restore proper fan mounting and clearance.
The problem was most likely the evaporator fan motor but it could have been a bad blade, loose parts or bad motor mounts. Hard to tell without taking everything apart and inspecting. Since fridge was 17 years old I decided to order the entire evaporator fan assembly as shown in the parts diagram including fan blade, motor brackets, motor, motor mounts, screws, etc. Getting to the assembly involved removing the ice maker unit plus the entire rear inside of the freezer section. Parts cost around... Read more
Cushions where the washer lid meets the top panel to soften closure and protect the finish. Replace worn, cracked, or missing bumpers to reduce noise.
Fridge won't cool or runs constantly? This temperature control thermostat senses compartment temp and cycles the compressor. Moderate DIY repair.
Replaced the thermostat. Read more
Secures the condenser fan motor in position. Replace this bracket if cracked, bent, or causing excessive vibration to restore stable mounting.