Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
This is a grommet and gasket assembly that seals the ice maker water fill tube where it passes through the freezer wall. It prevents warm air from entering the freezer compartment and stops moisture from building up around the fill tube opening. Replace this assembly if you notice frost or ice buildup around the fill tube entry point, water leaking near the ice maker, or if the existing grommet is cracked or deteriorated.
Replaced water line from valve to ice maker Read more
Rear mounting bracket that secures the evaporator fan in your refrigerator. Replace if bracket is cracked, bent, or broken, causing fan misalignment.
WE REPLACED THE FAN MOTOR, FAN, MOUNTING BRACKETS, AND GROMMETS. Read more
Fixes warm fridge with cold freezer caused by frosted evaporator coils. This defrost thermostat regulates defrost cycles. Moderate DIY repair, 1-2 hours.
Well at first I thought the defroster element was the problem,so I was removing it to ohm it out and it broke upon removal.After replacing the element I was hoping that was the problem...After a week or so started having same problem with evap. freezing over.So I came back to your site to research what else could be the problem,and low and behold found an article about the defroster thermostat and a video on how to replace it.Ordered the thermostat and it was here within 2 days,replaced the... Read more
Refrigerator not cooling but freezer works? A failed evaporator fan motor stops cold air circulation. DIY-friendly repair with basic tools in 30-60 minutes.
1. Unplug the power, 2. Removed the shelving and Ice maker including power cord, 3. Removed the air flow conduits, 4. Removed the back panel, 5. Removed evaporator fan housing and drop down then un clip power supply and remove evaporator fan housing and all and set on a flat surface, 6. Remove the upper bracket holding in evaporator and remove evaporator fan ( be sure to remove the fan blade you'll need it for the new motor ) 7. Popped out the old grommets ( I replaced both since I was there )... Read more
Assembly screw kit for refrigerators. Secures handles, shelf tracks, door hinges, and interior panels. Replace missing, stripped, or lost screws.
Replaced handles Read more
Refrigerator light not working? This light bulb socket holds the bulb securely and provides electrical connection. Easy DIY repair with video guide.
Had some confusion of what part I needed, needed the one with the motor and thermostat. Fortunately, I've been fixing wiring for many years, I simply cut the new motor out of the harness, and used that nice glue-inside-heat-shrink tubing to seal the soldered 'Western Union' style splices. New light socket and lamps fit fine, worked fine, new motor is fine, problem resolved. FYI: Look closely at the wiring in you unit, there are two wire harnesses, one feeds the light, the other feeds the motor... Read more
Slide track for refrigerator snack pan or deli drawer. Replace if cracked, broken, or worn from regular use. Ensures smooth drawer operation.
Ordered it and replaced it. Read more
Left side slide rail for refrigerator snack pan or crisper drawer. Replace if broken, cracked, or damaged to restore smooth drawer operation. Sold individually.
Our contractor replaced the Snack Pan Slide and fixed it. Read more
This evaporator fan motor dust cap is an authentic OEM replacement part found on refrigerator and freezer fan motors. This dust cap prevents the fan motor bearing and housing from being damaged by dirt and debris. If the dust cap is cracked or broken, the fan may make loud squealing noises. If the dust cap is not removed and replaced, the fan could stop working and ultimately cause the refrigerator's temperature to be affected. To start, disconnect the power and water to the refrigerator. Remove food from the freezer so that the back panel of the freezer can be accessed to reach the fan. Remove the ice maker and set it outside the freezer. Disconnect the fan and take it out of the freezer to expose the fan's shaft and the dust cover. Pry the dust cover off and install the new one. Replace the fan and cover. Reconnect the wires and reinstall the icemaker. Put the food back in the freezer. Reconnect the power and water.The evaporator fan motor dust cap is a white plastic part that is sold individually. This dust cover is made for use in refrigerators manufactured by General Electric, Hotpoint, and Kenmore.
Replacement of the evaporator fan motor, fan blade, and grommets. The amount of disassembly to reach the part took most of the effort Read more
Replacement trim piece for refrigerator door shelves. Secures bottles and jars on the door. Replace if cracked, broken, or worn for a clean appearance.
I efficiently found replacement parts on AppliancePartsPros.com and rectified the issues with my 20 year old appliance. Read more
The Freezer Shelf is an OEM replacement part for GE freezers. This shelf provides storage throughout the freezer compartment. It measures approximately. 25" x 12". Causes of a bad freezer shelf can include cracked or broken steel from overloading, corrosion from moisture exposure over years of use, or damage from impact. Symptoms of a faulty shelf include:
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Ordered a replacement shelf. Now my freezer is longer an open pit. I love being able to organize! Read more
Wire shelf for refrigerator fresh food section. Provides stable storage surface for organizing food items. Replace if cracked, broken, or missing.
I found AppliancePartsPros.com while surfing the web and made my call; knowing nothing about the site or company. In a nutshell, I do not know if the price I paid for the item was competitive, but the representative I spoke to was extremely knowledgeable; helped me locate the part I needed immediately; and completed the entire transaction in which seemed like 60 seconds. The part arrived 2 days later and was EXACTLY what I needed and a PERFECT match to the other shelves in my refrigerator... Read more
Secures brackets, panels, trim, and covers inside your refrigerator. Replace this screw if stripped, missing, or damaged to restore tight assembly.
Got the part from you in record time. Had it on 5 minutes, the world is back to normal. Thks Read more
Replacement meat pan drawer for the fresh food section. Restores organized storage when original is cracked, broken, or missing. Slides into shelf rails.
I purchased, with trepidation, a new meat pan... Thinking, no way it will fit... But was overjoyed when it was the exact size to replace the broken drawer. Read more
Replacement door shelf bar for refrigerator fresh food compartment. Secures bottles, jars, and condiments on door storage. Order when broken or cracked.
I ran across AppliancePartsPros.com online and put in my model number and that got me started Read more
Replacement door shelf bar for refrigerator fresh food compartment. Snaps into place to form the front rail that keeps bottles and jars secure. Replace broken, cracked, or missing bars.
No story :). 5 seconds out of the box, 5 seconds snap into place. Perfect fit. Thank you! Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.