Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Fix excessive frost buildup in your freezer with a new defrost thermostat. This sensor regulates defrost cycles to prevent ice on coils. DIY repair in 10-20 minutes.
This is a 15 yr old Kenmore (GE) refrigerator with top mounted freezer... I knew, for awhile, that I had a DEFROST problem. That was causing water to collect on the inside bottom of the fridge, under the veg./fruit bins. And then occasionally run out onto the kitchen floor if I didn't sop up the water inside. But I delayed the repair because of the hassle of emptying the food, top and bottom, and finding temporary homes for it all. Until I noticed 3 things happen in short order. 1)The water... Read more
Replacement screw for refrigerators. Secures handles, panels, and internal components. Order if yours is missing, stripped, or lost during repairs.
Took about 5 min to replace the handle with the parts ordered. Thank you for the fast service. Read more
Rubber grommet seals the ice maker fill tube where it enters the refrigerator cabinet. Replace if cracked, brittle, leaking, or missing to restore seal.
Replaced original (18 yrs.) 1/4" plastic tubing, clamp and grommet (AppliancePartsPros/GE parts) from outlet of ice maker water control valve to ice maker inlet. Also replaced water supply line to inlet of water control valve with new, GE braided, PEX 1/4" supply line with pre-attached female compression fittings on both ends. Repair job with AppliancePartsPros parts from outlet of water control valve went perfectly well, was simple, and had no leaks when tested. Parts were easy to install,... Read more
Assembly screw kit for refrigerators. Secures handles, shelf tracks, door hinges, and interior panels. Replace missing, stripped, or lost screws.
SELF. Read more
Refrigerator not cooling or compressor overheating? A failed condenser fan motor is often the cause. This repair takes about 10 minutes with basic tools.
Resurched the Needed part. Found Appliance parts pro had the best price. Ordered the part at 2:47pm pm on Thursday. Confirm email immedately received. Shipped email received in less then two hours. Item dropped at my door 1:00pm next day. I only paid for regular shipping. Very impressive. Great job, Thanks Read more
This evaporator fan motor dust cap is an authentic OEM replacement part found on refrigerator and freezer fan motors. This dust cap prevents the fan motor bearing and housing from being damaged by dirt and debris. If the dust cap is cracked or broken, the fan may make loud squealing noises. If the dust cap is not removed and replaced, the fan could stop working and ultimately cause the refrigerator's temperature to be affected. To start, disconnect the power and water to the refrigerator. Remove food from the freezer so that the back panel of the freezer can be accessed to reach the fan. Remove the ice maker and set it outside the freezer. Disconnect the fan and take it out of the freezer to expose the fan's shaft and the dust cover. Pry the dust cover off and install the new one. Replace the fan and cover. Reconnect the wires and reinstall the icemaker. Put the food back in the freezer. Reconnect the power and water.The evaporator fan motor dust cap is a white plastic part that is sold individually. This dust cover is made for use in refrigerators manufactured by General Electric, Hotpoint, and Kenmore.
Replacement of the evaporator fan motor, fan blade, and grommets. The amount of disassembly to reach the part took most of the effort Read more
Refrigerator not cooling but freezer works? Icing up and then warming? This defrost timer control starts timed defrost cycles. Moderate DIY repair.
First I took the technical data sheet off the back of the unit, it was in a brown envelop taped and tucked into the lower equipment cover. Then I compared information from Appliance Parts Pros to the data sheet, matched up the probable culprit parts, and ordered defrost thermostat and defrost control. They arrived promptly.. Unplug the unit from the wall. The defrost control is located in the same space as the light, two screws and the small panel drops down, a tip is to use a short #2... Read more
Seals your freezer door to prevent warm air entry and cold air loss. Replace when cracked, torn, or no longer sealing properly. Verify fit with your model.
REPLACED DOOR GASKETS. Read more
Ice building up on freezer coils? Warm fridge but cold freezer? This defrost heater kit melts frost during the defrost cycle. DIY repair takes 30 minutes.
Inspected the Defrost timer and it seamed to be functioning properly. Ohm ed out the defrost heater element and it also measured out correctly (mine 34 ohms). Bypassed the heater element and found that the unit would run without tripping breaker during defrost cycle. At this point i inspected the wiring to the heater and checked continuity of the wire and continuity to ground, No issues found. So with the heater out of the circuit and not having an issue i ordered heater element from... Read more
Due to manufacturer changes part will be longer than original and must be cut to size. It may also be redesigned in color.
An ApplianceParts Pro representative helped me identify the correct model of my refrigerator. When I called GE, they didn't recognize the model and had no answer. . It involved took 2 easy e-mails for my rep to track down the part I needed. The part arrived the next day. It needed to be shortened, as I was told and it took about 10 minutes to complete the job. Thanks! Read more
Reversible door plug fills unused mounting holes when switching refrigerator door swing direction. Replaces broken or missing plugs for a finished look.
Supplies electrical power from wall outlet to refrigerator. Replace this cord if cut, frayed, overheated, or damaged to restore safe electrical connection.
Spliced new and old power cord near the connections in the fridge and connected them. Didn't mess with the factory harnesses or connections inside actual fridge. Read more
Front door shelf rail for refrigerator freezer compartments. Holds smaller frozen items on the door for organized storage. Replaces cracked or broken rails.
The R134 Drier is an OEM part for GE refrigerators. This component plays a critical role in the refrigeration system by removing moisture and contaminants from the refrigerant, ensuring efficient cooling and preventing damage to other parts of the system. It helps maintain the purity and effectiveness of the refrigerant as it cycles through the system.
You should replace the R134 drier if it becomes clogged or damaged. Common causes of a bad drier include wear and tear over time, exposure to moisture, or contamination from other failing components in the refrigeration system.
Symptoms of a bad R134 drier include:
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Refrigerator clicking but not cooling? A failed overload protector can prevent compressor startup. This part interrupts power during overheating.
Fridge not defrosting or has excessive frost buildup? This defrost thermostat monitors evaporator temperature to control the defrost cycle. 15-minute fix.
Replaced the Defrost Thermostat. the part came in a day. Watched the video which helped a lot it took 15 minutes to swap out the part. Fridge is back up to temp and will keep watching to see if it freezes up again. Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.