Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
The Door Gasket is an OEM part for Frigidaire refrigerators. It ensures a tight seal around the door, preventing cold air from escaping and maintaining the set temperature inside the appliance. Over time, the gasket can wear out, become brittle, or lose its elasticity, leading to gaps between the gasket and the appliance frame. The gasket measures approximately 31" x 60"
Causes of a bad door gasket can vary from normal wear and tear to accidental damage.
Symptoms of a bad Gasket include:
This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
Ordered a new seal, and replaced it with a new one freezer works great now. Read more
The Defrost Timer is an OEM replacement part for Frigidaire upright freezers. It serves as a crucial component responsible for regulating automatic defrost cycles.
Causes of a faulty defrost timer relate to 20,000+ hours of constant exposure to freezer temperatures as low as -10 degrees Fahrenheit. Such extremes can compromise electrical switching mechanisms over prolonged usage periods.
Symptoms of a failed defrost timer include:
This genuine Frigidaire replacement part is compatible with Kelvinator and some Kenmore units as well.
Suspected it was the thermostat, since temperature stayed the same at multiple settings over a 24 hr period. There was only three components inside the freezer besides the evaporator, the fan was working, so I decided to just go ahead and replace the thermostat and defrost thermostat. Also replaced the defrost timer by the compressor, just to get all the old parts replaced with new. I had already replaced the compressor, so now I've pretty much have a new freezer. The new parts works great and... Read more
Refrigerator making loud noises or not cooling? A worn evaporator fan blade often causes these issues. DIY-friendly repair typically takes 30 minutes.
1. After hearing a loud noise on the freezer side of unit about halfway up, I started investigating what it could be? My conclusion was evaporator motor or evaporator fan blade. One of the signs of this issue was a distinct change in sound when I opened the freezer door. I ordered a new motor and blade, not knowing exactly what it was. 2. I couldn't get water to dispense, so I changed the filter and that wasn't the problem. I ordered a water valve and crossed my fingers. These parts arrived... Read more
Freezer not cooling or running warm? A failed evaporator fan motor stops cold air circulation. DIY-friendly repair typically takes 30-45 minutes.
Replaced the control panel and evaporator fan. Read more
Replace your broken, cracked, or missing refrigerator door handle. This cosmetic part attaches to the door with screws for easy opening and closing.
The door handle on our Frigidaire refrigerator had snapped into two pieces. The replacement parts were received within two days from AppliancePartsPros.com. My wife was able to quickly switch out the parts within 5 minutes. The unit looks as good as new. Read more
The Door switch is an OEM replacement part for Frigidaire refrigerators. This part turns the light on/off as the door opens and closes. Causes of a faulty door switch include normal wear of electrical contacts from repetitive on/off cycles. Moisture exposure may potentially corrode internal connections. Symptoms of a bad light/switch include:
This Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore models.
REPLACED THE LIGHT/LAMP SWITCH. Read more
LED light bulb illuminates your refrigerator interior. Replace when bulb burns out, flickers, or stops working. Verify fit with your model number.
Replaced both The electrical board I found under the fridge was very easy to replace. The fan motor took a minute to bed puns and the biggest challenge was taking off/on the back panel to get to it. (By the way it was located in the freezer section. take drawers out to get to it. Read more
Secure door gaskets and interior trim on freezers and refrigerators. Replace broken or missing clips to maintain proper seal and temperature. Confirm fit.
Fixes frost buildup on evaporator coils causing warming or ice accumulation. Test with multimeter for continuity. DIY-friendly repair component.
I replaced it with the Mfg. parts bought from AppliancePartsPros.com. The job went very smoothly, I received the parts a day and one-half after ordering them from your website. I am an HVAC contractor and was so pleased with your service that I'll use you again and again. Read more
Evaporator coils frozen solid? Defrost thermostat senses coil temperature and triggers the heater to melt frost buildup. Straightforward replacement.
Checked compressor windings - ok. Start relay looked no rattle or burning. Start capacitor seamed ok but hard to check. No 120VC to start relay at any time. Ordered thermistor, and electronic control unit. Figuring it was a bad thermistor not telling the ECU it was warm and to turn on the compressor. Or the ECU was damaged and was not sending the 120v to the compressor. Changed the thermistor first (cheapest part and as Appliance parts pros has a return policy I wanted to start there). ... Read more
Freezer not cooling or running constantly? The evaporator may have failed. Professional installation recommended due to refrigerant system work.
Had a friend who is an appliance repair tech. Replace the evaporator, the heater coil, and the filter/drier. Parts were soldered together and the compressor was put under vacuum. Then, charged with 5 oz. of refrigerant. The freezer works great now! Read more
Replace your worn freezer door gasket to restore an airtight seal, prevent cold air loss, and reduce frost buildup. Confirm fit by model number.
Loosened the top half screws, pulled the old seal out, put new seal in, snugged top screws, repeated process for the bottom. Went well, no problems. Read more
Includes service line.
Bearing insert for freezer door hinges. Replaces worn or damaged bearings that cause stiff door operation or poor alignment. Installs in hinge bracket.
Removed door and replaced bottom bearing. Read more
Fix a fridge that won't cool or runs constantly. This temperature control thermostat regulates cooling cycles. DIY-friendly repair, typically 20-60 minutes.
I determined that this was the part to get based on a previous reviewer's post who had a similar problem. I bought the controller, it shipped quickly and I received it two business days later. I followed the instructions of the previous poster and had the device installed in about an hour. The most difficult part or should I say tedious part was unscrewing and then replacing the panel and screwing everything back in. The refrigerator keeps temperature now and turns on periodically as it should. Read more
Adjustable leveling foot installs at the bottom of your appliance to ensure stability and proper leveling. Replace if broken, cracked, or missing.
I determined that it was a problem that occurred during the defrost cycle by resetting the GFCI outlet and forwarding the defrost timer until the defroster came on. Once the defrosting began, the GFCI outlet would reliably trip. I took apart the shielding inside of the freezer and tested the defrosting without the heating element or the thermostat connected. Since that looked good, I tested for proper functionality of the thermostat by removing it, placing it in a working freezer, and checking... Read more