Tfx20jabkww Ge Refrigator Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: 8009
Original Whirlpool light bulb, 40 watt.
Symptoms of needing to replace the light bulb include:
- Dimming or flickering light
- Complete lack of illumination inside the appliance
- Visible signs of damage or burnout on the bulb itself
Causes of a faulty light bulb can include normal burnout over time, electrical issues, or physical damage due to impact or vibrations.
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Kenmore, Frigidaire, GE, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore appliances.
Do-It-Yourself Stories from Customers like You
Jennair jjw9630cas double oven doors did not close all the way and the light would not go out Wayne W. • East Longmeadow , MA • February 13, 2016
I have a Jennair jjw9630cas double wall oven, and after a few years I noticed that the light would not go out, first in the bottom oven, and then in the top oven. After doing some research I discovered this was not uncommon, and the fix usually involved replacing the hinges and/or the hinge receptacles. It didn't look like a difficult fix so I ordered four new hinges and four new receptacles, which arrived quickly. I found a video on YouTube that showed how to replace the hinges and it...
Read more
More
$17.76
- Compare At:
-
$20.96
- You Save:
-
$3.20
Genuine Ge part
By: Ge
Part Number: WR02X10098
The Evaporator Fan Grommet is an OEM part for GE refrigerators. This component serves as a cushion and stabilizer for the evaporator fan motor, reducing vibrations and noise while ensuring the fan operates smoothly. It helps to secure the fan motor in place, maintaining proper airflow and efficient cooling within the refrigerator.
Common causes of a bad grommet include wear and tear from constant use, damage from excessive vibrations, or degradation of the material over time.
Symptoms of a bad evaporator fan grommet include:
- Increased noise or rattling sounds coming from the fan area
- Vibrations felt within the refrigerator
- The evaporator fan motor becoming loose or misaligned
- Reduced cooling efficiency due to improper fan operation
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
This part fixes the following symptoms
-
Freezer section too warm
-
Noisy
See more...
Do-It-Yourself Stories from Customers like You
Fan was making noises. Mark M. • Easton , PA • May 15, 2023
My refrigerator's cooling fan was making a noise. It wasn't loud; in fact, it was barely discernible. However, it was just loud enough to annoy me. The fan blade was hitting the shroud every now and then, creating a subtle, yet annoying sound. I'd tried tightening all the screws back there, and it helped-for a while. The noise came back. After looking at the fan motor, I noticed the bushings; it occurred to me that they might be the culprit. And why not? They were the originals installed at the...
Read more
More
$7.37
- Compare At:
-
$8.36
- You Save:
-
$0.99
Genuine Ge part
By: Ge
Part Number: WR55X24064
The Run Capacitor is an OEM part for GE refrigerators. It plays a crucial role in the refrigerator's cooling system by providing the necessary start and run voltage to the compressor. Without a properly functioning run capacitor, your refrigerator may struggle to maintain the desired temperature, leading to spoiled food and inefficient energy use.
Causes of a bad run capacitor include electrical surges, wear and tear over time, or overheating due to a malfunctioning refrigerator compressor or poor ventilation.
Symptoms of a bad Run Capacitor include:
- The refrigerator compressor fails to start.
- Unusual humming noises coming from the refrigerator.
- The refrigerator cycles on and off more frequently than normal.
- A noticeable increase in energy consumption as the refrigerator struggles to maintain the proper temperature.
This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
Do-It-Yourself Stories from Customers like You
Would not run led dimmed condenser fan would not run Pete M. • Santa Fe , NM • May 16, 2015
We replaced the main circuit board and the LED started to work and the condenser fan worked, but all we had were relay clicking sounds, but no cooling. The compressor had become so hot trying to work when the main circuit board was amiss, that it had popped the over temperature sensor on its side. As some one point out, if you remove the PTC+OLP assembly with the capacitor on it, and shake it, you will hear a rattle inside---and that is bad. We ordered a second round of parts from...
Read more
More
$50.95
- Compare At:
-
$60.12
- You Save:
-
$9.17
Genuine Ge part
By: Ge
Part Number: WR23X37285
The Light Switch is an OEM replacement part for GE refrigerators. It controls the interior light, turning it on when the refrigerator door is opened and off when the door is closed. This ensures proper illumination for visibility when accessing the refrigerator's contents.
A malfunctioning light switch can result from wear and tear, electrical issues, or damage caused by repeated use. Over time, the internal mechanism may fail, or the housing can crack, leading to improper operation.
Symptoms of a bad light switch include:
- Interior light not turning on when the door is opened
- Light staying on even when the door is closed
- Flickering or inconsistent light operation
- Difficulty pressing or releasing the switch
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Refrigerator light switch broken. W W. • Bettendorf , IA • April 20, 2020
I ordered a new switch from APP and fixed my fridge.
However, the video posted for this repair on this site is not applicable to newer refrigerator models.
I have a 2015 GE GTE18IHCRSS and had to drop the control housing (#432 in the diagram) to attach the wire/plug assembly to the switch. Only had to remove the front screw with a 1/4" nut driver and that provided enough of a gap for me to plug in the switch.
So the correct method to replace the light switch in a newer model refrigerator is as...
Read more
More
$19.03
- Compare At:
-
$20.93
- You Save:
-
$1.90
Genuine Ge part
By: Ge
Part Number: WR9X489
The Defrost Timer is an OEM part for GE refrigerators. It serves as a crucial component in managing the defrost cycle of the refrigerator, ensuring that frost buildup is regularly melted away from the evaporator coils. This timer periodically switches the refrigerator between cooling and defrost mode, helping to maintain efficient operation and prevent overcooling or excessive ice accumulation.
Symptoms of a bad Defrost Timer include:
- Frost building up more than usual in the freezer compartment.
- The refrigerator or freezer sections becoming too warm due to prolonged defrost cycles.
- The refrigerator not transitioning out of defrost mode, leading to spoiled food due to inadequate cooling.
Causes of a bad defrost timer can include mechanical wear from continuous use, electrical failures that impede the timer’s operation, or simply aging components that no longer function reliably.
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
This part fixes the following symptoms
-
Won't start
-
Fridge runs too long
-
Frost buildup
-
Fridge too warm
See more...
Do-It-Yourself Stories from Customers like You
Fresh foods section was not cooling but freezer was cold Cynthia B. • Loganville , GA • January 19, 2018
After reviewing a number of testimonials and your videos from your APP.com site I determined my most likely problem was either the defrost heater, thermostat, timer or possibly all three. The real challenge now began. Getting to the specific parts with my specific model number was a real challenge. It was not as easy as removing the light guard and 5 screws since my model had two Track Cant Shelf vertical rails restricting the removal of the back panel. Also, these rails could not be removed...
Read more
More
$41.95
- Compare At:
-
$49.59
- You Save:
-
$7.64
Genuine Ge part
By: Ge
Part Number: WR51X10101
The Defrost Heater Kit is an OEM part for GE refrigerators. It is designed to prevent frost and ice buildup within the freezer compartment by heating up at regular intervals to melt away any accumulated frost. For 12-inch glass tube heater use WR51X10055.
Symptoms of a bad Defrost Heater Kit include:
- Buildup of frost or ice on the freezer walls or around the evaporator coils.
- The refrigerator or freezer section becoming too warm due to blocked air vents by ice.
- Frequent cycling or longer running times of the refrigerator compressor.
Causes of a bad defrost heater can include failure of the heating element due to wear or a burnt-out component, malfunctioning sensors that regulate the defrost cycle, or electrical issues preventing the heater from activating.
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
This part fixes the following symptoms
-
Freezer too cold
-
Fridge too cold
-
Too warm
-
Freezer section too warm
See more...
Do-It-Yourself Stories from Customers like You
Freezer and refrigerator not cold enough Jennifer M. • Ny , NY • July 10, 2018
Yes, a 49-yr old woman fixed this fridge all by herself! AppliancePartsPros was very helpful in the diagnosis of the problem, which I determined to likely be the result of defrost failure. There was a large amount of ice and frost coating the back of the freezer despite the inside temp being 42 degrees. My husband thought I was crazy to think it was a problem with ice when the temperature was warm, but I told him to trust me and I would attempt the repair. He just wanted to throw the old one...
Read more
More
$55.44
- Compare At:
-
$65.97
- You Save:
-
$10.53
Genuine Ge part
By: Ge
Part Number: WR13X10020
The Lower Door Hinge Kit is an OEM part for GE refrigerators. This kit is essential for the proper functioning and alignment of the refrigerator door, providing the necessary support and pivot point for smooth opening and closing.
Symptoms of a failing Lower Door Hinge include:
- The refrigerator door sagging or failing to close properly
- Squeaking or grinding noises when the door is opened or closed
- Resistance or difficulty when moving the door
- Visible wear or damage to the hinge or surrounding area
Causes of a bad lower door hinge can include mechanical stress from frequent use, improper alignment or installation that increases wear, or corrosion from moisture exposure, which can weaken the metal components.
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
This part fixes the following symptoms
-
Fridge runs too long
-
Door won't open or close
-
Door sweating
See more...
Do-It-Yourself Stories from Customers like You
Freezer door cam broken and issue closing door. J G. • Weeki Wachee , FL • March 24, 2017
I followed the directions on the video.....had to look at it a couple of time. Difficult to work lying on the floor for me, but the technique was spot on. I have now replace the door closing cams on the refrigerator door and the freezer door of the side by side unit. Thanks for such great instructions.
Read more
More
$45.95
- Compare At:
-
$54.56
- You Save:
-
$8.61
Genuine Ge part
By: Ge
Part Number: WR2X9391
The Light Socket is an OEM part for GE refrigerators. It is responsible for holding the refrigerator's light bulb and ensuring it receives power to illuminate the interior when the door is opened.
You should replace the light socket if it becomes faulty. Causes of a bad light socket can include wear and tear from regular use, electrical issues such as short circuits or power surges, and corrosion from moisture exposure.
Symptoms of a bad light socket include:
- The refrigerator light not turning on when the door is opened
- Flickering or intermittent light operation
- Visible damage or corrosion on the socket
- The light bulb not fitting securely or falling out
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Our light was flickering and didn't stop with a new bulb Dianne F. • Hampton , VA • February 14, 2015
I researched the model and watched a YouTube video on the repair. I ordered the part. Two days later it arrived and I made the repair. I'm all thumbs in home repairs, but had it done in 5 minutes. My husband was surprised. Nice that I can take care of a few simple repairs around the house.
Read more
More
$10.95
- Compare At:
-
$12.92
- You Save:
-
$1.97
Genuine Ge part
By: Ge
Part Number: WR50X122
The Defrost Thermostat is an OEM part for GE refrigerators. It regulates the temperature of the defrost cycle by sensing the temperature of the evaporator coils and signaling the defrost heater to turn on or off. This helps prevent ice buildup on the coils, ensuring efficient cooling and proper refrigerator operation.
You should replace this defrost thermostat if it fails to regulate the defrost cycle correctly. Common causes of a bad thermostat include electrical failures, wear and tear from regular use, or damage from temperature fluctuations.
Symptoms of a bad defrost thermostat include:
- Excessive frost buildup in the freezer
- Refrigerator not maintaining the correct temperature
- Defrost cycle not activating
- Water leaking inside the refrigerator
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
This part fixes the following symptoms
-
Fridge too warm
-
Fridge runs too long
-
Freezer not defrosting
-
Freezer section too warm
See more...
Do-It-Yourself Stories from Customers like You
Ice melting to a large clump and frost build up GE gss20ietdbb for years no parts were helping issue. Dustin M. • Charlotte , NC • January 07, 2023
My GSS20IETD BB side-by-side refrigerator had been having the ice form into a single mass over a period of a week after cleaning it out. It actually kept breaking my ice maker auger and pushing the slide-in tray or shelf over the ice maker up breaking it also. Frost would form all over food after about a couple of weeks. The ice auger motor would freeze up and stop turning. The coils did not have frost on them when I was able to view them. I replaced the thermistors in the freezer, defrost the...
Read more
More
$41.95
- Compare At:
-
$50.34
- You Save:
-
$8.39
Genuine Ge part
By: Ge
Part Number: 40A15
The Light Bulb (40W) is an OEM component for GE refrigerators. As an essential task lamp, it illuminates the interior of the refrigerator and freezer compartments.
All light bulbs will eventually burn out with consistent use over many years. Vibration during compressor cycles can also potentially disrupt bulb filaments faster.
Symptoms of a burnt out refrigerator light bulb include:
- Dim or no light illuminating inside refrigerator shelves
- Shadows and dark spots making it difficult to find items
- Higher utility costs from leaving the door open to see inside
This bulb is also compatible with refrigerators from brands like Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Nothing worked except the light :) Przemyslaw B. • Wallington , NJ • September 20, 2014
I changed the motherboard - computer and also changed the motor in the freezer, because it was doing a howling sound every time it turned on. The repair technician asked for $500 for a repair and that is on top of the $230 I paid him two days before. I looked up the parts and decided to try myself and it paid off. Great instructional videos. Thanks
Read more
More
$18.95
- Compare At:
-
$22.36
- You Save:
-
$3.41
Genuine Ge part
By: Ge
Part Number: WR60X114
The Evaporator Fan Blade is an OEM component for GE freezers and bottom-mount refrigerator designs. Located inside the freezer compartment, this fan blade spins to circulate cold air evenly throughout the storage space.
Causes of a faulty evaporator fan blade include natural fatigue from running year-round. Freezers exposed to humid environments may experience faster corrosion.
Symptoms include:
- Abnormal sounds like knocking or clunking from inside the walls
- cold spots developing in certain freezer areas
- Higher power bills from inefficient temperature regulation
- Frost or ice patches forming on evaporator coils
This part is also compatible with some brands like Hotpoint, RCA, and Kenmore.
Do-It-Yourself Stories from Customers like You
Broken fan blade Thomas H. • West Blocton , AL • April 21, 2014
I used a set of ring pliers to remove the old retaining ring, then spread the plastic ribs around the fan motor shaft with a small flat bladed screwdriver to ease removal of the old fan blade. I reversed the process to replace the blade, gently tapping a socket from my socket wrench set placed over the motor shaft and ribs with a small rubber mallet. I stopped when the shaft protruded about 1/8" beyond the plastic ribs of the new fan blade, then installed the new retaining clamp ring with the...
Read more
More
$17.95
- Compare At:
-
$24.40
- You Save:
-
$6.45
Genuine Ge part
By: Ge
Part Number: WR2X8474
The Ice Maker Fill Tube Grommet is an OEM part for GE refrigerators. This grommet creates a seal between the ice maker fill tube and the refrigerator, preventing leaks and ensuring that water is properly directed into the ice maker during the filling process.
Causes of a bad grommet can include regular wear and tear, damage from exposure to freezing and thawing cycles, or degradation from exposure to water and moisture.
Symptoms of a bad ice maker fill tube grommet include:
- Water leaks around the ice maker fill tube area
- Ice maker not producing ice properly
- Visible cracks or deformation in the grommet
- Water pooling inside or around the refrigerator
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
This part fixes the following symptoms
-
Leaking
-
Ice maker not making ice
See more...
Do-It-Yourself Stories from Customers like You
Had a cracked plastic ice maker inlet water tube that flooded part of kitchen floor Terry C. • Durham , NC • February 16, 2019
Replaced original (18 yrs.) 1/4" plastic tubing, clamp and grommet (AppliancePartsPros/GE parts) from outlet of ice maker water control valve to ice maker inlet. Also replaced water supply line to inlet of water control valve with new, GE braided, PEX 1/4" supply line with pre-attached female compression fittings on both ends. Repair job with AppliancePartsPros parts from outlet of water control valve went perfectly well, was simple, and had no leaks when tested. Parts were easy to install,...
Read more
More
$32.95
- Compare At:
-
$38.88
- You Save:
-
$5.93
Genuine Ge part
By: Ge
Part Number: WR07X10055
This PTC start relay mounts on the refrigerator compressor and briefly energizes the start winding, then automatically opens as it warms. Replacing a weak relay helps restore reliable compressor starts and consistent cooling. What it does:
- Provides momentary power to the compressor's start winding at startup; the PTC element opens as it heats
- Helps ensure smooth compressor starts and reduces repeated start attempts
- Signs of a failed start device can include no cooling because the compressor won't run
- Clicking or buzzing from the compressor area every few minutes
- Compressor starts intermittently or stops shortly after starting
What's included:
- Includes: 1 PTC start relay
Install notes:
- Disconnect power and pull the refrigerator forward to access the rear service area
- Remove the rear panel to reach the compressor compartment
- Unplug the wire harness and pull the old relay straight off the compressor terminals; note its orientation
- Push the new relay fully onto the compressor prongs, reconnect the harness, reinstall the panel, and restore power
Do-It-Yourself Stories from Customers like You
The compressor was clicking on and off refrigerator was blowing hot air inside Steve F. • Sealy , TX • May 27, 2017
I bought this relay switch and it works great. On the left side of the compressor there is a plastic cover you pry off with a screw driver. The relay switch had one wire plug on it. Just pull the wire off and the pull the relay switch off the compressor.
Read more
More
$21.95
- Compare At:
-
$25.90
- You Save:
-
$3.95
Genuine Ge part
By: Ge
Part Number: WR02X10140
Restore smooth, reliable door movement. This hinge cam riser fits at the lower door hinge to provide the lift and ramp action that helps the refrigerator door open/close smoothly and seal properly—reducing sag, noise, and poor sealing. What it does:
- Interfaces with the lower hinge pin to lift and guide the door during opening and closing
- Helps maintain door alignment and gasket contact for a proper seal
- Can reduce door sag, scraping, wobble, and clicking/popping noises
- Common signs it's worn: door drops or binds, won't stay closed or self-close, or shows an uneven gap
What's included:
Install notes:
- Disconnect power and remove items from the door before servicing
- Support the door; remove the top hinge cover and screws, then lift the door off the lower hinge
- Remove the old riser at the lower hinge and install the new riser in the same orientation
- Reinstall hinges; verify gasket contact and door alignment, adjusting leveling if needed
Do-It-Yourself Stories from Customers like You
Refrigerator door did not close all the way Bill T. • San Juan Capistrano , CA • August 14, 2015
Your "How to" video made it look simple and it was. I ordered the small part - it arrived the next day and I replaced the part in less than 15 minutes!
I had a similar experience with my close dryer. You guys are great!
Read more
More
$9.53
- Compare At:
-
$11.34
- You Save:
-
$1.81
Genuine Ge part
By: Ge
Part Number: WR87X20798
$437.76
- Compare At:
-
$520.93
- You Save:
-
$83.17
Genuine Ge part
By: Ge
Part Number: WR12X10332
The Door Handle is an OEM part for GE refrigerators. This part provides a secure and comfortable grip for opening and closing the refrigerator door.
Causes of a bad door handle can include regular wear and tear, accidental impact, or repeated use, which can lead to cracks, breaks, or loosening of the handle.
Symptoms of a bad door handle include:
- The handle feeling loose or wobbly
- Difficulty in opening or closing the door
- Visible cracks or breaks in the handle
- The handle detaching from the door
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Discolored door handles Kristina N. • Blue Grass , IA • October 14, 2014
Replaced with new handles
Read more
More
$39.95
- Compare At:
-
$47.54
- You Save:
-
$7.59