Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
The Riser Cam Shim is an OEM part for GE refrigerators. This part helps in aligning and leveling the refrigerator door, ensuring it opens and closes smoothly.
Causes of a bad riser cam shim can include regular wear and tear, damage from repeated door openings and closings, or deformation from improper installation.
Symptoms of a bad riser cam shim include:
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Went online to youtube for videos. Could not find a video of draw front but figured it out. Read more
Original GE Part. Kit includes defrost heater, wire harness, and defrost thermostat. Do not order def. thermostat in addition to this kit, unless you need a spare one.
Replaced the defrost heater and thermostat. Removed the back panel in the freezer. Defrosted coils with a hair blow dryer. Removed defective unit and installed new replacement. Refer is back to normal operation. Took more time to defrost than to remove and install heating unit. Read more
The Drive Cup is an OEM part for GE refrigerators. This part engages with other parts to drive the ice out of the molds and into the storage bin.
Causes of Drive Cup failure can range from physical wear and tear from regular use, which may lead to cracks or deformities in the part, to accumulation of frost or ice that hinders its movement.
Symptoms of a malfunctioning Drive Cup include:
Ordered new auger and installed it and now we have clean ice for our drinks. Read more
Replaced Ice maker very easy. Read more
The Ice Door Spring is an OEM part compatible with GE refrigerators. It is responsible for providing tension and support to the ice chute door, allowing it to open and close smoothly. When you activate the ice dispenser, the spring helps to release the door and allow the ice to pass through. After dispensing, the spring assists in closing the door to prevent cold air leakage and maintain the desired temperature inside the refrigerator.
You should replace the ice door spring if it loses tension or breaks, which can happen due to regular wear and tear, frequent use, or accidental damage. A faulty spring can lead to issues with the ice dispenser's operation and overall efficiency.
Symptoms of a bad ice door spring may include:
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
The ice dispenser door was not closing tightly. As a result, there was frost build up in the ice chute, which also was allowing ambient air and temperature into the freezer compartment. Upon further inspection, there was black “schmutz” on the ice door, and the rubber ice funnel and deflector parts were deteriorating. Because the door was not closing tightly, I also assumed that the door-closing spring was week. The parts I ordered were: ice door assembly, ice funnel, ice deflector, spring and... Read more
I removed the drawers and old rails, and screwed in the new ones. It was very straightforward. Read more
Color: Black.
This is the ice container only.
Drilled out the rivets on the rear of the bucket shelf on each side (needed an angle drive drill for the left side) and removed the front screws. Installed the new shelf both sides with original screws in the front and 8-32 bolts and nuts in the rear. 3 screws to install the bucket to the auger assembly. Read more
Changed the washer behind fan blade and it quieted right down. Read more
This left-hand drawer slide assembly mounts inside the refrigerator's fresh food section. It supports the shelf/cover and guides the drawer on its track, restoring smooth operation and proper alignment when the original rail is cracked or worn.
I bought whole new ice bin and it it's now the ice is great. Read more
Pulled out broken one and put on new one. Read more
This replacement part is a snack pan slide rail, and it is intended for use in different types of appliances. This is a genuine replacement part made by General Electric. This part is able to hold up other trays and racks in the refrigerator and freezer so that extra shelf space can be utilized. These slide rails can also hold up trays that can support heavy bottles and drinks. A new snack pan slide rail might be needed if the current ones have become stripped and are unable to latch onto the shelving to support it. It is common that these parts can become brittle over time as exposure to low temperature wears down the plastic. Be sure the shelving of the appliance is clear before attempting to replace the slide rail. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with different types of appliances made by General Electric.
Ordered parts from appliance parts pros and completed installation myself Read more
Replacing the valve assembly was just as easy as the video shows. I had an issue with the part I originally received due to damage in shipment. Contacted customer service whom were very professional. A replacement was shipped the same day and I received the part the next day. Thank you Appliancepartspro.com. Read more
I took the ice bucket out and saw the Plate and the Auger were rusted out I thought about cleaning it but I figured that the rust prevent coating was probability all gone I've had this refrigerator since 98 , so I figured the best way was to buy the replacement parts . the price was pretty good so I went that route , the taking apart was very easy , its the putting back together that takes time , however I took a video of the bucket before I took it apart and the on-line video that... Read more