Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Usually ships within 4 - 14 days
Replace your cracked or discolored range griddle cover with this almond-colored housing. Covers and protects the griddle area when not in use.
I replaced the ball and socket connection for the drum. After doing so, I realized that the belt had been stretched and the tension pulley was not putting enough tension on the belt to turn the drum. After ordering a new belt, extra screw that was lost while disassembling the dryer, and some high temperature lubricant for the drum ball and socket the dryer now runs as well as it did when it was new. Read more
Replaces a broken, worn, or damaged oven door hinge on your range. Allows the door to open and close smoothly. Order if your hinge is cracked or bent.
I replaced the hinges. The door just slides up, after opening it slightly. Each hinge is held by three screws, and has a spring hooked to the inboard end. After removing the screws, I pulled hard on the hinge, to get the spring hook exposed. The long tang, on the spring, allowed me to hook the new hinge onto the spring, before unhooking the old hinge. This is important, since losing the spring into the abyss is a pain to correct. I reinserted the hing, installed the three screws per side,... Read more
The Hinge Assembly is an OEM replacement part for Frigidaire ranges. Responsible for securely mounting the range door or oven door while facilitating easy opening and closing, the hinge assy plays an important role in the overall usability of the appliance. Right side. For left side use 318348801
Causes of a bad hinge assembly can include normal wear and tear over time from frequent use of the appliance, as well as potential damage from attempts to force a misaligned door closed.
Symptoms of a failing hinge assembly include:
This OEM Frigidaire replacement part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
My oven door hinges both broke. The metal on the frame of the oven bent and tore, eventually the hinge metal broke too since it was out of alignment. I bought two replacement hinges with good metal (remember to get one left hinge and one right hinge-the description doesn't clarify that and they look nearly identical). Since the metal on my oven frame was torn, I had to make a custom steel backing for the frame before installing these new hinges. The alignment is perfect now and the hinges... Read more
The Broiler Pan Assembly is an OEM part for Frigidaire ranges and ovens. This part includes both the broiler pan and the grill rack, designed to catch drippings and promote even cooking when broiling foods. This assembly includes pan and insert.
Causes of a bad broiler pan assembly can include wear and tear from regular use, warping or rusting due to high temperatures, or damage from improper cleaning methods.
Symptoms of a bad Broiler Pan Assembly include:
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
Bought one from your company. Very good service Read more
By Frigidaire. 2+0 module type. Employs two spark electrodes for manual surface ignition of a four burner range top with flash tubes to front and rear burners. Very popular module used on many different brands and models. Check by appliance model number, if not sure.
Tappen Gas Stove circa 1981 (uses Fridgidaire parts). Unplugged stove from 110 wall outlet. Spark control module located on back side of stove about mid-way down on left side under a black cover that juts out. Black cover had 2 phillips head screws...removed the black cover and the spark module was right there...held on by 2 additional phillips screws. Sprark module purchased was identical to old one on the stove. Removed each wire, one at a time from the old spark module (slide off) and placed... Read more
I looked around for a replacement but not sure of what I needed or how to fix the problem. I found your website and submitted a question for what I needed. I got a response in less than 24 hours. I ordered it and with in 1 1/2 week got my replacement bulb, in a VERY secure packing. My brother was able to change the bulb and my elderly mother was SSSSOOOO thrilled because it worked right. So....THANK YOU FOR SO MUCH FOR ALL YOUR ASSISTANCE. I nor my elderly mother are NOT mechanically... Read more
Replaced the switches at the gas valve. Appliance Pros is fantastic. I ordered the switches on Sunday and received them on Tuesday, Unbelievable! Read more
The range timer knob shaft is the rotating rod that connects the timer control knob to the internal timer mechanism behind the control panel. Replace when the timer knob spins freely without engaging, feels loose, or the timer won't advance properly.
This electronic control board manages your oven's timing, temperature settings, and display functions. It processes user inputs and controls heating elements, fans, and other oven operations according to selected cooking modes. Replace this board if the oven won't heat, the display shows error codes, or cooking functions don't work properly.
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.