Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
The handles were a simple fix. Just pop out the door trim, which I did by pulling on the very top and bottom of the trim to get it started. Then removed two star screws from the handle. I had to work the chrome plastic top and bottom handle caps off, then reversed the process for installing the new handle. The Recess/Dispenser was a bit more tricky. I pried the trim and control panel off with a putty knife, then the rest was fairly obvious, such as removing screws and wiring connectors. ... Read more
Color: Black.
The ice dispenser door was not closing tightly. As a result, there was frost build up in the ice chute, which also was allowing ambient air and temperature into the freezer compartment. Upon further inspection, there was black “schmutz” on the ice door, and the rubber ice funnel and deflector parts were deteriorating. Because the door was not closing tightly, I also assumed that the door-closing spring was week. The parts I ordered were: ice door assembly, ice funnel, ice deflector, spring and... Read more
4 screws Read more
Replaced it... New part fit perfectly and looks great. Easy fix. Read more
This frame assembly supports and guides the refrigerator drawer, allowing it to slide in and out smoothly. It replaces a bent or broken frame that causes the drawer to stick, fall off its tracks, or not close properly. Essential for proper drawer operation and storage access.
Went online to youtube for videos. Could not find a video of draw front but figured it out. Read more
Plate for dispenser.
Disassemble, replace, reassemble Read more
The recessed grille tray sits behind the front grille at the bottom of the refrigerator and collects debris. Replace when the tray is cracked, warped, or missing, allowing dirt to accumulate in the compartment.
A removable tray that catches drips and spills from the water and ice dispenser. Located at the bottom front of the dispenser area on the refrigerator door. Replace when the tray is cracked, stained beyond cleaning, or doesn't fit properly in its housing.
Replaced both the inlet water valve and the water dispenser valve. Replaced water dispenser switch and water filter. Read more
I fixed the drip with a bit of silicone. I fixed the rusty parts Auger & End Plate by replacing them. I repaired the dispenser by replacing the defective door. I used the various videos connected with the parts ( including related parts that I did not replace but required removing them first) to learn and confirm how to properly remove and replace the parts. These were incredibly valuable, Thank You! Read more
Replacement butter dish with cover for refrigerator door storage. Installs in dairy compartment. Needed when original is cracked, broken, or missing.
The J-nut kit contains multiple threaded fasteners used to secure various internal refrigerator components and shelving systems. Located throughout the refrigerator interior at mounting points, these nuts should be replaced when shelves become loose, components rattle, or existing nuts are stripped or corroded.
I removed ice maker, cleared out frozen food to make room for drill, removed broken support, & drilled out old pop rivet (covering the area below with a cloth to catch the metal shavings). Then I carefully straightened the metal support, loosely installed the new support, and pop-riveted it onto the support using the same size rivet. I reinstalled the ice maker, replaced the frozen food, and turned the ice maker back on. No issues. Read more