Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
This water inlet valve is a genuine OEM replacement part that is sourced directly from the manufacturer for use in washing machines. The water inlet valve is the gatekeeper for the water flow into the washer. When the operator sets the wash cycle, the solenoid fires up and tells the valve to open the gate for hot or cold water or both to fill the washer tub. When the tub has filled to a preset level, the valve gates close and the water flow stops. If this valve fails, the water will not stop and will eventually flood or the water might not be signaled to flow at all. This repair requires a Phillips screwdriver and pliers. Disconnect the power source and turn the water off before working on the washing machine. Remove the back panel from the washer and locate the inlet valve. Disconnect the hoses from the valve. Remove the damaged valve. Install the new inlet valve. Connect the hoses in the same order they were removed and put the back panel on the washer. Reconnect the water and power.This water inlet valve is made of molded plastic and is individually sold. It does not include screws. It is made specifically for washing machines manufactured by LG.
I found other posts on AppliancePartsPros.com to be helpful. Most people and pros indicated that it was the Cold Water intake valve which has 4 solenoids on it. I watched the video to replace the Hot Water valve which is right next to it. My washer opened differently than the one in the video but it was not hard to figure out. Tools needed; Philips screwdriver and pair of regular pliers. I took the screws off of the small panel on top on the back of the washer. This allowed the control... Read more
Replaced moisture sensors and thermistor, they helped more heat but still not enough, checking the gas interval, and it seemed ok but when the light (burner) is on it is not staying long enough like before. Checked gas line and found out the leaking gas very small crack at the end of connector from dryer to gas pipe. Replaced the accordion gas hose and it was the culprit. Read more
Sensor assembly Read more
The display control board that manages the electronic controls and digital readout on your dryer. This board processes user inputs and displays cycle information and error codes. Replace it if the control panel is unresponsive, displays incorrect information, or shows garbled text.
The control board on my LG washing machine died. An LG authorized repairman said that a replacement part was unavailable. Next day, I found the part on AppliancePartPros.com. FedEx delivered it two days later, and with just a bit of effort, I managed to remove and replace the dead control board myself. The only tricky thing is getting the new board in exactly the right place -- if you overtighten the screws, the board presses up against the backside of the keypad and multiple buttons are... Read more
The electronic control panel mounted on the front of the washing machine that displays cycle information and accepts user input. Replace if the display shows garbled text, buttons don't respond, or the screen remains blank during operation.
This primary control board manages all dryer operations including cycle selection, timing, and safety functions, located behind the control panel. Replace when the dryer won't start, cycles don't advance properly, or the unit displays error codes indicating control board failure.
After checking all sensors to make sure they were good, I replaced the control board. Read more
This is a main control board intended for use with washing machines. This is the part that controls all of the functions on the appliance. This includes managing each cycle.When this part fails, the controls will not work properly. When the button to start the wash is pressed, nothing will happen. It is also possible that some functions will work while others won't. The appliance may also display an LE error code. In some cases, the washing machine will not turn on, fill, spin, or drain. If the cycle does start, it will likely stop working after a few seconds if this part has gone bad. Unplug the washing machine before replacing this part.This main control board is compatible with washing machines that are manufactured by LG. This part is sold individually. It is sourced directly from the manufacturer itself.
Persistent LE code despite swapping the Hall sensor. Wiring harness checked out ok from sensor and motor to the motherboard.with low resistance values and no changes with moving the wiring bundles, so I assumed no internal wiring breaks. Replaced motherboard and so far this seems to have corrected the problem. Read more
Replace the main board. Read more
Before ordering, please look at original board and contacts. LG uses two different boards and your model may use 6871ER1003C
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.