Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Usually ships within 4 - 14 days
Washer tub backsplash gasket seals the connection between the tub and backsplash. Replace if you notice water leaking during cycles. Confirm fit with your washer model number before ordering.
This tub-bearing split ring is an OEM replacement part designed for GE washing machines. This part measures 2 inches in diameter. It is positioned between the inner and outer tubs to hold the tub bearing inside the outer tub. The Tub Bearing Split Ring not only supports the tub/hub assembly but also ensures smooth operation.
Symptoms of a bad Tub Bearing Split Ring include:
Causes can be extended use over time which leads to wear and fatigue of the split ring material. Cracks or breaks can develop, reducing its stability and load-bearing capacity.
This genuine GE replacement part is also compatible with Hotpoint, RCA and some Kenmore front-load models.
NOTE: For the washer outer tub seal order WH02X10383.
I had never worked on a washing machine before but after watching the online videos I felt like I could do the repair. I was almost positive it was the Mode Shifter and Shaft Assembly that was bad. I could hear the bearing making a grinding noise when I turned the tub by hand. I ordered the part I needed plus additional parts that could be an issue later such as a drive belt, tub bearing, tub seal, tub nut, split ring, etc; Preventive maintenance that would keep from having to tear it all... Read more
If your washer won't fill, overfills, or leaks when off, the water inlet valve may be faulty. Simple 10-20 minute DIY repair with basic tools.
Ordered water inlet valve. Two screws to take out. Disconnect the hose. Disconnect the two wires. Put in the new valve. Reverse the procedure. Whole thing took about 10 minutes. Read more
The Knob Clip is an OEM part for GE washing machines and dryers. This small but crucial component is designed to secure the control knob to the appliance's control panel.
Over time, knob clips can wear out or break due to frequent use or accidental damage. When this happens, the control knob may become loose, fall off easily, or fail to engage the control panel properly, making it difficult to set the appliance to the desired cycle or function.
Symptoms of a bad Knob Clip include:
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
I actually called a repair service in our area. The serviceman asked questions and detected that I didn't need a timer unit but thought it was just a knob that was required. He offered to come out but the expense would be considerable. I am SO relieved that it was indeed the knob, and the dryer was fixed. In this time in our lives, every penny counts. I must applaud the serviceman for his honesty and dedication to his trade. He directed me to this website, but also added if there were any... Read more
The Agitator Assembly is an OEM part for GE washing machines. This part moves clothes through the water and detergent during the wash cycle. This part ensures thorough cleaning by creating the necessary motion to distribute and cleanse laundry evenly.
Causes of a bad Agitator Assembly can range from wear and tear over extended use, to damage from overloading the washing machine, or even issues with the drive mechanism that powers the agitator's motion.
Symptoms of a bad Agitator Assembly include:
Replaced the broken agitator on my GE washer & couplin. Took a flat rope placed under the old agitator and with a stern jerk it popped off. Then a 7/16 socket set with a long extension took the bolt lose, and removed the couplin. Replaced the new couplin, with the new bolt tighten. Slide the new agitator into place with a stern push it snapped in place. Works perfectly. Thank you for the fast shipping. Read more
Called repair man, told him it was making noise and not spinning. he told me that it was a GE and that i should put in on the curb. Opened the washer up myself and found a broken clip. Ordered the clip and it was there almost 24 hours later with standard shipping and the washer is back to normal. Read more
The Drain Hose is an OEM part for GE washing machines. It is specifically designed to channel used water out of the washer and into the household drainage system.
Causes of a bad drain hose can include physical damage from movement or installation, clogging from lint and debris, or degradation of the hose material over time, leading to leaks and inefficiency.
Symptoms of a bad Drain Hose include:
I did it Read more
Ordered the replacement part from Appliance Parts Pros watched the helpful installation video. Installed the new part with no issues. Always a pleasure using Appliance Parts Pros!!! Read more
Compression ring for dial.
Replace timer knob assm Read more
Replaced transmission, all seals, and dampers. It is a complicated, messy repair but costs much less than replacing the machine. This is the second tranny I have put in the 30 year old machine and now it works like new. Take the time to replace all seals if you do this repair. No use putting a new tranny in with old seals that will crack. Read more
Harness to corset & shifter
Includes 12 terminals.
I had to replace the 3 terminals and try to put them in the new terminal receptacle. I replaced the lid switch because I broke the old one trying to diagnose the problem. I found the helpful video on this site after I had already started. Read more
Color: black. It measures a little over 1 inch in diameter.
The two parts I ordered were exactly the parts needed to repair the dryer. Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.