Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
This water level pressure switch monitors the tub's fill level and tells the washer when to stop filling and move to the next step. Replace it to restore accurate water levels and dependable cycle progress.
What's included: 1 pressure switch Install notes:
Purchased the switch pressure and changed the whole thing Read more
Took out the broken one and snapped the new one in , done. Read more
Fix washer overflow issues with this water level pressure switch. Monitors tub water height and signals controls to stop filling. Common DIY repair.
Ordered level switch Read more
The Drain Hose is an OEM part for GE washing machines. It is specifically designed to channel used water out of the washer and into the household drainage system.
Causes of a bad drain hose can include physical damage from movement or installation, clogging from lint and debris, or degradation of the hose material over time, leading to leaks and inefficiency.
Symptoms of a bad Drain Hose include:
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
I did it Read more
This genuine OEM part is a drive motor for washers. The drive motor is the main engine that drives the washer tub allowing it to rotate and wash clothes effectively. If the washer is no longer spinning or the power has significantly decreased, it might be a sign that the drive motor needs to be replaced. Luckily, replacing this part is a relatively simple repair.To replace the drive motor, start by unplugging the washer. Once unplugged, move the washer away from the wall to gain access to the back panel. Uninstall the back panel by removing the screws that attach it. After removal, locate the drive motor and proceed to unthread the mounting screws holding it to the washer. Proceed to pull the old motor out of its place and install the new motor by threading the screws that secure it. This replacement part is sold individually and is compatible with GE, RCA, and Hotpoint brand washers.
New motor. The motor was ok, but the control board mounted on the motor wasn't. Can't buy to control board separate from the motor. Easy to replace the motor, but not so easy to troubleshoot to make sure the problem was the motor and not something else. Read more
Outer tub cover that snaps over the washer's outer tub assembly. Replace if cracked, broken, or missing to restore proper clearance and protection.
I had to remove the front panel of the washing machine and top of the washing machine. i started by removing all the top screws as shown in one of videos. disconnected all the electrical wires (i have a commercial washer) and lifted the front panel over the back of the machine. i was then able to remove the top of the washing machine to give me access to the tub straps and the corresponding screws. i removed the broken straps and then was able to remove the tub cover by pushing down it down... Read more
Replaced obvious defective part with purchased item. Read more
Replaced transmission, all seals, and dampers. It is a complicated, messy repair but costs much less than replacing the machine. This is the second tranny I have put in the 30 year old machine and now it works like new. Take the time to replace all seals if you do this repair. No use putting a new tranny in with old seals that will crack. Read more
Harness to corset & shifter
Includes 12 terminals.
I had to replace the 3 terminals and try to put them in the new terminal receptacle. I replaced the lid switch because I broke the old one trying to diagnose the problem. I found the helpful video on this site after I had already started. Read more
Ordered new timer, dial and control knob assembly. After unplugging machine I removed the knobs from the control consul. Removed three screws holding consul face plate from rear of machine. Moved faceplate forward to gain access to electronic components. Timer is located on right with one hold down screw which I removed. Lifting timer from mount location I removed wiring harness. Installed harness on new times and inserted into hole for knob. It would be helpful if front was market on timer.... Read more
Washer leg and platform assembly that supports and levels your washer. Replace if the leg is cracked, broken, or the platform is damaged or missing.
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.