Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Fix a washer stuck mid-cycle or showing overfill errors with a new water level pressure switch. This part detects water levels to control fill cycles.
Machine was a front load washer, after doing some research found that problem is usually caused by pressure sensor or the spider arm which attaches motor to tub. Read more
Fix a washer that won't drain or shows ND error code. This drain pump assembly removes water effectively. Most DIYers complete this repair in 15-20 minutes.
My washing machine was not draining. I opened the access panel in the back. Checked both the incoming water line and the outgoing line. Both lines were open. Checked inside the pump for a foreign object, and it was also clear. I decided to replace the pump. Ordered the pump online. It's fixed and much quieter. My first washing machine repair! Read more
Supports your dryer door and allows smooth opening and closing. Replace if the door sags, has excessive play, won't stay shut, or the hinge is cracked.
I fixed it by replacing the door switch assembly, door hinge and hinge bushing. The videos you provide was a great help on fixing the problem in no time at all. Ordered parts arrived the next day plus the parts were the correct ones. Read more
Stabilizes your washer drum during spin cycles. Replace if damaged or causing excessive vibration. Confirm fit with your model number before ordering.
Broken spider on Samsung WF330 after 8.5 years - faithful operation up to that point, so repair attempted. Spider, bolts, and support spring bushings (which can be unsnapped to make spring removal and thus tub removal super easy) ordered along with tub seal, bearings, and shaft seal from Amazon.com. Spider coated with Rustoleum appliance 'epoxy enamel' and washer re-assembled. Most difficult/time consuming aspects were orientation of tub to get in and out, cleaning of spider... Read more
Machine screw for Samsung washers and dryers. Secures internal components and panels. Replace if screw is stripped, missing, or damaged during repairs.
Hex bolt secures internal components in your washer drum assembly. Replace if bolt is stripped, corroded, or missing during repairs like spider replacement.
Like so many before us, we too had the infamous corroded and cracked drum spider. Talk about a major design flaw; it's amazing how manufacturers are able to get away without more accountability on this problem, instead they just pick off consumers one at a time, with many just junking their machines and replacing them long before what was traditionally thought of as a reasonable service life. APP's video for replacing the spider in an LG machine was really helpful, as the Samsung only has... Read more
Dryer Mounting Screw is essential for securing your Samsung dryer firmly in place, ensuring it operates safely and efficiently. This genuine OEM part guarantees a perfect fit, providing the necessary stability and support for your appliance during its operation. Crafted from high-quality, durable materials, the mounting screw offers long-lasting performance and reliability, standing up to the demands of daily use. Installing the Dryer Mounting Screw is straightforward, enabling you to restore your dryer's functionality quickly and without hassle. By replacing worn, missing, or damaged screws with this genuine OEM part, you maintain the structural integrity and proper alignment of your Samsung dryer, which is crucial for optimal performance. This Dryer Mounting Screw helps prevent excessive vibration and potential damage to your appliance, thereby enhancing its overall efficiency and lifespan. Compatible with a wide range of Samsung dryer models, it ensures a secure fit and dependable operation every time. Trust in this genuine OEM part to deliver exceptional quality and support the optimal performance of your dryer, ensuring it operates smoothly and efficiently for years to come. Whether you're performing routine maintenance or undertaking a repair, the Dryer Mounting Screw is a reliable choice for keeping your Samsung dryer in top condition.
Replacement power cord for washers. Connects washer to wall outlet for electrical supply. Replace if cord is damaged, frayed, chewed, or cracked.
First I checked the breaker and outlet and both were good...then I unplugged the machine, took the top off, and removed the control panel. I check the wiring to see if there were any loose plug ins, etc...This is where I figured the panel was bad (or possibly the power cord) so I ordered both. The parts arrived the next day. (incredibly fast shipping) Since I wasn't expecting them til after the weekend I left everything disassembled and went on a mini vacation for a couple of days. Upon... Read more
This is a shipping bolt and bracket assembly used to secure the washer's inner tub during transport, preventing damage to the suspension system. The bolts lock the drum in place so it cannot move while the machine is being relocated. Install these bolts before moving the washer to a new location, and remove them before operating the machine - leaving them in during use can cause excessive vibration and damage to internal components.
Since I'm useing these items for an upcoming move. The moving crew will be installing as well as removing them after use. Read more
Fix excessive wobble and shaking during spin cycles. This washer suspension spring absorbs vibration and stabilizes the drum. Moderate DIY repair.
Replaced the suspension components by slightly lifting and supporting the drum assembly allowing replacement of the two support springs, followed by replacing the two shock dampers located at the lower front of the machine, followed by replacing the two rear dampers. The only difficulty was in designing a system to gently lift and support the drum assembly, needed to safely replace the top support springs. None of this could have been done without the wonderful support of Appliance Parts Pro... Read more
The Washer Plain is an essential component designed specifically for Samsung washers, ensuring your appliance operates smoothly and efficiently. This genuine OEM part meets Samsung's stringent quality standards, providing a reliable solution for replacing worn or damaged washers in your machine. The Washer Plain features precise engineering that guarantees a perfect fit, making installation straightforward and hassle-free. Constructed from durable materials, it offers long-lasting performance and contributes to the overall stability of your washer. By choosing the Washer Plain , you are investing in a part that enhances the functionality and lifespan of your Samsung washer. Compatible with a wide range of Samsung washer models, this genuine OEM part ensures that your appliance continues to deliver the performance you expect. Whether you're a DIY enthusiast or a professional technician, the Washer Plain provides a dependable solution to keep your washer running at its best.
Difficult job. Required the complete washer to be taken apart.. With the help of your videos and youtubes was able to get through it. Cleaned everything inside and out. Attached the flange shaft assembly to the inner stainless steel tub via the spider bolts and basically worked backwards from the disassembly. Took a long time total of about eight hours for the whole process not including the cleaning. But it saved me about $600 dollars. Read more
Fix washer leaks or pump vibration with this pump clip ring. Secures the pump connection to prevent water leaks during wash cycles. Simple fix.
Keeps your washer stable and balanced. Replace if worn, damaged, or rubber base is missing to prevent walking and sliding. Verify fit with your model.
The front legs were slightly worn and the rubber coverings were missing from the rear feet. This allowed the washer to slide easily on the tile floor. I replaced all four feet. This only required a 12 mm open end wrench. After leveling the washer, things were improved, but I also took the opportunity to replace the four shock absorbers under the drum. The shock absorbers were 5+ years old and one was showing signs of wear / damage. This required removing the front and rear panels with a... Read more
Secures hose connections in your washer to prevent leaks and maintain water flow. Replace if you notice drips or loose fittings. Verify fit with your model.
Followed your excellent easy repair videos. Made sure to clean off screws and use blue loctite for the drum rotor. Read more
Supports and stabilizes your dryer door hinge assembly. Replace if the original is cracked, broken, or causing door misalignment or sagging issues.
Securely holds your washer's drain hose in place during operation. Replace if the hanger is cracked, broken, or missing to prevent hose movement.
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.