Wfg320obb1 Parts

This hinge receiver secures the appliance door to the cabinet frame to restore proper alignment and stable operation. Replace a damaged receiver to stop door sagging, gaps, or uneven closing. What it does:

• Anchors the door hinge to the cabinet so the door opens and closes smoothly
• Restores correct door alignment to eliminate rubbing or uneven gaps
• Reduces door sag and prevents the door from catching or sticking
• Works with the hinge assembly to maintain a tight door seal

• Disconnect power to the appliance before starting any repair to avoid injury
• Support the door while removing hinge fasteners to prevent the door from dropping
• Use appropriate hand tools; inspect hinge hardware and replace any worn screws or bushings
• Test door operation and alignment after installation; adjust hinge position as needed

The Clip is an OEM component specifically designed for Whirlpool ranges. This clip plays a role in securely holding and mounting components within the appliance. 

The clip is designed to securely grip parts in place, preventing unwanted movement or dislodging that could impact the operation or result in damage. It allows for components to be effortlessly installed while remaining firmly affixed. 

Causes of a bad clip can include wear and tear over time, damage due to excessive force or impact, or deterioration from heat exposure. 

Symptoms of a bad clip include: 

• Loose or detached components inside the appliance 
• Increased vibration or unwanted noise during operation
• Components that are not sitting securely or properly installed
• Difficulty accessing or removing parts that rely on the clip 

This OEM Whirlpool part is compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This surface igniter is the replacement spark electrode used on gas cooktop burners to create the spark that lights the burner. It restores reliable ignition so burners light when you turn the control knob. What it does:

• Produces the spark that ignites the gas at a surface/burner element
• Replaces a cracked, worn, or non-sparking electrode
• Common fix for burners that click but won't light or that fail to spark
• Works with the existing electrode wiring and mounting location

• Disconnect power to the range and turn off the gas supply before starting
• Handle the ceramic tip gently to avoid chipping; do not touch the tip with bare hands
• Confirm correct orientation and secure mounting; match wiring to original connections

Burner cap that sits on a sealed gas cooktop burner head to protect the burner and shape the flame for more even cooking. Replacing a damaged cap can restore proper flame pattern and heating performance. What it does:

• Fits over the burner head to direct and stabilize the gas flame for consistent cooking heat
• Shields the burner head from spills, food debris, and corrosion
• Common symptoms of a bad or missing cap: uneven or weak flame, burner heats poorly, flame lifts or blows out, or ignition difficulty
• Works with sealed cooktop burners to maintain correct flame distribution

• Ensure the cooktop is completely cool and the gas supply is turned off before service
• Most sealed burner caps are a simple drop-in replacement; align the cap on the burner head so it sits flat
• Clean the burner head and ports of debris before installing to ensure proper seating and flame shape

This inner door glass is the oven's interior window panel that restores a sealed, visible oven cavity for safe cooking and easy monitoring. It replaces cracked, chipped, or fogged inner door glass to help maintain proper oven operation. What it does:

• Replaces damaged or cracked inner oven door glass to restore visibility and safety
• Helps maintain the oven's sealed cavity for consistent cooking performance
• Stops rattling or vibration caused by loose or broken interior glass
• Reduces heat loss from a compromised door interior

• Disconnect power to the oven and allow it to fully cool before starting.
• Glass is fragile — wear cut-resistant gloves and eye protection during removal and installation.
• Follow the oven manufacturer's door removal and reassembly steps; keep track of screws and clips.

This leveling foot threads into the appliance base to support and precisely level the cabinet on uneven floors. Replacing a worn or missing foot restores stability, reduces rocking and vibration, and helps doors and components operate correctly.

• Provides height adjustment to level the appliance on uneven floors
• Stabilizes the cabinet to minimize rocking, rattling, and excess vibration
• Helps maintain proper door alignment and seal contact when leveled
• Common signs of wear: broken/missing pad, stripped or seized threads, unit wobbles or won't sit level

• Disconnect power; shut off water supply if applicable
• Protect flooring and use a helper to carefully tilt or raise the appliance for access
• Unthread the old foot; hand-thread the new foot into the base insert, avoiding cross-threading
• Use a level to adjust feet until stable; verify clearances and operation

The Valve-Brnr is an OEM part for Whirlpool ranges. It is responsible for controlling gas flow to the surface burner.

Symptoms of a bad valve-brnr include:

• Unstable or irregular flames when operating burners
• Inability to achieve desired flame height or control temperatures
• Burners that cannot be turned on or off properly
• Gas leaks from faulty valve components

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This replacement power cord restores the appliance's main AC connection so it can receive power safely. Use this cord when the original cable is frayed, cut, melted, or otherwise damaged to prevent intermittent power or electrical hazards. What it does:

• Replaces the appliance's factory power cable to restore reliable electrical connection.
• Transmits mains power from the outlet to the appliance's internal wiring and controls.
• Addresses symptoms such as no power, intermittent power loss, visible cord damage, or burn/melt marks at the cord or plug.
• Helps prevent electrical arcing or shorting caused by damaged insulation or exposed conductors.

• Disconnect the appliance from power at the breaker or unplug before starting any work.
• Verify the cord matches the appliance's connector and routing; do not modify cord ends or splices.
• Secure all strain reliefs and terminal connections per the appliance's service instructions.

The Hinge-Door is an OEM component specifically designed for Whirlpool gas ranges. It is the stainless steel door hinge assembly that allows smooth, controlled movement of the oven door. The hinges support the weight of the door and maintain proper alignment between the door and oven cavity.

Symptoms of bad door hinges include:

• Loose, wobbly, or sagging door that does not stay firmly in place
• Difficulty in fully opening or closing the door 
• Excessive noise or vibration from the hinges
• Pinholes, cracks, or other damage to the hinge surface

Causes of failure are typically wear over the heavy usage life of a range. Hinges may also become misaligned or damaged by accidental impact.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models. 

This main wiring harness connects the control console (LCC) to the appliance's electrical components, restoring reliable signal and power routing for controls. It replaces damaged or worn harnesses that cause intermittent or non-functioning controls. What it does:

• Routes power and control signals between the console LCC and internal components
• Restores lost or intermittent control functions caused by broken, frayed, or burned wires
• Prevents error codes or shutdowns from poor or corroded connector contacts
• Enables proper operation of buttons, displays, and control-driven features

• Disconnect power to the appliance before beginning any work to avoid electrical shock
• Handle connectors carefully; align pins and push fully to ensure secure connections
• Route harness along existing clips and channels to prevent chafing or pinching
• Inspect mating connectors and control board for damage before final assembly

This mounting bracket secures appliance components and panels to keep assemblies aligned and stable, helping prevent rattles and loose parts. It's a simple replacement that restores proper fit and support where the original bracket has failed. What it does:

• Provides rigid support for internal components or exterior panels to maintain alignment
• Stops vibration and rattling caused by a broken or bent bracket
• Restores secure attachment points for screws and fasteners
• Helps prevent additional wear from loose parts moving during operation

• Always unplug the appliance or disconnect power before starting any repair
• Remove necessary access panels to reach the damaged bracket; keep track of fasteners
• Reuse original screws if undamaged; replace stripped or corroded fasteners
• If alignment issues persist after installation, recheck fit and mounting points for damage

Color: White

This genuine ground screw secures appliance grounding connections to the chassis, helping maintain electrical safety and reliable grounding. It's a direct-fit fastener used where a secure ground point is required. What it does:

• Provides a secure chassis grounding point for appliance electrical safety
• Secures ground wires or grounding straps to sheet metal or grounding posts
• Helps prevent loose ground connections that can cause intermittent faults or safety risks
• Matches OEM thread and length for correct fit and electrical contact

• Use appropriate tools; avoid stripping the head or over-tightening which can damage threads or the grounding surface
• Ensure the mating surfaces are clean and free of paint or corrosion for good electrical contact
• Disconnect power to the appliance before servicing electrical grounding connections

This replacement mounting screw secures panels and small components on compatible Whirlpool appliances, restoring proper fit and reducing rattles or loose parts for a solid, finished appearance. What it does

• Fastens control panels, trim pieces, or internal brackets to the appliance chassis
• Helps stop panel vibration, rattling, or misalignment caused by missing or worn fasteners
• Restores secure attachment after disassembly for service or part replacement
• Simple hardware replacement that maintains original fit and function

• Disconnect power to the appliance before servicing to avoid shock or injury
• Use the correct screwdriver or bit to avoid stripping the head
• Thread gently and stop when snug — do not overtighten to prevent damage to mating parts
• Keep removed hardware organized to ensure correct reassembly