Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
The Cold Water Inlet Valve is an OEM part for Bosch washing machines. It is designed to regulate the flow of cold water into the washing machine during the wash cycle. This valve operates based on signals from the washing machine's control board, e
First - shut off water valves & unplugged electric. Second - opened up back of washer & removed top part as well. Third - turned hot & cold water back on one at a time to see where the leak was coming from...lucky for me it was the inlet valve which was right there at the back of washer. Turned water off again. Fourth - located part on internet - and found you & ordered part but not before I went to Lowe's and called local appliance part stores to see if I could find...did not...came home and... Read more
Seals washer door to prevent water leaks during wash cycles. Replace if torn, cracked, or moldy. Confirm fit with your model number before ordering.
The instructions that came with the parts did not match the project I was doing, so those were not helpful. I looked up videos on YouTube and those all made it look way easier than it actually was. From what I could tell at that point, I wouldn't need to dismantle anything. I would simply be able to remove the gasket and put the new one in its place. I followed YouTube instructions and got the old one off, and got the back of the new one on. Trying to get the spring ring around it was an... Read more
Replaces a broken, cracked, or worn washer door hinge. This pivoting component attaches the door to the machine body for smooth opening and closing.
Replaced the door hinge, unscrewed the door from the hinge then removed old hinge & screwed on new one. I did mark where the old hinge was positioned before removing. Once new hinge was on I was able to attach the door. Very simple repair that took me approx 10 mins. Read more
The Hot Water Inlet Valve is an OEM part for Bosch washing machines. It regulates the entry of hot water into the machine, crucial for cycles requiring warm or hot washes. Activated by the machine's control system, this valve opens at the precise m
I wanted to only mess with the washer in a single 30-minute session. So, I assumed both solenoid valves were leaking and purchased replacements. It was a simple project, as well as a good chance for my 13-year-old son to accomplish something practical. Steps/tools used, in order: STEP/TOOL 1: Pull the washer electrical plug from the wall; no tools needed. STEP/TOOL 2: Shut off the hot and cold supply hose valves in the wall; no tools needed. STEP/TOOL 3: Unscrew the hot and cold water female... Read more
Secures the door boot to the tub on front-load washers. Replace if you notice increased vibration, noise, or water leaks. Confirm fit with your model.
I saw a tube video of a guy that replaces the boot without taking any of the washer apart. The boot was no problem, I had the old one off and the new one on in 20 minutes... The rear wire/spring clamp I found impossible to do. the spring is so hard to stretch. I tried till both of my thumbs were bleeding from the pressure. So I took off the top control panel, had access to the top of where the boot clamp groove is. I took one end of the wire off the spring, lubed it up with dish soap, put it... Read more
Secures the door boot gasket to the washer tub. Replace if stretched, rusted, or causing leaks. Confirm fit with your Bosch front-load washer model.
Controls drum movement and reduces vibration during the spin cycle. Replace if worn, cracked, or causing excessive bouncing to restore stability.
Removed the rear panel, top lid and found burnt belt and what appeared to be worn out plastic dampers/shocks on bottom of drum. I had called several repairmen and they were all 7-10 days behind. I live in a small town, 60 miles from a metro area and there are very few qualified techs to work on my washer dryer, i was told. A Google search found this site and i was able to EASILY FIND the parts I needed and they WERE IN STOCK. I hoped to get the parts quick and even paid for next day delivery,... Read more
Delivers hot water from your heater to the washer. Replace if leaking, cracked, or damaged to prevent water damage. Verify fit with your model number.
Turned off the water. Used a locking wrench to take off the old hot water intake. Replaced it with this. Works perfectly. Read more
Seals the door opening on front-load washers to prevent leaks. Replace if torn, moldy, or leaking. Verify fit by your model number before ordering.
Ordered a new seal kit and installed myself. Read more
Outer tub seal creates a watertight barrier between tub halves to prevent leaks. Replace if you notice water pooling or leaking during wash cycles.
Prevents water leaks where the drum connects to the machine. Replace if you notice leaking or bearing noise. Confirm fit with your model number.
I ordered the parts. Watched a youtube video. and tore it apart. Knocked out the bearings and seal, cleaned it up and popped the bearings and seal back in. Put it back together, and wallaa...no more jet engine. Read more
This sleeve is a small guide/bushing used in select Bosch-built appliances. It spaces and supports a moving component to keep it aligned and reduce friction, helping the mechanism operate smoothly and quietly.
The Drive Motor is an OEM replacement part for Bosch washing machines. This powerful motor is responsible for driving the drum rotation during the wash and spin cycles.
A bad drive motor can occur due to electrical faults, mechanical issues, or
Replacing the drum drive motor. Some earlier models only require motor brushes to be replaced. Unfortunately this one requires the entire motor be replaced. I placed the order and had it in my hands the next day. Awesome! Thanks! Read more
Plastic baffle installs on the inner drum rim to lift and tumble clothes during wash cycles. Replace if cracked, broken, or missing pieces.
Ordered the perfect part from AppliancePartsPros and it fit well and that was that. Read more
Replacement leveling foot supports and levels your washer for steady operation. Install this foot if yours is worn, cracked, or missing to restore balance.
Was the door latch, easy to replace. I really recommend the appliancepartspro.com,the delivery was so fast 1 day. Read more
Directs water from your home supply into the washer. Replace if cracked or leaking to restore proper fill and prevent water damage. Confirm fit with your model.