Wfmc3200/Uc/01 Parts

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

The Cold Water Inlet Valve is an OEM part for Bosch washing machines. It is designed to regulate the flow of cold water into the washing machine during the wash cycle. This valve operates based on signals from the washing machine's control board, ensuring the right amount of cold water is provided.

Causes of a faulty cold water inlet valve can include wear and tear over time, clogs or blockages in the valve, electrical issues, or valve failure.

Symptoms of a bad cold water inlet valve may include:

• Insufficient or no cold water flow into the washing machine
• Leaking or dripping water from the valve during the wash cycle
• Inconsistent or inadequate water supply for washing clothes
• Error codes related to water supply or filling

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

Note: For the Hot Water Valve, order part number 00422245.

The Door Hinge is an OEM replacement part for Bosch washing machines. This durable component serves as the pivoting mechanism that allows the washer door to open and close smoothly and securely.

Causes of a bad door hinge include:

• Normal wear and tear over time and repeated use
• Physical damage from impact or mishandling
• Corrosion or loosening of the hinge components

Symptoms of a failing door hinge can manifest as:

• Difficulty opening or closing the washer door
• The door not properly aligning or fitting flush when closed
• Excessive wobbling or instability of the door
• Noises or grinding sounds when operating the door

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore washing machine models.

The Hot Water Inlet Valve is an OEM part for Bosch washing machines. It regulates the entry of hot water into the machine, crucial for cycles requiring warm or hot washes. Activated by the machine's control system, this valve opens at the precise moment to allow the correct amount of hot water to mix with the cold, ensuring the selected temperature setting is accurately achieved. 

The causes behind issues with the hot water inlet valve often include sediment build-up from hard water, wear and tear from regular use, or electrical failures preventing the valve from operating.  

Symptoms of a malfunctioning Hot Water Inlet Valve include:

• Water that is too cold 
• No water entering the machine 
• Leaks around the valve area 

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

The Clamp is an OEM component specifically designed for select Bosch front-loading washers. As an adjustable mechanism, it secures tub components within acceptable alignments throughout spin cycles.  

Symptoms signaling the need for a new clamp include:

• Increased vibrations from tub or suspension movements exceeding specifications
• Difficulty starting or uneven spin balance detections by diagnostics sensors  
• Loosened or missing fasteners releasing adjustments subject to shifts

Causes related to fatigue cracks developing over prolonged wash cycles equating to years of use. Submersion in cleaning chemicals may also embrittle synthetic portions more rapidly. 

This OEM Bosch replacement clamp is also compatible with Thermador, Gaggenau, and some Kenmore washers.

The Door Clamp is an OEM replacement part for Bosch front-loading washing machine models. Located internally at the edge of the washer door, it secures the door liner firmly in place.

Causes of a bad clamp include cracks developing from repeated door openings/closings, and deterioration of mounting points from constant vibration feedback stressing plastic fasteners over time.

Symptoms include:

• Excessive door sagging creates gaps for debris/moisture entry
• Noisy rattling or shaking from compromised seal integrity
• Difficulty opening/closing the door smoothly

This genuine Bosch replacement is compatible also with Siemens washers.. 

This tub shock absorber helps control drum movement and reduce vibration during spin, keeping your washer stable and quiet. Replacing a worn shock restores smoother operation and helps prevent excess shaking that can lead to noise and wear.

• Damps tub movement to minimize vibration and noise during spin
• Helps prevent "walking," banging, and excessive shaking
• Can contribute to unbalanced loads or longer spin times when worn
• Common fix for thumping sounds and visible drum oscillation

• Unplug the appliance and turn off water before servicing
• Access typically requires removing the front or rear panel
• Support the tub before disconnecting old shock; replace in matched pairs when applicable
• Verify secure seating of pins/fasteners and test for smooth suspension travel

The Hot Water Inlet Hose is an OEM replacement part for Bosch washers. It serves as a flexible supply line that delivers hot water from an external water heating hot water heater directly to the washer. This hose plays a key role in optimizing wash performance through consistent delivery of hot water for optimal cleaning and sanitization. 

Causes of a bad hot water inlet hose can include wear and tear over time, repetitive flexing weakening the hose material, mineral buildup restricting flow, or damage due to sharp edges or crushing forces.

Symptoms of a bad hot water inlet hose include: 

• Loss or reduction of hot water during wash cycles
• Decreased cleaning ability from insufficient water heating 
• Visible kinks, cracks, or splits along the hose body
• Leaks or drips at hose connections under the washer

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Boot Gasket is an OEM component specifically designed for select Bosch front-loading washing machines. Sealing the inner door opening, its flexible silicone maintains a humidity barrier. Proper sealing prevents wasted utilities from poorly managed airflow.

Symptoms of a faulty boot gasket commonly involve cracking that creates moisture escapes. Dehydrated fragments lose sealing properties necessitating change.

Causes of a bad boot gasket relate to natural drying processes hardening material. Repeated impacts introduce splits requiring timely replacement.

Causes of a bad boot gasket can involve:

• Growths of mildew or fungus within the appliance 
• Unusual odors in the laundry room   
• Drips or puddles on the washer door or nearby floor

This OEM Bosch part is also compatible with some Siemens, Miele, and Asko washing machines. Replace to preserve controlled airflow trapping heat and moisture indoors for utility-economical performance through years of use.
 

The Tub Seal is an OEM part for Bosch washing machines. This part prevents water from leaking from the rear part of the drum where it connects to the machine's other components. This seal is specifically engineered to handle the rigorous environment of a washing machine, dealing with constant exposure to water, high spin speeds, and fluctuations in temperature. 

Causes of deterioration in a tub seal include aging and wear over time, chemical damage from detergents, and physical stress from unbalanced loads or excessive spin speeds. 

Symptoms of a bad Tub Seal include:

• Water leaking from the back of the washer, especially during or after the spin cycle
• Unusual noises such as grinding or squeaking, which may indicate that water has seeped into bearings or other components
• An increase in humidity or wetness around and behind the machine
• Rust or corrosion on nearby metal parts, suggesting prolonged exposure to leaking water

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Drive Motor is an OEM replacement part for Bosch washing machines. This powerful motor is responsible for driving the drum rotation during the wash and spin cycles.

A bad drive motor can occur due to electrical faults, mechanical issues, or normal wear and tear over time. Signs of a faulty drive motor include the drum not spinning or agitating, unusual noises coming from the motor, or the washer not starting at all.

Symptoms of a bad drive motor include:

• The drum not spinning or agitating  
• Unusual noises
• The washer not starting  

Replace your faulty washer drive motor with this genuine OEM Bosch part to restore your washing machine. This Bosch part can also be used on Thermador and Gaggenau appliances.
 

The Cover is an OEM part for Bosch washing machines. This part covers and protects the door hinge mechanism, maintaining the sleek appearance of the appliance while preventing dust, lint, and moisture from compromising the hinge's functionality.  

Causes for the need to replace the Cover often stem from physical impacts during loading or unloading, general wear over time, or exposure to harsh cleaning chemicals that can degrade the material of the cover.

Symptoms of a bad Cover include:

• Visible cracks or breakage that can lead to moisture and debris entering the hinge area.
• A loose fit, which may cause noise during operation or interfere with the door's ability to close properly.
• Wear and tear that diminishes the aesthetic appeal of the appliance, making it look outdated or poorly maintained.

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

The Laundry Deflector Kit is an OEM part for Bosch washing machines. This kit includes baffles that are installed inside the washer drum. The baffles play a crucial role in improving the washing action by lifting and tumbling clothes during the cycle, which helps ensure a thorough clean and efficient water usage.  

Causes of a bad Laundry Deflector Kit can include physical damage such as cracking or breaking, which can occur from heavy or improper loads. Wear and tear over time from regular use also contributes to baffle deterioration.

Symptoms of a bad Laundry Deflector Kit include:

• Clothes not moving or tumbling correctly inside the drum
• Increased noise during a wash cycle
• Unusual wear or damage to clothing
• Parts of the baffle detaching or missing

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This sleeve is a small guide/bushing used in select Bosch-built appliances. It spaces and supports a moving component to keep it aligned and reduce friction, helping the mechanism operate smoothly and quietly.

• Acts as a bushing/spacer around a pin or shaft to guide motion
• Helps maintain alignment of connected parts
• Reduces friction and wear between mating surfaces
• A worn or missing sleeve can cause wobble, rough movement, or squeaking/clicking noises

• Disconnect power and shut off water before servicing
• Note the sleeve's orientation and seated depth during removal to match on installation
• Inspect the mating pin/shaft and surrounding parts; replace if worn for best fit
• Verify smooth movement by hand before reassembly and testing

Hose-inlet directs incoming water from the household supply into the appliance's inlet assembly to allow normal filling and prevent leaks. Replace a cracked or damaged inlet hose to stop visible leaks and restore proper water fill. What it does:

• Routes water from the home supply to the appliance inlet assembly.
• Stops leaks caused by cracks, splits, hardened or collapsed hose material.
• Can cause slow fill, no fill, or visible leaks at the connection when damaged.
• Used as a replacement part where the original inlet hose is worn or leaking.

• Always shut off the water supply and disconnect power before starting work.
• Drain remaining water from lines and have towels handy to catch residual water.
• Inspect fittings and seals; replace clamps or O-rings if worn to ensure a watertight connection.
• After installation, restore water and power and check all connections for leaks.

This replacement screw secures appliance panels, brackets, and internal components so your unit stays assembled, aligned, and quiet. Replace stripped, missing, or corroded screws to restore a tight fit and help prevent vibration or leaks.

• Fastens panels, trim, brackets, or internal parts in their correct position
• Helps maintain alignment and sealing to reduce noise and potential leaks
• Replaces worn, stripped, rusted, or lost hardware
• Common symptoms: loose or rattling panel/handle, misaligned parts, components shifting

• Disconnect power and, if applicable, shut off water before servicing
• Match the head/size to the original hardware; do not mix lengths across locations
• Start threads by hand to avoid cross-threading; tighten snugly without over-torque
• For plastic or thin sheet metal, avoid overtightening to prevent stripping or cracking