Wfw79hebw0 Parts

This touch-up paint restores small chips and scratches on painted appliance surfaces to improve appearance and slow corrosion. It's a simple cosmetic repair that helps appliances look cared-for between major services. What it does:

• Covers minor paint chips, nicks and surface scratches
• Helps restore a uniform finish on exterior panels and trim
• Reduces likelihood of surface rust where bare metal is exposed
• Ideal for spot repairs on visible areas without repainting large panels

• One touch-up paint item for appliance finish

• Work in a well-ventilated area and protect surrounding surfaces
• Shake well and test on an inconspicuous spot before applying
• Apply sparingly in thin coats; allow each coat to dry per product instructions
• Keep out of reach of children and away from open flame

This small replacement clip secures a press (push) switch to the appliance control panel so the switch stays aligned and operates reliably. It restores proper button engagement and prevents the switch from working loose. What it does:

• Holds the press/push switch firmly in the control panel or console
• Keeps the switch aligned so button presses register correctly
• Helps stop intermittent or loose-feeling buttons caused by a failing retainer
• Prevents the switch from shifting or falling out during use

• Disconnect power before starting any repair to avoid shock or injury
• Access typically requires removing the control panel or console—retain screws and note their locations
• Clip installs by snapping into the panel and seating the switch; small pliers may help with alignment

This replacement trap sits in the dishwasher's sump/filtration area and captures larger food particles before they reach the pump. It helps maintain cleaning performance and reduce clogs that can lead to poor wash results or draining issues.

• Screens debris to protect the wash and drain pump
• Helps maintain proper water circulation and draining
• Damage or warping can let debris bypass the filter system
• Symptoms include poor cleaning, standing water, unusual grinding noises, or odors

• Disconnect power and shut off water supply before servicing
• Remove the lower rack; take out the lower spray arm and filters to access the trap
• Release the trap's locking tabs/fasteners, remove, and seat the new trap fully
• Reinstall filters and spray arm; run a short cycle to check for leaks and proper operation

This replacement seal restores a tight barrier between mating parts in your appliance, helping contain moisture at the joint. A fresh seal prevents leaks and supports proper performance when the original is worn, cracked, or compressed. What it does:

• Creates a moisture-tight seal between components to contain water at the connection
• Helps prevent drips, pooling, or seepage around the joint
• Replace if the seal is cracked, torn, flattened, deformed, or brittle
• Symptoms can include dampness at the joint, small leaks, or a loose fit

• 1 seal

• Disconnect power and shut off water supply before servicing
• Note the seal's orientation during removal to ensure correct placement
• Clean and dry mating surfaces; remove old residue or debris for a proper seal
• Seat the new seal evenly without twisting; verify full, uniform contact before reassembly

This rotor is the rotating core of the dishwasher's wash motor. Paired with the stator, it spins to drive water circulation through the spray arms, helping restore consistent spray action and cleaning performance.

• Works with the stator to create the magnetic rotation that powers the wash/circulation pump
• Failure can result in little or no spray action and poor cleaning results
• Can lead to intermittent wash or loss of circulation during the cycle

• Disconnect power and water supply before servicing
• Access the wash motor/sump from beneath the unit; removal from the cabinet may be required
• Remove the motor cover/retainer, pull the old rotor straight out, and fully seat the new rotor; handle magnet surfaces carefully
• Reassemble, restore connections, and run a short cycle to check for leaks and proper circulation

This rotor is the rotating component of a motor that helps convert electrical energy into mechanical motion for appliance operation. It replaces a worn or damaged rotor to restore smooth motor rotation and reduce abnormal noise. What it does:

• Spins inside the motor to transfer rotational force to the appliance drive system
• Restores proper motor rotation when a rotor is damaged or scored
• Helps reduce grinding, knocking or excessive vibration caused by a bad rotor
• Works with the motor stator, bearings, and shaft to maintain normal operation

• Disconnect power to the appliance before starting any repair
• Rotor replacement often requires partial motor disassembly; handle bearings and shaft surfaces carefully
• Inspect associated bearings, shaft, and motor housing for wear and replace if needed

This replacement cross-flow hose routes fluid/air between refrigerator components to restore normal operation and stop leaks or drainage issues. Durable black hose designed to match the original fit and function. What it does

• Routes condensate/drain or air between evaporator and drain areas to ensure proper flow
• Replaces cracked, split, or deteriorated hose that can cause leaks or pooling under the unit
• Helps prevent frost or moisture buildup when the original hose is blocked or damaged
• Restores correct drainage/flow where a worn hose caused poor performance or water on the floor

• One black cross flow hose

• Disconnect power to the appliance before starting any repair
• Drain water and remove any clips or clamps carefully to avoid damaging adjacent components
• Inspect and replace associated clamps or seals as needed for a secure, leak-free connection

This wire harness is the factory-style connector assembly that routes power and signals between the appliance control and components, restoring reliable electrical connections for normal operation. What it does

• Re-establishes secure electrical connections between the control board and components so controls and functions respond correctly
• Commonly used when intermittent operation, no power to components, or error codes indicate open/shorted wiring
• Prevents arcing and poor contact caused by damaged or corroded wires and terminals
• Restores proper signal and power paths to switches, motors, heaters or sensors when original harness is faulty

• Disconnect power (unplug or shut off breaker) before inspecting or replacing the harness
• Take photos or label connectors before removal to ensure correct reassembly
• Route and secure the harness away from sharp edges and moving parts; avoid pinching or excessive bending
• If terminals are damaged, replace the harness rather than attempting repairs to ensure safe, reliable connections

This stator is the stationary electrical component that works with the rotor to create the magnetic field needed for motor rotation, restoring proper motor function and helping appliances resume normal operation. What it does

• Generates the magnetic field that interacts with the rotor to drive the motor
• Replaces a worn or damaged stator that can cause humming or failure to spin
• Helps eliminate intermittent operation or reduced torque caused by stator faults
• Works as part of the motor assembly to support reliable appliance performance

• One stator assembly

• Disconnect power before servicing to avoid shock or injury
• Installation requires disassembly of the appliance motor housing
• Inspect rotor, bearings, and mounting hardware while replacing the stator