Wfw94he Parts

This Dispenser Divider installs in the washer's detergent drawer to separate and control liquid or powder detergent in the main-wash compartment. Replacing a worn or missing divider helps restore proper dispensing and more consistent cleaning results.

• Sits in the main-wash section to select liquid or powder detergent
• Directs and regulates water flow for complete detergent siphoning at the right time
• Replaces a cracked, warped, or missing divider that can affect wash performance

• Disconnect power and turn off water supply before servicing
• Pull the dispenser drawer out and depress the release tab to remove it
• Lift out the old divider, clean the compartment, and snap the new divider in the correct orientation (liquid or powder as marked)
• Reinstall the drawer and run a short cycle to verify proper dispensing

This replacement filter traps debris and contaminants within your appliance's system to help protect internal components and maintain proper performance. Swapping a clogged or damaged filter can restore flow/airflow, reduce odors and buildup, and support efficient operation. What it does:

• Captures grease, lint, dust, or food particles to prevent recirculation and protect internal parts
• Supports proper airflow or fluid flow for ventilation, circulation, or drainage
• Helps minimize odors and residue caused by a saturated filter
• Typical signs it's due: visible tears/warping, heavy buildup, restricted airflow/venting, lingering odors

• 1 filter

• Disconnect power before servicing and allow any hot surfaces to cool
• Note the filter's orientation and any tabs/clips; install the new filter the same way
• Clean the surrounding housing or channel before installation
• Do not operate the appliance without required filter(s); follow your model's maintenance schedule

Extends the drain hose approximately 4 feet. You must also order a drain hose connector kit: 285835.

Keep your batch-feed disposer operating safely and easily. This actuator handle inserts into the sink opening to start and stop the disposer and also functions as the sink stopper on batch-feed models, replacing cracked, worn, or missing handles.

• Engages the internal switch to start/stop the disposer when inserted and rotated
• Provides a secure grip for controlled batch-feed operation
• Helps seal the drain to hold water in the sink between uses
• Symptoms include: disposer won't run or runs intermittently with the handle inserted, handle is cracked/loose, or won't lock/turn to engage

• Disconnect power to the disposer before testing or handling parts
• Ensure the sink opening and splash guard are clear so the handle seats fully
• Insert the handle into the drain, align/press down, and rotate per your owner's manual to engage; reverse to stop
• Never place hands inside the disposer; use tongs/pliers to remove objects

This water level pressure switch monitors air pressure from the appliance tub and signals the control when the correct fill is reached. Replacing a faulty switch restores accurate fill levels and allows the cycle to advance properly.

• Detects tub water level via the attached air hose and converts it to an electrical signal
• Instructs the control to start/stop water fill and progress through the cycle
• Helps prevent overfill and underfill conditions
• Common symptoms: continuous filling, no/short fill, incorrect water level, won't advance past fill, or water-level/pressure-sensor errors

• Disconnect power and shut off water supply before servicing
• Access the switch (location varies by model); note hose and wire orientation
• Transfer and secure the air hose and connector(s); ensure the hose/air trap is clear, unkinked, and sealed
• After reassembly, run a fill test to ensure proper operation

Size: 1-1/16 x 5/8 inch. Used for fill hose. For a 4 pack order 285448A

This is the service tech sheet for the appliance. It provides wiring diagrams, diagnostic information, and troubleshooting procedures to help accurately identify and resolve performance issues.

• Contains official diagnostic steps and wiring information
• Helps trace error conditions and electrical problems
• Useful when the unit won't start, won't run cycles, or shows fault codes
• Supports accurate troubleshooting to reduce guesswork

• Disconnect power before servicing the product.
• The sheet is typically stored inside the appliance (often behind an access panel or in the door area).
• Handle with dry hands; avoid smudging or tearing diagrams.
• Re-secure in its original location for future service reference.

Color: Grey

This is a replacement screw designed to work with a wide range of household appliances. It is used for many purposes in these appliances, from holding body panels together to securing electronics into control boards. However, screws are subject to damage through corrosion, impact, and improper installation/removal. In most cases, the primary damage to this screw is through corrosion – it may become rusted or corroded in place, depending on the appliance and the maintenance provided during its lifespan. The screw may also be stripped or rounded due to improper removal or installation. If the screw is damaged, lost, or corroded in place, it will need to be replaced. In most cases, removal will require nothing more than a Phillips head screwdriver or the appropriately sized socket with a ratchet. However, if the screw is damaged, it may require a tap set to remove it from its mounting location. Note that this is a genuine OEM replacement screw made from durable, high-quality metal, and is sold individually. It fits Whirlpool, Maytag, Roper, Estate, Amana, Crosley, and Thermador appliances. It is used in over 150 machines, ranging from washers and dryers to air conditioners.

This set of washer fill hoses connects your home's hot and cold water supply to the washer's inlet valves. Replacing aging hoses helps prevent leaks and ensures the washer fills properly for every cycle.

• Supplies hot and cold water from household faucets to the washer's inlet valves
• Helps address leaks, bulges, or cracks in old hoses
• Can resolve drips at fittings and water on the floor
• Improve slow or no-fill issues caused by kinks or internal blockages

• Unplug the washer and turn off both water supplies before starting
• Place a towel or pan to catch residual water; disconnect old hoses from faucets and inlet valves
• Attach new hoses to the correct hot/cold connections; tighten connections securely without overtightening
• Open valves, check for leaks at both ends, and re-tighten if needed

Contains two, six foot long braided hoses with 90 degree ends.

This washer bellow is the flexible door boot seal that creates a watertight barrier between the front tub and the door opening. Replacing a damaged or leaking bellow restores proper sealing and helps prevent water on the floor.

• Forms the watertight seal between the outer tub and the door opening on front-load washers
• Helps redirect splash and residual water back into the tub
• Common failure symptoms: water leaking from the door/front, visible tears or cracks, or a loose/sagging seal
• Can contribute to musty odors when torn or not seated properly

• Disconnect power and turn off water before servicing; wear cut-resistant gloves
• Open the door, release the outer retaining band, and access the inner clamp per your model's procedure
• Note orientation and any hose/port connections; seat the new bellow evenly on the tub and front panel
• Reinstall clamps securely and run a short test cycle to check for leaks

This RFI noise filter conditions the AC power entering your microwave, reducing electrical interference and helping protect and stabilize the control and power circuits. Replace it if the unit is dead or trips a breaker when starting.

• Filters radio-frequency/electromagnetic noise on the incoming AC line
• Helps stabilize power to the control, relays, lights, and fans
• Failure may cause no display or intermittent loss of power
• A shorted filter may blow the line fuse or trip the household breaker when plugged in or when Start is pressed

• Disconnect power by unplugging the microwave or switching off the dedicated circuit breaker
• For over-the-range units, remove the microwave from the wall to safely access internal components
• Label and transfer wires to matching terminals; mount the filter securely and route wiring away from sharp edges

Size: 29 1/4 inches x 31 1/4 inches. This universal washer drip tray is large enough for duet washers and sits under the washer to protect your floors from scuffs, spill, etc. Includes a PVC drain fitting.

Includes water temperature sensor.

The Screw is an OEM component compatible with Whirlpool washing machines. This screw secures the rear panel onto the cabinet frame, ensuring a sturdy connection between housing components.  Proper installation is critical for the washer's structural integrity.

Causes of a bad screw include corrosion from repeated water exposure or stresses from years of use. Loosening can occur from vibrations weakening the threads over time. 

Symptoms of a bad screw include:

• Rear panel detaching from frame opening gaps
• Increased noise and vibrations from a compromised seal  
• Stress on other connections from improper mounting points
• Potential leak paths from openings near hoses or tub areas

This OEM Whirlpool replacement screw helps maintain a tight panel closure. It is compatible with additional brands like Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.