Wrf560setm05 Parts

This is a rubber gasket that seals the connection between the water fill tube and the ice maker assembly inside the freezer compartment. It prevents water from leaking around the fill tube during the ice maker's fill cycle. Replace this gasket if you notice water dripping or ice buildup around the fill tube area, or if water is leaking onto the freezer floor during ice production.

Secures the roller pin in refrigerator drawer and track assemblies. Replace if missing, bent, or broken to prevent bins from tilting, binding, or dropping.

Protective seal grommet for hoses, tubes, or wires passing through refrigerator cabinet. Replaces cracked, worn, or missing grommets to prevent leaks.

Replace your refrigerator door gasket to restore a tight seal and prevent air leaks. Worn gaskets cause energy loss and temperature issues. Verify fit.

Collects defrost water from the evaporator and directs it to the drain. Replace if cracked, broken, or leaking to prevent water pooling under your fridge.

Color: Grey

This is a replacement screw designed to work with a wide range of household appliances. It is used for many purposes in these appliances, from holding body panels together to securing electronics into control boards. However, screws are subject to damage through corrosion, impact, and improper installation/removal. In most cases, the primary damage to this screw is through corrosion – it may become rusted or corroded in place, depending on the appliance and the maintenance provided during its lifespan. The screw may also be stripped or rounded due to improper removal or installation. If the screw is damaged, lost, or corroded in place, it will need to be replaced. In most cases, removal will require nothing more than a Phillips head screwdriver or the appropriately sized socket with a ratchet. However, if the screw is damaged, it may require a tap set to remove it from its mounting location. Note that this is a genuine OEM replacement screw made from durable, high-quality metal, and is sold individually. It fits Whirlpool, Maytag, Roper, Estate, Amana, Crosley, and Thermador appliances. It is used in over 150 machines, ranging from washers and dryers to air conditioners.

This TSD2 115V compressor start device helps a refrigerator or freezer's compressor start reliably by providing the correct electrical assist at startup. Replacing a failing unit can help restore cooling consistency and stop repeated clicking or brief humming.

• Provides the initial start assist to the hermetic compressor on 115V systems
• Automatically disengages the start winding once the motor reaches speed
• Helps reduce hard-start short cycling
• Failure symptoms include warm temperatures, intermittent cooling, clicking from the rear, or the compressor humming briefly and shutting off

• Disconnect power before servicing
• Note terminal orientation; push straight onto compressor pins without bending
• Transfer the separate overload protector and cover if your unit uses them
• If the compressor still won't start after replacement, further diagnosis of the compressor, overload, or supply voltage may be required

This orifice is a small precision component used in the refrigerator's cooling system to regulate refrigerant or gas flow. It is typically located near the evaporator or cooling circuit and helps control the rate at which refrigerant enters the evaporator coil. Replace this part if the refrigerator or freezer section is not cooling properly, frost patterns are uneven, or a technician has identified a restricted or damaged orifice during diagnosis.

Channels defrost water from the drain outlet to the pan. Replace if cracked, disconnected, or clogged to prevent water pooling inside or leaking onto floor.

This is the fan blade that attaches to the condenser fan motor, typically located near the bottom rear of the refrigerator. It draws air across the condenser coils to dissipate heat and keep the refrigerator running efficiently. Replace this blade if it is cracked, warped, or broken, which can cause loud noises, reduced cooling performance, or the compressor overheating.

Touch-up paint for appliances. Covers chips, scratches, and worn areas on range tops, refrigerators, and other appliances. Includes brush applicator.

This white plastic thimble is a trim piece that fits into the refrigerator door, covering a hole or passage point for wiring or tubing. It provides a clean, finished appearance and helps insulate the opening. Replace this thimble if it is cracked, missing, or discolored, which can affect the door's appearance and insulation.

Mounts in the dispenser to secure the ice housing assembly. Keeps the chute and door aligned for smooth dispensing. Replace if cracked, broken, or worn.

Fix a warm refrigerator or freezing issues with this damper control. Regulates airflow between freezer and fridge. Common repair for temperature problems.

Adjustable track that refrigerator shelves glide on. Replace if bent, dented, or shelves no longer slide smoothly. Confirm fit with your model number.