Wrx998sibm01 Parts

This refrigerator control board is made by Whirlpool. The refrigerator control board is responsible for managing and monitoring all functions of the refrigerator, including cooling and defrosting the freezer. It manages the compressor cycles, lights, and more.Signs that the refrigerator control board may need to be replaced include the refrigerator not cooling properly, or not cooling at all. The freezer may not work properly, or the lights may fail to turn on when the door opens. Replacing the control board will require first unplugging the refrigerator, so transfer any perishable goods that may go bad to a safe location while replacing this part. The control board is located on the back of the refrigerator, so it will need to be pulled out and the access panel removed.This genuine OEM part is sold individually. It is compatible with Whirlpool, Maytag, Kenmore, and KitchenAid refrigerators.

This rear roller is a replacement for the rollers in a refrigerator. The rollers are not used often, but they have an important purpose. They make it easier to move the refrigerator from one area to another. If the roller had been damaged and is not working properly, it will be difficult to maneuver the refrigerator. Replacing the damaged roller with a new one before moving the refrigerator a long distance is a good idea.The rollers on the refrigerator are meant to handle a lot of pressure. However, they can still wear down and break eventually. They could also be damaged during a previous move. Before replacing the rear roller, unplug the refrigerator and remove the connection to the water supply. The replacement will require only a few tools, such as a screwdriver. It may require moving other parts of the refrigerator to get access to the rear rollers.The rear roller will work for certain models of refrigerators from Whirlpool, GE, KitchenAid, Inglis, Maytag, Admiral, International, Amana, Jenn-Air, Crosley, and Magic Chef. This is a genuine OEM replacement part that is sold individually.

This replacement roller supports the refrigerator's upper drawer pan and lets it glide smoothly on its tracks. Replace a worn or broken roller to restore easy, even drawer movement and reduce sticking or grinding noises.

• Supports and guides the upper refrigerator drawer pan as it opens and closes
• Helps keep the drawer aligned and level on its rails
• Replaces a cracked, seized, or missing roller
• Typical symptoms: drawer sticks or drags, tilts on one side, noisy operation, or the pan jumps off the track

• Disconnect power and remove the affected drawer pan before servicing
• Release and remove the damaged roller; retain any screws or clips for reuse
• Install the new roller in the same orientation; transfer/reuse hardware as needed
• Test drawer travel for smooth, level operation before reloading

This replacement screw secures specified refrigerator components—such as covers, brackets, and internal panels—so they stay properly mounted. Replace a missing, stripped, or corroded fastener to restore a tight, rattle-free fit and reliable operation.

• Provides the correct fastener for locations identified in your model's parts diagram
• Helps prevent looseness, vibration, and rattling of panels or brackets
• Replace if the head is stripped, threads are worn, or the screw is missing
• Symptoms can include loose parts, gaps, or noises from movement

• Unplug the refrigerator and shut off water if working near the ice maker or dispenser
• Match length and type to the original; follow your model's parts diagram for placement
• Start threads by hand to avoid cross-threading; tighten snugly without over-torquing, especially into plastic
• Keep track of screw positions; do not mix different screw lengths or styles

The Drawer Roller Axle is an OEM component specifically designed for Whirlpool refrigerators. It facilitates smooth opening and closing of sliding shelves and bins.  

Causes of a faulty roller axle can include normal wear from long-term use that compromises bearings. Corrosion may build after exposure to food debris or moisture.

Symptoms of a bad drawer roller axle include:

• Sliding parts failing to glide effortlessly or becoming stuck  
• Drawers unable to support intended weight loads
• Premature friction causing difficulty accessing bins

This OEM Whirlpool part is compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore refrigerator models as well.

The Cntrl-Elec is an OEM part for Whirlpool refrigerators. It is the electronic control board that coordinates functions of the refrigerator like temperature regulation, defrost cycles, lights, dispensers and more. The board communicates signals between components and the digital interface.

Causes of a bad control board can include moisture damage, electrical surges, or component failures over time. As the main "brain" of the unit, issues here will affect overall operation.

Symptoms of a bad control board include: 

• Appliance not cooling or freezing properly
• Inability to adjust temperature settings  
• Lights or other features not working
• Error codes displayed

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This gasket forms a tight seal between mating surfaces inside your appliance to help contain air or water and maintain proper performance. Replacing a worn or damaged gasket restores reliable sealing and helps prevent leaks or escapes. What it does:

• Maintains an airtight/watertight seal between components
• Helps prevent leaks, drips, and moisture or air escaping
• Supports correct temperatures and operating efficiency
• Common signs of failure: visible cracks or flattening, leaking, moisture around the joint, or poor sealing

• 1 gasket

• Disconnect power; shut off water supply if applicable
• Note gasket orientation before removal and clean mating surfaces
• Seat the gasket evenly without stretching or kinking
• Reassemble and test for proper seal and any leaks

This grille is a decorative exterior cover for your appliance. It conceals openings or component areas while preserving the unit's intended airflow and clean, finished appearance. Replacing a cracked or missing grille restores a secure fit and look. What it does

• Covers and protects an opening or component area while allowing proper clearance/airflow as designed
• Helps prevent debris from entering sensitive areas
• Restores a clean, finished front appearance
• Common symptoms: cracked or warped grille, broken mounting tabs, loose/rattling panel, missing piece

• 1 grille

• Disconnect power before servicing the appliance
• Remove retaining screws or release locking tabs; retain existing hardware for reuse
• Align tabs/hooks, seat the grille, and secure; do not overtighten screws
• Confirm a snug fit and unobstructed openings before restoring power

The Thermistor is an OEM part for Whirlpool refrigerators. As a temperature-sensitive sensor, it tracks compartment climates to maintain fresh food safety.

Causes of a bad thermistor involve cracking of its insulated body allowing moisture, as well as typical wear disrupting conductivity after years of use. 

Symptoms include: 

• Fluctuating temperatures conducive to bacterial growth  
• Constant compressor operation without reaching targets
• Error codes or inability to adjust temperature settings

This OEM Whirlpool part is also compatible with some Kenmore, Maytag, and KitchenAid models.

This small pad fits under a cooktop/range burner grate to cushion and stabilize it, helping prevent wobble and surface scratches. Replacing worn or missing pads keeps the grate level and protects the cooktop finish. What it does:

• Supports and levels the burner grate at its contact points
• Reduces rattling and movement during cooking
• Helps prevent metal-on-metal scraping and scratches on the cooktop
• Replace if pads are missing, flattened, brittle, or the grate rocks

• 1 pad

• Allow the appliance and grates to cool completely; disconnect power/gas if servicing near burners
• Remove the grate; clean old pad residue and thoroughly dry the contact area
• Press the new pad firmly into place; replace all pads on a grate for even height
• Avoid harsh solvents that can damage enamel or stainless finishes

This grommet is a small protective seal used where a hose, tube, wire, or component passes through or mounts to the appliance cabinet. It cushions the connection and helps prevent leaks, vibration, and wear for reliable operation.

• Provides a snug barrier between parts and metal openings to protect hoses, tubes, and wiring
• Helps seal against moisture to reduce seepage
• Dampens vibration and rattling noises
• Replace if cracked, hardened, missing, or no longer stays seated; symptoms may include drips at a pass-through, buzzing/rattling, or a loose fit

• Disconnect power; shut off water supply if applicable
• Access the grommet location and note orientation/routing
• Remove the old grommet and clean the opening
• Press the new grommet fully into place; reassemble and test for leaks/noise

This hinge screw secures the door hinge to the appliance cabinet or door. Replacing a missing or stripped screw restores a tight, aligned hinge connection for smooth opening and reliable sealing.

• Fastens the hinge to the frame or door to prevent looseness
• Helps maintain door alignment for smooth opening/closing
• Direct replacement for lost, rusted, or stripped hinge screws
• Common symptoms: loose hinge, door sagging, rubbing/binding, or poor sealing

• Disconnect power before service; if working on a refrigerator, also shut off the water supply
• Support the door before loosening or tightening hinge hardware
• Start threads by hand to avoid cross-threading; tighten securely without over-torquing

This freezer bin is a direct-fit replacement drawer that restores usable storage and containment in the freezer compartment. It helps organize frozen foods and prevents spills when the original bin is cracked, broken, or missing. What it does:

• Replaces a damaged or missing freezer drawer so frozen items stay contained and organized.
• Fits into the freezer track to restore proper storage alignment and accessibility.
• Helps prevent spills and loss of small items that can fall behind shelves or into the evaporator area.
• Appropriate when the original bin is cracked, warped, or no longer supports stored food.

• Always unplug or disconnect power to the appliance before starting any service.
• Remove food and any shelves or drawers that block access before removing the old bin.
• Lift and slide the bin out of the track carefully; align and slide the new bin into the track until fully seated—do not force.
• If any track clips or supports are damaged, replace them as needed; inspect surrounding parts for wear while installing.

This extension is a replacement support bracket designed to restore proper spacing and alignment for the associated assembly, helping reduce rattles and maintain correct part fit for reliable appliance operation. What it does

• Restores proper spacing or reach where an original extension or support is worn, bent, or missing
• Helps keep linked components aligned to prevent rubbing, noise, or premature wear
• Supports secure mounting of the adjoining part so assemblies stay stable during use
• Common symptom: unusual vibration, misalignment, or intermittent contact where the original extension is damaged

• Extension bracket

• Disconnect power (and gas, if applicable) before beginning any repair
• Remove only the panels and fasteners necessary to access the damaged extension
• Compare the new extension to the old part for correct orientation before fastening
• Tighten hardware to secure fit but avoid over-torquing; test operation after reassembly

This LED power supply, sometimes called an inverter box, converts household AC power to the regulated output your refrigerator's LED lighting system requires. Replacing a failing unit restores bright, consistent interior illumination and prevents flicker or intermittent lighting.

• Converts AC line voltage to the correct low-voltage/constant-current power for LED light modules
• Ensures uniform, reliable illumination when doors are opened
• Helps protect LED modules from unstable voltage
• Common failure symptoms: all interior lights out, dim or flickering lights, or lights that work intermittently

• Unplug the refrigerator or switch off the circuit breaker before servicing
• Access location varies by model; refer to your parts diagram or service information
• Move connectors one at a time to the matching terminals; do not force or damage pins
• Secure the module in the original position, restore power, and verify all LED lights operate

Bottle with brush. Color: Biscuit paint. It's point-six fluid ounces.