Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Connects inlet valve to water system in your refrigerator. Replace if cracked, kinked, or leaking at connections to restore leak-free water flow.
Water line coming out of inlet valve to ice maker was cracked. Removed the paperboard cover from the bottom of the back of the fridge, then unplugged the water line going from the inlet valve to the ice maker. Wasn't sure this new tube was going to work, because the original had an elbow on it. Fit just fine. Removed grille from front and disconnected other end of ice maker water line. Attached new line and now I have ice! Read more
Secures the filter cartridge and channels water through your refrigerator. Replace if cracked, leaking, or causing dispensing issues. Confirm fit by model.
Tried several new filters. Finally replacing housing fixed problem. Could not find any obvious defect in the housing, however, when pushing real hard on the filter door,water would flow.Seems to be some transfer valve inside housing body not properly actuated. Read more
Color: Midnight Grey
Ordered the part. It came in pretty quick and was an exact match. Googled the instructions, followed them step by step. The only thing I did different was I marked the wires so I could put them back right. Took around an hour to replace. Wasn't difficult at all. Read more
Channels ice from maker to dispenser opening. Replace if cracked, broken, or missing to prevent ice scatter and jams. Installs in freezer door dispenser.
Identified and ordered part Read more
Mounts at the bottom hinge to raise and lower the refrigerator door as it swings. Replace if cracked, worn, or broken to restore smooth self-closing.
Covers the lower front of your refrigerator in midnight gray. Replaces cracked, broken, or missing grilles to restore airflow and a finished look.
We are a rehabber of single family homes and purchased a double door stainless steel Kitchen Aid for our new kitchen layout. When we noticed the kickplate missing we went back to the dealer and he furnished us with the wrong size kick plate. As we had the house listed for sale we did not want to start off with a poor impression. We contacted Appliance Parts Pros they identified the proper part and shipped it to us, we received it the next day and we installed it. The kitchen and appliance... Read more
Bottle with brush. Color: Black. Size: 0.6 fl.oz.
Replaced It With New One Read more
Joins sections of your refrigerator's water line for the dispenser and ice maker. Replace when the original coupling is cracked, damaged, or leaking.
Refrigerator door gasket creates an airtight seal to maintain temperature. Replace if torn, cracked, or loose to prevent warm air leaks and energy waste.
Refrigerator not cooling properly? A clogged filter drier prevents proper refrigerant flow. Requires professional installation due to sealed system.
Ordered new Evaporator part and Drier from Appliance Pros. The part arrived earlier than expected and was properly packaged. I had both parts installed by a professional as they required a level of expertise above my capabilities. Works perfectly. Read more
Replace your refrigerator's freezer door gasket to restore proper sealing and energy efficiency. Fixes air leaks and frost buildup. Verify fit with your model.
Ice buildup on evaporator coils? A failed defrost thermostat prevents proper defrost cycles. This bimetal sensor restores defrost heating on schedule.
This ice door motor drives the dispenser's ice chute door, opening to let ice out and closing to seal the chute. Replacing a worn motor restores proper door movement and helps reduce warm-air leaks and frost around the dispenser.
Talked to a service rep. and he helped me diagnose what was needed. Read more
Rear roller that helps move your refrigerator smoothly. Replace if broken, cracked, or wobbling to restore easy mobility. Confirm fit by model number.
Removed all the food from the freezer and most from the fridge before starting. Tipped fridge back until I could place a 2 x 4 a couple of inches behind the front rollers. With the front of the fridge now approximately 3 to 4" off the ground you can remove the adjusting bolt and the roller assembly can be pulled out of the brackets. Slide out of the notches where that hold it into the bracket. Same to install. Read more
Secures door hinge to cabinet for proper alignment and sealing. Replace if missing, stripped, or loose to restore smooth operation. Confirm fit by model.
This is a humidity control component typically found in a refrigerator's crisper drawer area, regulating airflow to maintain optimal moisture levels for fruits and vegetables. It may include a slide mechanism that adjusts a vent opening within the drawer cover or housing. Replace this part if the humidity slider is broken, stuck, or missing, or if produce in the crisper is wilting or accumulating excess moisture.
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.